mirror of https://github.com/bsnes-emu/bsnes.git
24 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
0034adab3b |
Update to v104 public release.
[As mentioned in the v104 internal release notes, byuu fixed a small typo in the GBA core. -Ed.] byuu says: There are lots of improvements in this new release, both to core emulation and to the user interface. However, some of these changes are quite substantial, so regressions are a possibility. Please report any regressions from v103 on the forums if found. Note that Mega Drive save RAM files will not be compatible with v103, but will now be compatible with save RAM files from all other Mega Drive emulators, and the format will be stable going forward. Also!! Thanks to the tireless work of Screwtape, the Help->Documentation link in higan now takes you to a very comprehensive user guide. Please be sure to consult this if you have any questions about using higan. Lastly, I've added a link to my Patreon page (https://patreon.com/byuu/) to the higan downloads page. The money will go exclusively toward purchasing SNES games for preservation, hardware and flash carts for reverse engineering, equipment such as backup drives, etc. Donating is entirely optional and comes with no rewards, but would of course be greatly appreciated! ^^; Changelog (since v103): - nall/dsp: improved first-order IIR filtering - Famicom: improved audio filtering (90hz lowpass + 440hz lowpass + 14khz highpass) - Game Boy Advance: corrected bug in PSG wave channel emulation [Cydrak] - Mega Drive: added first-order 2.84KHz low-pass filter to match VA6 model hardware - Mega Drive: lowered PSG volume relative to YM2612 to match VA6 model hardware - Mega Drive: Hblank flag is not always set during Vblank - Mega Drive: fix PAL mode reporting from control port reads - Famicom: improved phase duty cycle emulation (mode 3 is 25% phase inverted; counter decrements) - Mega Drive: reset does not cancel 68K bus requests - Mega Drive: 68K is not granted bus access on Z80 reset - Mega Drive: CTRL port is now read-write, maintains value across controller changes - Z80: IX, IY override mode can now be serialized in save states - 68K: fixed calculations for ABCD, NBCD, SBCD [hex\_usr, SuperMikeMan] - SPC700: improved all cycle timings to match results observed by Overload with a logic anaylzer - Super Famicom: SMP uses a separate 4x8-bit buffer for $f4-f7; not APU RAM [hex\_usr] - Super Famicom: SMP TEST register is now finally 100% fully emulated [byuu, AWJ] - Game Boy Advance: DMA can run between CPU instruction cycles - Game Boy Advance: added 2-cycle delay between DMA activation and transfers - higan: improved aspect ratio correction accuracy at higher video scaling sizes - higan: overscan masking will now actually crop the underlying video instead of just blanking it - Mega Drive: center video when overscan is disabled - higan: added increment/decrement quick save slot hotkeys - Game Boy Advance: fixed wave RAM nibble ordering (fixes audio in Castlevania, Pocket NES) - higan: added new adaptive windowed mode: resizes the window to the current emulated system's size - higan: added new integral scaling mode: resizes the window to fill as much of the screen as possible - higan: main window is now resizable and will automatically scale contents based on user settings - higan: fixed one-time blinking of the main window on startup caused by focus stealing bug - ruby: fixed major memory leak in Direct3D driver - ruby: added fullscreen exclusive mode to Direct3D driver - Super Famicom: corrected latching behavior of BGnHOFS PPU registers - higan: all windows sans the main viewport can be dismissed with the escape key now - ruby: complete API rewrite; many audio drivers now support device selection - higan: output frequency can now be modified - higan: configuration settings split to individual menu options for faster access to individual pages - ruby: improved WASAPI driver to event-driven model; more compatible in exclusive mode now - libco: fix compilation of sjlj and fiber targets [Screwtape] - ruby: added YV12 and I420 support to X-Video driver - Game Boy: added TAMA emulation (RTC emulation is not working yet) [thanks to endrift