Commit Graph

10 Commits

Author SHA1 Message Date
Tim Allen 89d47914b9 Update to v102r14 release.
byuu says:

Changelog:

  - (MS,GG,MD)/PSG: flip output bit from noise channel [TmEE]
  - MD/YM2612: rewrite YM2612::Channel functions to
    YM2612::Channel::Operator functions¹
  - MD/YM2612: pitch/octave I/O registers should set reload, not value
    (fixes sound in most games)
  - MD/YM2612: don't try to sign-extend raw PCM values (fixes Shining
    Force opening music)
  - MD/YM2612: various algorithm simplifications; conversions from
    `*`, `/`, `%` to `<<`, `>>`; etc.

Overall ... Sonic the Hedgehog sounds really, really great. Almost
perfect, but there's a bit of clamping going on in the special zones.
Langrisser II sounds really great. Shining Force sounds pretty much
perfect. Bare Knucles (Streets of Rage) does pretty badly ... punches
sound more like dinging a salad fork on a wine glass, heh. Altered Beast
is extremely broken ... no music at the title screen, very distorted
in-game music. I suspect a bug outside of the YM2612 is affecting this
game.

So, the YM2612 emulation isn't perfect, but it's a really good start to
the most complex sound chip in all of higan. Hopefully the VRC7 and
YM2413 will prove to be less ferocious ... not that I'm in any rush to
work on either. The former is going to need the NES mapper rewrite to be
done first, and the latter is cool but not very necessary since all
those games have fallbacks to the inferior PSG audio.

But really ... I can't thank Cydrak enough for doing this for me. It
would have probably taken me months to parse through all of the
documentation on this chip (most of which is in a 55-page thread on
spritesmind that is filled with wrong/outdated information at the start,
and corrections as you go deeper.) Not to mention, learning about what
the hell detuning, low-frequency oscillation, tremolo, vibrato, etc were
all about. Or how those algorithms to compute the final output work. Or
the dozens of special cases littered in there to make everything sound
good. Fierce, nasty chip that.

Now the last real problem is save states ... the Mega Drive is going to
be the trickiest of all to implement with libco. There are lots of areas
where one chip will deadlock another chip while it completes some
operation. We don't have a choice but to force those stalls to abort
anyway, in order to let libco reach the start of its entry point once
again. I don't know what kind of impact that'll have on states ... I
suspect they'll work almost as reliably as the SNES does, but I can't
know that until I implement it. It's going to be pretty nasty, though.

¹: this basically removes a lot of unnecessary op. prefixes and the
need to capture `auto& op = operators[index]` at the start of every
function.

I wanted to have subfunctions like
`YM2612::Channel::Operator::Envelope::run()`, etc but unfortunately,
pretty much all of the envelope, phase, pitch, level functions need to
access each other's state.
2017-03-03 21:45:07 +11:00
Tim Allen 0bf2c9d4e1 Update to v102r13 release.
byuu says:

Changelog:

  - removed Emulator::Interface::videoFrequency(), audioFrequency()¹
  - (MS,GG,MD)/PSG: removed inversion on noise channel LFSR update
    [mic_]
  - MD/PSG: lowered volume to match YM2612 volume
  - MD/YM2612: added Cydrak's emulation of FM channels and LFO²

¹: These were no longer used by the UI. The video frequency is
adaptive on many systems. And the audio frequency is meaningless due to
Emulator::Audio always outputting a consistent frequency specified by
the UI. Plus, take the Genesis where there's two sound chips running at
different frequencies. So, these had to go.

²: Due to some lurking bugs, the audio is completely broken
unfortunately. Will need to be debugged :(

First pass looking for any typos didn't yield any obvious results.
2017-03-02 07:40:55 +11:00
Tim Allen 4c3f9b93e7 Update to v102r12 release.
byuu says:

Changelog:

  - MD/PSG: fixed 68K bus Z80 status read address location
  - MS, GG, MD/PSG: channels post-decrement their counters, not
    pre-decrement [Cydrak]¹
  - MD/VDP: cache screen width registers once per scanline; screen
    height registers once per frame
  - MD/VDP: support 256-width display mode (used in Shining Force, etc)
  - MD/YM2612: implemented timers²
  - MD/YM2612: implemented 8-bit PCM DAC²
  - 68000: TRAP instruction should index the vector location by 32 (eg
    by 128 bytes), fixes Shining Force
  - nall: updated hex(), octal(), binary() functions to take uintmax
    instead of template<typename T> parameter³

¹: this one makes an incredible difference. Sie noticed that lots of
games set a period of 0, which would end up being a really long period
with pre-decrement. By fixing this, noise shows up in many more games,
and sounds way better in games even where it did before. You can hear
extra sound on Lunar - Sanposuru Gakuen's title screen, the noise in
Sonic The Hedgehog (Mega Drive) sounds better, etc.

²: this also really helps sound. The timers allow PSG music to play
back at the correct speed instead of playing back way too quickly. And
the PCM DAC lets you hear a lot of drum effects, as well as the
"Sega!!" sound at the start of Sonic the Hedgehog, and the infamous,
"Rise from your grave!" line from Altered Beast.

Still, most music on the Mega Drive comes from the FM channels, so
there's still not a whole lot to listen to.

I didn't implement Cydrak's $02c test register just yet. Sie wasn't 100%
certain on how the extended DAC bit worked, so I'd like to play it a
little conservative and get sound working, then I'll go back and add a
toggle or something to enable undocumented registers, that way we can
use that to detect any potential problems they might be causing.

³: unfortunately we lose support for using hex() on nall/arithmetic
types. If I have a const Pair& version of the function, then the
compiler gets confused on whether Natural<32> should use uintmax or
const Pair&, because compilers are stupid, and you can't have explicit
arguments in overloaded functions. So even though either function would
work, it just decides to error out instead >_>

This is actually really annoying, because I want hex() to be useful for
printing out nall/crypto keys and hashes directly.

But ... this change had to be made. Negative signed integers would crash
programs, and that was taking out my 68000 disassembler.
2017-02-27 19:45:51 +11:00
Tim Allen 1cab2dfeb8 Update to v102r11 release.
byuu says:

Changelog:

  - MD: connected 32KB cartridge RAM up to every Genesis game under 2MB
    loaded¹
  - MS, GG, MD: improved PSG noise channel emulation, hopefully²
  - MS, GG, MD: lowered PSG volume so that the lowpass doesn't clamp
    samples³
  - MD: added read/write handlers for VRAM, VSRAM, CRAM
  - MD: block VRAM copy when CD4 is clear⁴
  - MD: rewrote VRAM fill, VRAM copy to be byte-based⁵
  - MD: VRAM fill byte set should fall through to regular data port
    write handler⁶

¹: the header parsing for backup RAM is really weird. It's spaces
when not used, and seems to be 0x02000001-0x02003fff for the Shining
games. I don't understand why it starts at 0x02000001 instead of
0x02000000. So I'm just forcing every game to have 32KB of RAM for now.
There's also special handling for ROMs > 2MB that also have RAM
(Phantasy Star IV, etc) where there's a toggle to switch between ROM and
RAM. For now, that's not emulated.

I was hoping the Shining games would run after this, but they're still
dead-locking on me :(

²: Cydrak pointed out some flaws in my attempt to implement what he
had. I was having trouble understanding what he meant, so I went back
and read the docs on the sound chip and tried implementing the counter
the way the docs describe. Hopefully I have this right, but I don't know
of any good test ROMs to make sure my noise emulation is correct. The
docs say the shifted-out value goes to the output instead of the low bit
of the LFSR, so I made that change as well.

I think I hear the noise I'm supposed to in Sonic Marble Zone now, but
it seems like it's not correct in Green Hill Zone, adding a bit of an
annoying buzz to the background music. Maybe it sounds better with the
YM2612, but more likely, I still screwed something up :/

³: it's set to 50% range for both cores right now. For the MD, it
will need to be 25% once YM2612 emulation is in.