for notes] - Game Boy: correct data ordering of MMM01 ROMs (MMM01 ROMs will need to be re-imported into higan) - Game Boy: store MBC2 save RAM as 256-bytes instead of 512-bytes (RAM is 4-bit; not 8-bit with padding) - Game Boy: fixed a bug with RAM serialization in games without a battery - Mega Drive: fix CRAM reads (fixes Sonic Spinball) [hex\_usr] - Game Boy: added rumble support to MBC5 games such as Pokemon Pinball - Game Boy: added MBC7 emulation (accelerometer X-axis, EEPROM not working yet) [thanks to endrift for notes] - hiro: macOS compilation fixes and UI improvements [MerryMage, ncbncb] - Game Boy: added MBC6 emulation (no phone link or flash support; timing bugs in game still) - Game Boy: HDMA syncs to other components after each byte transfer now - Game Boy: disabling the LCD completely halts the PPU (fixes onscreen graphical corruption in some games) - Mega Drive: added 6-button Fighting Pad emulation [hex\_usr] - 68K: TAS sets d7 when EA mode is a direct register (fixes Asterix graphical corruption) - Game Boy: STAT mode is forced to zero when LCD is disabled (fixes Pokemon Pinball) - LR35902: complete rewrite - icarus: high-DPI is not supported on Windows yet; remove setting for consistency with higan window sizes - hiro: added full support for high-DPI displays on macOS [ncbncb] - ARM7TDMI: complete rewrite - Super Famicom: disabled channels during HDMA initialization appear to set DoTransfer flag - V30MZ: code cleanup - Mega Drive: added optional TMSS emulation; disabled by default [hex\_usr] - ARM7TDMI: pipeline decode stage caches CPSR.T [MerryMage] - ARM7TDMI: fixed timing of THUMB stack multiple instruction [Cydrak] - higan: detect when ruby drivers crash; disable drivers on next startup to prevent crash loop - Mega Drive: added automatic region detection (favors NTSC-J > NTSC-U > PAL) [hex\_usr] - Mega Drive: support 8-bit SRAM - ARM7TDMI: PC should be incremented by 2 when setting CPSR.T via MSR instruction [MerryMage] - ruby: add Windows ASIO driver support (does not work on some systems due to buggy vendor drivers) - higan: default to safe drivers on a new install; due to instability with some optimal drivers |
|
|
Tim Allen
|
ba384a7c48 |
Update to v104 release.
byuu says:
Changelog:
- emulator/interface: removed unused Region struct
- gba/cpu: optimized CPU::step() as much as I could for a slight
speedup¹
- gba/cpu: synchronize the APU better during FIFO updates
- higan/md, icarus: add automatic region detection; make it the
default option [hex\_usr]
- picks NTSC-J if there's more than one match ... eventually, this
will be a setting
- higan/md, icarus: support all three combinations of SRAM (8-bit low,
8-bit high, 16-bit)
- processor/arm7tdmi: fix bug when changing to THUMB mode via MSR
[MerryMage]
- tomoko: redesigned crash detector to only occur once for all three
ruby drivers
- this will reduce disk thrashing since the configuration file
only needs to be written out one extra time
- technically, it's twice ... but we should've always been writing
one out on first run in case it crashes then
- tomoko: defaulted back to the safest ruby drivers, given the optimal
drivers have some stability concerns
¹: minor errata: spotted a typo saying `synchronize(cpu)` when the CPU
is stopped, instead of `synchronize(ppu)`. This will be fixed in the v104
official 7zip archives.
I'm kind of rushing here but, it's really good timing for me to push out
a new official release. The blocking issues are resolved or close to it,
and we need lots of testing of the new major changes.
I'm going to consider this a semi-stable testing release and leave links
to v103 just in case.
|
|
|
Tim Allen
|
406b6a61a5 |
Update to v103r31 release.
byuu says:
Changelog:
- gba/cpu: slight speedup to CPU::step()
- processor/arm7tdmi: fixed about ten bugs, ST018 and GBA games are
now playable once again
- processor/arm: removed core from codebase
- processor/v30mz: code cleanup (renamed functions; updated
instruction() for consistency with other cores)
It turns out on my much faster system, the new ARM7TDMI core is very
slightly slower than the old one (by about 2% or so FPS.) But the
CPU::step() improvement basically made it a wash.
So yeah, I'm in really serious trouble with how slow my GBA core is now.
Sigh.
As for higan/processor ... this concludes the first phase of major
cleanups and rewrites.
There will always be work to do, and I have two more phases in mind.
One is that a lot of the instruction disassemblers are very old. One
even uses sprintf still. I'd like to modernize them all. Also, the
ARM7TDMI core (and the ARM core before it) can't really disassemble
because the PC address used for instruction execution is not known prior
to calling instruction(), due to pipeline reload fetches that may occur
inside of said function. I had a nasty hack for debugging the new core,
but I'd like to come up with a clean way to allow tracing the new
ARM7TDMI core.
Another is that I'd still like to rename a lot of instruction function
names in various cores to be more descriptive. I really liked how the
LR35902 core came out there, and would like to get that level of detail
in with the other cores as well.
|
|
|
Tim Allen
|
1067566834 |
Update to v103r30 release.
byuu says: Changelog: - processor/arm7tdmi: completed implemented - gba/cpu, sfc/coprocessor/armdsp: use arm7tdmi instead of arm - sfc/cpu: experimental fix for newly discovered HDMA emulation issue Notes: The ARM7TDMI core crashes pretty quickly when trying to run GBA games, and I'm certain the same will be the case with the ST018. It was never all that likely I could rewrite 70KiB of code in 20 hours and have it work perfectly on the first try. So, now it's time for lots and lots of debugging. Any help would *really* be appreciated, if anyone were up for comparing the two implementations for regressions =^-^= I often have a really hard time spotting simple typos that I make. Also, the SNES HDMA fix is temporary. I would like it if testers could run through a bunch of games that are known for being tricky with HDMA (or if these aren't known to said tester, any games are fine then.) If we can confirm regressions, then we'll know the fix is either incorrect or incomplete. But if we don't find any, then it's a good sign that we're on the right path. |
|
|
Tim Allen
|
0b6f1df987 |
Update to v103r27 release.
byuu says:
Changelog:
- hiro/windows: set dpiAware=false, fixes icarus window sizes relative
to higan window sizes
- higan, icarus, hiro, ruby: add support for high resolution displays
on macOS [ncbncb]
- processor/lr35902-legacy: removed
- processor/arm7tdmi: new processor core started; intended to one day
be a replacement for processor/arm
It will probably take several WIPs to get the new ARM core up and
running. It's the last processor rewrite. After this, all processor
cores will be up to date with all my current programming conventions.
|
|
|
Tim Allen
|
191a71b291 |
Update to v103r08 release.
byuu says:
Changelog:
- emulator: improved aspect correction accuracy by using
floating-point calculations
- emulator: added videoCrop() function, extended videoSize() to take
cropping parameters¹
- tomoko: the overscan masking function will now actually resize the
viewport²
- gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs
when the CPU is stopped
- md/vdp: center video when overscan is disabled
- pce/vce: resize video output from 1140x240 to 1120x240
- tomoko: resize window scaling from 326x240 to 320x240
- tomoko: changed save slot naming and status bar messages to indicate
quick states vs managed states
- tomoko: added increment/decrement quick state hotkeys
- tomoko: save/load quick state hotkeys now save to slots 1-5 instead
of always to 0
- tomoko: increased overscan range from 0-16 to 0-24 (in case you want
to mask the Master System to 240x192)
¹: the idea here was to decouple raw pixels from overscan masking.
Overscan was actually horrifically broken before. The Famicom outputs at
256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480.
Before, a horizontal overscan mask of 8 would not reduce the Super
Famicom or Mega Drive by nearly as much as the Famicom. WIth the new
videoCrop() function, the internals of pixel size distortions can be
handled by each individual core.