⁴: technically, this deadlocks the VDP until a hard reset. I could
emulate this, but for now I just don't do the VRAM copy in this case.

⁵: VSRAM fill and CRAM fill not supported in this new mode. They're
technically undocumented, and I don't have good notes on how they work.
I've been seeing conflicting notes on whether the VRAM fill buffer is
8-bits or 16-bits (I chose 8-bits), and on whether you write the low
byte and then high byte of each words, or the high byte and then low
byte (I chose the latter.)

The VRAM copy improvements fix the opening text in Langrisser II, so
that's great.

⁶: Langrisser II sets the transfer length to one less than needed to
fill the background letter tile on the scenario overview screen. After
moving to byte-sized transfers, a black pixel was getting stuck there.
So effectively, VRAM fill length becomes DMA length + 1, and the first
byte uses the data port so it writes a word value instead of just a byte
value. Hopefully this is all correct, although it probably gets way more
complicated with the VDP FIFO.
2017-02-25 22:11:46 +11:00
Tim Allen 68f04c3bb8 Update to v102r10 release.
byuu says:

Changelog:

  - removed Emulator::Interface::Capabilities¹
  - MS: improved the PSG emulation a bit
  - MS: added cheat code support
  - MS: added save state support²
  - MD: emulated the PSG³

¹: there's really no point to it anymore. I intend to add cheat codes
to the GBA core, as well as both cheat codes and save states to the Mega
Drive core. I no longer intend to emulate any new systems, so these
values will always be true. Further, the GUI doesn't respond to these
values to disable those features anymore ever since the hiro rewrite, so
they're double useless.

²: right now, the Z80 core is using a pointer for HL-\>(IX,IY)
overrides. But I can't reliably serialize pointers, so I need to convert
the Z80 core to use an integer here. The save states still appear to
work fine, but there's the potential for an instruction to execute
incorrectly if you're incredibly unlucky, so this needs to be fixed as
soon as possible. Further, I still need a way to serialize
array<T, Size> objects, and I should also add nall::Boolean
serialization support.

³: I don't have a system in place to share identical sound chips. But
this chip is so incredibly simple that it's not really much trouble to
duplicate it. Further, I can strip out the stereo sound support code
from the Game Gear portion, so it's even tinier.

Note that the Mega Drive only just barely uses the PSG. Not at all in
Altered Beast, and only for a tiny part of the BGM music on Sonic 1,
plus his jump sound effect.
2017-02-23 08:25:01 +11:00
Tim Allen 8071da4c6a Update to v102r09 release.
byuu says:

Changelog:

  - MD: restructured DMA to a subclass of VDP
  - MD: implemented VRAM copy mode (fixes Langrisser II ... mostly)
  - MS: implemened PSG support [Cydrak]
  - GG: implemented PSG stereo sound support
  - MS: use the new struct Model {} design that other cores use

The MS/GG PSG should be feature complete, but I don't have good tests
for Game Gear stereo mode, nor for the noise channel. There's also a
really weird behavior with when to reload the channel counters on volume
register writes. I can confirm what Cydrak observed in that following
the docs and reloading always creates serious audio distortion problems.
So, more research is needed there.

To get the correct sound out of the PSG, I have to run it at 3.58MHz /
16, which seems really weird to me. The docs make it sound like it's
supposed to run at the full 3.58MHz. If we can really run it at
223.7KHz, then that's help reduce the overhead of PSG emulation, which
will definitely come in handy for Mega Drive, and possibly later Mega
CD, emulation.