²: furthermore, by taking optional cropping information in
videoSize(), games can scale even larger into the viewport window. So
for example, before the Super Famicom could only scale to 1536x1440. But
by cropping the vertical resolution by 6 (228p effectively, still more
than NTSC can even show), I can now scale to 1792x1596. And wiht aspect
correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me
perfectly crisp pixels without linear interpolation being required.
Errata: for some reason, when I save a new managed state with the SFC
core, the default description is being set to a string of what looks to
be hex numbers. I found the cause ... I'll fix this in the next release.
Note: I'd also like to hide the "find codes..." button if cheats.bml
isn't present, as well as update the SMP TEST register comment from
smp/timing.cpp
|
|
|
Tim Allen
|
d4876a831f |
Update to v103r07 release.
byuu says:
Changelog:
- gba/cpu: massive code cleanup effort
- gba/cpu: DMA can run in between active instructions¹
- gba/cpu: added two-cycle startup delay between DMA activation and
DMA transfers²
- processor/spc700: BBC, BBC, CBNE cycle 4 is an idle cycle
- processor/spc700: ADDW, SUBW, MOVW (read) cycle 4 is an idle cycle
¹: unfortunately, this causes yet another performance penalty for the
poor GBA core =( Also, I think I may have missed disabling DMAs while
the CPU is stopped. I'll fix that in the next WIP.
²: I put the waiting counter decrement at the wrong place, so this
doesn't actually work. Needs to be more like
this:
auto CPU::step(uint clocks) -> void {
for(auto _ : range(clocks)) {
for(auto& timer : this->timer) timer.run();
for(auto& dma : this->dma) if(dma.active && dma.waiting) dma.waiting--;
context.clock++;
}
...
auto CPU::DMA::run() -> bool {
if(cpu.stopped() || !active || waiting) return false;
transfer();
if(irq) cpu.irq.flag |= CPU::Interrupt::DMA0 << id;
if(drq && id == 3) cpu.irq.flag |= CPU::Interrupt::Cartridge;
return true;
}
Of course, the real fix will be restructuring how DMA works, so that
it's always running in parallel with the CPU instead of this weird
design where it tries to run all channels in some kind of loop until no
channels are active anymore whenever one channel is activated.
Not really sure how to design that yet, however.
|
|
|
Tim Allen
|
6e8406291c |
Update to v102r24 release.
byuu says
Changelog:
- FC: fixed three MOS6502 regressions [hex\_usr]
- GBA: return fetched instruction instead of 0 for unmapped MMIO
(passes all of endrift's I/O tests)
- MD: fix VDP control port read Vblank bit to test screen height
instead of hard-code 240 (fixes Phantasy Star IV)
- MD: swap USP,SSP when executing an exception (allows Super Street
Fighter II to run; but no sprites visible yet)
- MD: grant 68K access to Z80 bus on reset (fixes vdpdoc demo ROM from
freezing immediately)
- SFC: reads from $00-3f,80-bf:4000-43ff no longer update MDR
[p4plus2]
- SFC: massive, eight-hour cleanup of WDC65816 CPU core ... still not
complete
The big change this time around is the SFC CPU core. I've renamed
everything from R65816 to WDC65816, and then went through and tried to
clean up the code as much as possible. This core is so much larger than
the 6502 core that I chose cleaning up the code to rewriting it.
First off, I really don't care for the BitRange style functionality. It
was an interesting experiment, but its fatal flaw are that the types are
just bizarre, which makes them hard to pass around generically to other
functions as arguments. So I went back to the list of bools for flags,
and union/struct blocks for the registers.
Next, I renamed all of the functions to be more descriptive: eg
`op_read_idpx_w` becomes `instructionIndexedIndirectRead16`. `op_adc_b`
becomes `algorithmADC8`. And so forth.
I eliminated about ten instructions because they were functionally
identical sans the index, so I just added a uint index=0 parameter to
said functions. I added a few new ones (adjust→INC,DEC;
pflag→REP,SEP) where it seemed appropriate.
I cleaned up the disaster of the instruction switch table into something
a whole lot more elegant without all the weird argument decoding
nonsense (still need M vs X variants to avoid having to have 4-5
separate switch tables, but all the F/I flags are gone now); and made
some things saner, like the flag clear/set and branch conditions, now
that I have normal types for flags and registers once again.
I renamed all of the memory access functions to be more descriptive to
what they're doing: eg writeSP→push, readPC→fetch,
writeDP→writeDirect, etc. Eliminated some of the special read/write
modes that were only used in one single instruction.
I started to clean up some of the actual instructions themselves, but
haven't really accomplished much here. The big thing I want to do is get
rid of the global state (aa, rd, iaddr, etc) and instead use local
variables like I am doing with my other 65xx CPU cores now. But this
will take some time ... the algorithm functions depend on rd to be set
to work on them, rather than taking arguments. So I'll need to rework
that.
And then lastly, the disassembler is still a mess. I want to finish the
CPU cleanups, and then post a new WIP, and then rewrite the disassembler
after that. The reason being ... I want a WIP that can generate
identical trace logs to older versions, in case the CPU cleanup causes
any regressions. That way I can more easily spot the errors.
Oh ... and a bit of good news. v102 was running at ~140fps on the SNES
core. With the new support to suspend/resume WAI/STP, plus the internal
CPU registers not updating the MDR, the framerate dropped to ~132fps.
But with the CPU cleanups, performance went back to ~140fps. So, hooray.
Of course, without those two other improvements, we'd have ended up at
possibly ~146-148fps, but oh well.
|
|
|
Tim Allen
|
8af3e4a6e2 |
Update to v102r22 release.
byuu says:
Changelog:
- higan: Emulator::Interface::videoSize() renamed to videoResolution()
- higan: Emulator::Interface::rtcsync() renamed to rtcSynchronize()
- higan: added video display rotation support to Video
- GBA: substantially improved audio mixing
- fixed bug with FIFO 50%/100% volume setting
- now properly using SOUNDBIAS amplitude to control output
frequencies
- reduced quantization noise
- corrected relative volumes between PSG and FIFO channels
- both PSG and FIFO values cached based on amplitude; resulting in
cleaner PCM samples
- treating PSG volume=3 as 200% volume instead of 0% volume now
(unverified: to match mGBA)
- GBA: properly initialize ALL CPU state; including the vital
prefetch.wait=1 (fixes Classic NES series games)
- GBA: added video rotation with automatic key translation support
- PCE: reduced output resolution scalar from 285x242 to 285x240
- the extra two scanlines won't be visible on most TVs; and they
make all other cores look worse
- this is because all other cores output at 240p or less; so they
were all receiving black bars in windowed mode
- tomoko: added "Rotate Display" hotkey setting
- tomoko: changed hotkey multi-key logic to OR instead of AND
- left support for flipping it back inside the core; for those so
inclined; by uncommenting one line in input.hpp
- tomoko: when choosing Settings→Configuration, it will
automatically select the currently loaded system
- for instance, if you're playing a Game Gear game, it'll take you
to the Game Gear input settings
- if no games are loaded, it will take you to the hotkeys panel
instead
- WS(C): merged "Hardware-Vertical", "Hardware-Horizontal" controls
into combined "Hardware"
- WS(C): converted rotation support from being inside the core to
using Emulator::Video
- this lets WS(C) video content scale larger now that it's not
bounded by a 224x224 square box
- WS(C): added automatic key rotation support
- WS(C): removed emulator "Rotate" key (use the general hotkey
instead; I recommend F8 for this)
- nall: added serializer support for nall::Boolean (boolean) types
- although I will probably prefer the usage of uint1 in most cases
|
|
|
Tim Allen
|
3bcf3c24c9 |
Update to v102r20 release.