I have not implemented the PSG into the Mega Drive just yet. Nor have I
implemented save states or cheat code support into the MS/GG cores yet.
The latter is next on my list.
2017-02-21 22:07:33 +11:00
Tim Allen bf90bdfcc8 Update to v101r31 release.
byuu says:

Changelog:

  - converted Emulator::Interface::Bind to Emulator::Platform
  - temporarily disabled SGB hooks
  - SMS: emulated Game Gear palette (latching word-write behavior not
    implemented yet)
  - SMS: emulated Master System 'Reset' button, Game Gear 'Start' button
  - SMS: removed reset() functionality, driven by the mappable input now
    instead
  - SMS: split interface class in two: one for Master System, one for
    Game Gear
  - SMS: emulated Game Gear video cropping to 160x144
  - PCE: started on HuC6280 CPU core—so far only registers, NOP
    instruction has been implemented

Errata:

  - Super Game Boy support is broken and thus disabled
  - if you switch between Master System and Game Gear without
    restarting, bad things happen:
      - SMS→GG, no video output on the GG
      - GG→SMS, no input on the SMS

I'm not sure what's causing the SMS\<-\>GG switch bug, having a hard
time debugging it. Help would be very much appreciated, if anyone's up
for it. Otherwise I'll keep trying to track it down on my end.
2017-01-13 12:15:45 +11:00
Tim Allen bab2ac812a Update to v101r24 release.
byuu says:

Changelog:

  - SMS: extended bus mapping of in/out ports: now decoding them fully
    inside ms/bus
  - SMS: moved Z80 disassembly code from processor/z80 to ms/cpu
    (cosmetic)
  - SMS: hooked up non-functional silent PSG sample generation, so I can
    cap the framerate at 60fps
  - SMS: hooked up the VDP main loop: 684 clocks/scanline, 262
    scanlines/frame (no PAL support yet)
  - SMS: emulated the VDP Vcounter and Hcounter polling ... hopefully
    it's right, as it's very bizarre
  - SMS: emulated VDP in/out ports (data read, data write, status read,
    control write, register write)
  - SMS: decoding and caching all VDP register flags (variable names
    will probably change)
  - nall: \#undef IN on Windows port (prevent compilation warning on
    processor/z80)

Watching Sonic the Hedgehog, I can definitely see some VDP register
writes going through, which is a good sign.

Probably the big thing that's needed before I can get enough into the
VDP to start showing graphics is interrupt support. And interrupts are
never fun to figure out :/

What really sucks on this front is I'm flying blind on the Z80 CPU core.
Without a working VDP, I can't run any Z80 test ROMs to look for CPU
bugs. And the CPU is certainly too buggy still to run said test ROM
anyway. I can't find any SMS emulators with trace logging from reset.
Such logs vastly accelerate tracking down CPU logic bugs, so without
them, it's going to take a lot longer.
2016-12-17 22:31:34 +11:00
Tim Allen 0b70a01b47 Update to v101r10 release.
byuu says:
Changelog:

  - 68K: MOVEQ is 8-bit signed
  - 68K: disassembler was print EOR for OR instructions
  - 68K: address/program-counter indexed mode had the signed-word/long
    bit backward
  - 68K: ADDQ/SUBQ #n,aN always works in long mode; regardless of size
  - 68K→VDP DMA needs to use `mode.bit(0)<<22|dmaSource`; increment by
    one instead of two
  - Z80: added registers and initial two instructions
  - MS: hooked up enough to load and start running games
      - Sonic the Hedgehog can execute exactly one instruction... whoo.
2016-08-20 00:11:26 +10:00
Tim Allen 043f6a8b33 Update to v101r08 release.
byuu says:

Changelog:

  - 68K: fixed read-modify-write instructions
  - 68K: fixed ADDX bug (using wrong target)
  - 68K: fixed major bug with SUB using wrong argument ordering
  - 68K: fixed sign extension when reading address registers from
    effective addressing
  - 68K: fixed sign extension on CMPA, SUBA instructions
  - VDP: improved OAM sprite attribute table caching behavior
  - VDP: improved DMA fill operation behavior
  - added Master System / Game Gear stubs (needed for developing the Z80
    core)
2016-08-17 22:31:22 +10:00