byuu says:
Changelog:
- nall: `#undef OUT` on Windows platform
- GBA: add missing CPU prefetch state to serialization (this was
breaking serialization in games using ROM prefetch)
- GBA: reset all PPU data in the power() function (some things were
missing before, causing issues on reset)
- GBA: restored horizontal mosaic emulation to the new pixel-based
renderer
- GBA: fixed tilemap background horizontal flipping (Legend of Spyro -
warning screen)
- GBA: fixed d8 bits of scroll registers (ATV - Thunder Ridge Racers -
menu screen)
- SFC: DRAM refresh ticks the ALU MUL/DIV registers five steps forward
[reported by kevtris]
- SFC: merged dmaCounter and autoJoypadCounter into new shared
clockCounter
- left stub for old dmaCounter so that I can do some traces to
ensure the new code's 100% identical
GBA save states would have been broken since whenever I emulated ROM
prefetch. I guess not many people are using the GBA core ...
|
|
|
Tim Allen
|
bf90bdfcc8 |
Update to v101r31 release.
byuu says:
Changelog:
- converted Emulator::Interface::Bind to Emulator::Platform
- temporarily disabled SGB hooks
- SMS: emulated Game Gear palette (latching word-write behavior not
implemented yet)
- SMS: emulated Master System 'Reset' button, Game Gear 'Start' button
- SMS: removed reset() functionality, driven by the mappable input now
instead
- SMS: split interface class in two: one for Master System, one for
Game Gear
- SMS: emulated Game Gear video cropping to 160x144
- PCE: started on HuC6280 CPU core—so far only registers, NOP
instruction has been implemented
Errata:
- Super Game Boy support is broken and thus disabled
- if you switch between Master System and Game Gear without
restarting, bad things happen:
- SMS→GG, no video output on the GG
- GG→SMS, no input on the SMS
I'm not sure what's causing the SMS\<-\>GG switch bug, having a hard
time debugging it. Help would be very much appreciated, if anyone's up
for it. Otherwise I'll keep trying to track it down on my end.
|
|
|
Tim Allen
|
e30780bb72 |
Update to v101r25 release.
byuu says:
Changelog:
- Makefile: added $(windres), -lpthread to Windows port
- GBA: WAITCNT.prefetch is not writable (should fix Donkey Kong: King
of Swing) \[endrift\]
- SMS: fixed hcounter shift value \[hex\_usr\]
- SMS: emulated interrupts (reset button isn't hooked up anywhere, not
sure where to put it yet)
This WIP actually took a really long time because the documentation on
SMS interrupts was all over the place. I'm hoping I've emulated them
correctly, but I honestly have no idea. It's based off my best
understanding from four or five different sources. So it's probably
quite buggy.
However, a few interrupts fire in Sonic the Hedgehog, so that's
something to start with. Now I just have to hope I've gotten some games
far enough in that I can start seeing some data in the VDP VRAM. I need
that before I can start emulating graphics mode 4 to get some actual
screen output.
Or I can just say to hell with it and use a "Hello World" test ROM.
That'd probably be smarter.
|
|
|
Tim Allen
|
ca277cd5e8 |
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
|
|
|
Tim Allen
|
67457fade4 |
Update to v099r13 release.
byuu says: Changelog: - GB core code cleanup completed - GBA core code cleanup completed - some more cleanup on missed processor/arm functions/variables - fixed FC loading icarus bug - "Load ROM File" icarus functionality restored - minor code unification efforts all around (not perfect yet) - MMIO->IO - mmio.cpp->io.cpp - read,write->readIO,writeIO It's been a very long work in progress ... starting all the way back with v094r09, but the major part of the higan code cleanup is now completed! Of course, it's very important to note that this is only for the basic style: - under_score functions and variables are now camelCase - return-type function-name() are now auto function-name() -> return-type - Natural<T>/Integer<T> replace (u)intT_n types where possible - signed/unsigned are now int/uint - most of the x==true,x==false tests changed to x,!x A lot of spot improvements to consistency, simplicity and quality have gone in along the way, of course. But we'll probably never fully finishing beautifying every last line of code in the entire codebase. Still, this is a really great start. Going forward, WIP diffs should start being smaller and of higher quality once again. I know the joke is, "until my coding style changes again", but ... this was way too stressful, way too time consuming, and way too risky. I'm too old and tired now for extreme upheavel like this again. The only major change I'm slowly mulling over would be renaming the using Natural<T>/Integer<T> = (u)intT; shorthand to something that isn't as easily confused with the (u)int_t types ... but we'll see. I'll definitely continue to change small things all the time, but for the larger picture, I need to just accept the style I have and live with it. |
|
|
Tim Allen
|
ae5d380d06 |
Update to v098r11 release.
byuu says:
Changelog:
- fixed nall/path.hpp compilation issue
- fixed ruby/audio/xaudio header declaration compilation issue (again)
- cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the
file was whitespace overkill)
- added null terminator entry to nall/windows/utf8.hpp argc[] array
- nall/windows/guid.hpp uses the Windows API for generating the GUID
- this should stop all the bug reports where two nall users were
generating GUIDs at the exact same second
- fixed hiro/cocoa compilation issue with uint# types
- fixed major higan/sfc Super Game Boy audio latency issue
- fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions
- major cleanups to higan/processor/r65816 core
- merged emulation/native-mode opcodes
- use camel-case naming on memory.hpp functions
- simplify address masking code for memory.hpp functions
- simplify a few opcodes themselves (avoid redundant copies, etc)
- rename regs.* to r.* to match modern convention of other CPU cores
- removed device.order<> concept from Emulator::Interface
- cores will now do the translation to make the job of the UI easier
- fixed plurality naming of arrays in Emulator::Interface
- example: emulator.ports[p].devices[d].inputs[i]
- example: vector<Medium> media
- probably more surprises
Major show-stoppers to the next official release:
- we need to work on GB core improvements: LY=153/0 case, multiple STAT
IRQs case, GBC audio output regs, etc.
- we need to re-add software cursors for light guns (Super Scope,
Justifier)
- after the above, we need to fix the turbo button for the Super Scope
I really have no idea how I want to implement the light guns. Ideally,
we'd want it in higan/video, so we can support the NES Zapper with the
same code. But this isn't going to be easy, because only the SNES knows
when its output is interlaced, and its resolutions can vary as
{256,512}x{224,240,448,480} which requires pixel doubling that was
hard-coded to the SNES-specific behavior, but isn't appropriate to be
exposed in higan/video.
|
|
|
Tim Allen
|
e2ee6689a0 |
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
|
|
|
Tim Allen
|
29be18ce0c |
Update to v097r17 release.
byuu says:
Changelog:
- ruby: if DirectSoundCreate fails (no sound device present), return
false from init instead of crashing
- nall: improved edge case return values for
(basename,pathname,dirname,...)
- nall: renamed file_system_object class to inode
- nall: varuint_t replaced with VariadicNatural; which contains
.bit,.bits,.byte ala Natural/Integer
- nall: fixed boolean compilation error on Windows
- WS: popa should not restore SP
- GBA: rewrote the CPU/APU cores to use the .bit,.bits functions;
removed registers.cpp from each
Note that the GBA changes are extremely major. This is about five hours
worth of extremely delicate work. Any slight errors could break
emulation in extremely bad ways. Let's hold off on extensive testing
until the next WIP, after I do the same to the PPU.
So far ... endrift's SOUNDCNT_X I/O test is failing, although that code
didn't change, so clearly I messed up SOUNDCNT_H somehow ...
To compile on Windows:
1. change nall/string/platform.hpp line 47 to
return slice(result, 0, 3);
2. change ruby/video.wgl.cpp line 72 to
auto lock(uint32_t*& data, uint& pitch, uint width, uint height) -> bool {
3. add this line to the very top of hiro/windows/header.cpp:
#define boolean FuckYouMicrosoft
|
|
|
Tim Allen
|
4b29f4bad7 |
Update to v097r15 release.
byuu says: Changelog: - higan now uses Natural<Size>/Integer<Size> for its internal types - Super Famicom emulation now uses uint24 instead of uint for bus addresses (it's a 24-bit bus) - cleaned up gb/apu MMIO writes - cleaned up sfc/coprocessor/msu1 MMIO writes - ~3% speed penalty I've wanted to do that 24-bit bus thing for so long, but have always been afraid of the speed impact. It's probably going to hurt balanced/performance once they compile again, but it wasn't significant enough to harm the accuracy core's frame rate, thankfully. Only lost one frame per second. The GBA core handlers are clearly going to take a lot more work. The bit-ranges will make it substantially easier to handle, though. Lots of 32-bit registers where certain values span multiple bytes, but we have to be able to read/write at byte-granularity. |
|
|
Tim Allen
|
ef65bb862a |
Update to 20160215 release.
byuu says: Got it. Wow, that didn't hurt nearly as much as I thought it was going to. Dropped from 127.5fps to 123.5fps to use Natural/Integer for (u)int(8,16,32,64). That's totally worth the cost. |
|
|
Tim Allen
|
6c83329cae |
Update to v097r13 release.
byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database. |
|
|
Tim Allen
|
47d4bd4d81 |
Update to v096r01 release.
byuu says: Changelog: - restructured the project and removed a whole bunch of old/dead directives from higan/GNUmakefile - huge amounts of work on hiro/cocoa (compiles but ~70% of the functionality is commented out) - fixed a masking error in my ARM CPU disassembler [Lioncash] - SFC: decided to change board cic=(411,413) back to board region=(ntsc,pal) ... the former was too obtuse If you rename Boolean (it's a problem with an include from ruby, not from hiro) and disable all the ruby drivers, you can compile an OS X binary, but obviously it's not going to do anything. It's a boring WIP, I just wanted to push out the project structure change now at the start of this WIP cycle. |
|
|
Tim Allen
|
4e2eb23835 |
Update to v093 release.
byuu says: Changelog: - added Cocoa target: higan can now be compiled for OS X Lion [Cydrak, byuu] - SNES/accuracy profile hires color blending improvements - fixes Marvelous text [AWJ] - fixed a slight bug in SNES/SA-1 VBR support caused by a typo - added support for multi-pass shaders that can load external textures (requires OpenGL 3.2+) - added game library path (used by ananke->Import Game) to Settings->Advanced - system profiles, shaders and cheats database can be stored in "all users" shared folders now (eg /usr/share on Linux) - all configuration files are in BML format now, instead of XML (much easier to read and edit this way) - main window supports drag-and-drop of game folders (but not game files / ZIP archives) - audio buffer clears when entering a modal loop on Windows (prevents audio repetition with DirectSound driver) - a substantial amount of code clean-up (probably the biggest refactoring to date) One highly desired target for this release was to default to the optimal drivers instead of the safest drivers, but because AMD drivers don't seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD has too big a market share. Hopefully with v093 officially released, we can get some public input on what AMD doesn't like. |
|
|
Tim Allen
|
29ea5bd599 |
Update to v092r09 release.
byuu says:
This will be another massive diff from the previous version.
All of higan was updated to use the new foo& bar syntax, and I also
updated switch statements to be consistent as well (but not in the
disassemblers, was starting to get an RSI just from what I already did.)
phoenix/{windows, cocoa, qt} need to be updated to use "string foo"
instead of "const string& foo", and after that, the major diffs should
be finished.
This archive is the first time I'm posting my copy-on-write,
size+capacity nall::string class, so any feedback on that is welcome as
well.
|
|
|
Tim Allen
|
94b2538af5 |
Update to higan v091 release.
byuu says: Basically just a project rename, with s/bsnes/higan and the new icon from lowkee added in. It won't compile on Windows because I forgot to update the resource.rc file, and a path transform command isn't working on Windows. It was really just meant as a starting point, so that v091 WIPs can flow starting from .00 with the new name (it overshadows bsnes v091, so publicly speaking this "shouldn't exist" and will probably be deleted from Google Code when v092 is ready.) |