mirror of https://github.com/bsnes-emu/bsnes.git
29 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
8476f35153 |
Update to v102r28 release.
byuu says:
Changelog:
- higan: `Emulator::<Platform::load>()` now returns a struct containing
both a path ID and a string option
- higan: `Emulator::<Platform::load>()` now takes an optional final
argument of string options
- fc: added PAL emulation (finally, only took six years)
- md: added PAL emulation
- md: fixed address parameter to `VDP::Sprite::write()`; fixes missing
sprites in Super Street Fighter II
- md: emulated HIRQ counter; fixes many games
- Super Street Fighter II - status bar
- Altered Beast - status bar
- Sonic the Hedgehog - Labyrinth Zone - water effect
- etc.
- ms: added PAL emulation
- sfc: added the ability to override the default region auto-detection
- sfc: removed "system.region" override setting from `Super Famicom.sys`
- tomoko: added options list to game folder load dialog window
- tomoko: added the ability to specify game folder load options on the
command-line
So, basically ... Sega forced a change with the way region detection
works. You end up with games that can run on multiple regions, and the
content changes accordingly. Bare Knuckle in NTSC-J mode will become
Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and
PAL mode.
In my view, there should be a separate ROM for each region a game was
released in, even if the ROM content were identical. But unfortunately
that's not how things were done by anyone else.
So to support this, the higan load dialog now has a drop-down at the
bottom-right, where you can choose the region to load games from. On the
SNES, it defaults to "Auto", which will pull the region setting from the
manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I
can't auto-detect the region from the ROM header. $1f0 is supposed to
contain a string like "JUE", but instead you get games like Maui Mallard
that put an "A" there, and other such nonsense. Sega was far more lax
than Nintendo with the ROM header validity. So for now at least, you
have to manually select your region every time you play a Mega Drive
game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the
Master System for the same reason, but there's only "NTSC" and "PAL"
here. I'm not sure if games have a way to detect domestic vs
international consoles.
And for now ... the Famicom is the same as well, with no auto-detection.
I'd sincerely hope iNES has a header bit for the region, but I didn't
bother with updating icarus to support that yet.
The way to pass these parameters on the command-line is to prefix the
game path with "option:", so for example:
higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md"
If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or
Auto.) Obviously, it's not possible to pass parameters with
drag-and-drop, so you will always get the default option in said case.
|
|
|
Tim Allen
|
bdc100e123 |
Update to v102r02 release.
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
|
|
|
Tim Allen
|
bf90bdfcc8 |
Update to v101r31 release.
byuu says:
Changelog:
- converted Emulator::Interface::Bind to Emulator::Platform
- temporarily disabled SGB hooks
- SMS: emulated Game Gear palette (latching word-write behavior not
implemented yet)
- SMS: emulated Master System 'Reset' button, Game Gear 'Start' button
- SMS: removed reset() functionality, driven by the mappable input now
instead
- SMS: split interface class in two: one for Master System, one for
Game Gear
- SMS: emulated Game Gear video cropping to 160x144
- PCE: started on HuC6280 CPU core—so far only registers, NOP
instruction has been implemented
Errata:
- Super Game Boy support is broken and thus disabled
- if you switch between Master System and Game Gear without
restarting, bad things happen:
- SMS→GG, no video output on the GG
- GG→SMS, no input on the SMS
I'm not sure what's causing the SMS\<-\>GG switch bug, having a hard
time debugging it. Help would be very much appreciated, if anyone's up
for it. Otherwise I'll keep trying to track it down on my end.
|
|
|
Tim Allen
|
f3e67da937 |
Update to v101r19 release.
byuu says:
Changelog:
- added \~130 new PAL games to icarus (courtesy of Smarthuman
and aquaman)
- added all three Korean-localized games to icarus
- sfc: removed SuperDisc emulation (it was going nowhere)
- sfc: fixed MSU1 regression where the play/repeat flags were not
being cleared on track select
- nall: cryptography support added; will be used to sign future
databases (validation will always be optional)
- minor shims to fix compilation issues due to nall changes
The real magic is that we now have 25-30% of the PAL SNES library in
icarus!
Signing will be tricky. Obviously if I put the public key inside the
higan archive, then all anyone has to do is change that public key for
their own releases. And if you download from my site (which is now over
HTTPS), then you don't need the signing to verify integrity. I may just
put the public key on my site on my site and leave it at that, we'll
see.
|
|
|
Tim Allen
|
ca277cd5e8 |
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
|
|
|
Tim Allen
|
76a8ecd32a |
Update to v100r03 release.
byuu says: Changelog: - moved Thread, Scheduler, Cheat functionality into emulator/ for all cores - start of actual Mega Drive emulation (two 68K instructions) I'm going to be rather terse on MD emulation, as it's too early for any meaningful dialogue here. |
|
|
Tim Allen
|
67457fade4 |
Update to v099r13 release.
byuu says: Changelog: - GB core code cleanup completed - GBA core code cleanup completed - some more cleanup on missed processor/arm functions/variables - fixed FC loading icarus bug - "Load ROM File" icarus functionality restored - minor code unification efforts all around (not perfect yet) - MMIO->IO - mmio.cpp->io.cpp - read,write->readIO,writeIO It's been a very long work in progress ... starting all the way back with v094r09, but the major part of the higan code cleanup is now completed! Of course, it's very important to note that this is only for the basic style: - under_score functions and variables are now camelCase - return-type function-name() are now auto function-name() -> return-type - Natural<T>/Integer<T> replace (u)intT_n types where possible - signed/unsigned are now int/uint - most of the x==true,x==false tests changed to x,!x A lot of spot improvements to consistency, simplicity and quality have gone in along the way, of course. But we'll probably never fully finishing beautifying every last line of code in the entire codebase. Still, this is a really great start. Going forward, WIP diffs should start being smaller and of higher quality once again. I know the joke is, "until my coding style changes again", but ... this was way too stressful, way too time consuming, and way too risky. I'm too old and tired now for extreme upheavel like this again. The only major change I'm slowly mulling over would be renaming the using Natural<T>/Integer<T> = (u)intT; shorthand to something that isn't as easily confused with the (u)int_t types ... but we'll see. I'll definitely continue to change small things all the time, but for the larger picture, I need to just accept the style I have and live with it. |
|
|
Tim Allen
|
7a68059f78 |
Update to v099r12 release.
byuu says: Changelog: - fixed FC AxROM / VRC7 regression - BitField split to BooleanBitField/NaturalBitField (in preparation for IntegerBitField) - BitFieldReference removed - GB CPU cleaned up - GB Cartridge + Mappers cleaned up - SFC CGRAM is now emulated as uint15[256] instead of uint[512] - sfc/ppu/memory.cpp no longer needed; removed - purged SFC Debugger hooks for now (some of the operator[] calls were bypassing them anyway) Unfortunately, for reasons that defy all semblance of logic, the CGRAM change caused a slight speed hit. As have the last few changes. We're now down to around 129.5fps compared to 123.fps for v099 and 134.5fps at our peak (v099r01-r02). I really like the style I came up with for the Game Boy mappers to settle the purpose(ROM,RAM) vs (rom,ram)Purpose naming convention. If I ever get around to redoing the NES mappers, that's likely the approach I'll take. |
|
|
Tim Allen
|
3e807946b8 |
Update to v099r11 release.
byuu says: Changelog: - NES PPU core updated to use BitFields (absolutely massive improvement in code readability) - NES APU core updated to new coding style - NES cartridge/board and cartridge/chip updated to new coding style - pushed NES PPU rendering one dot forward (doesn't fix King's Quest V yet, sadly) - fixed SNES PPU BG tilemask for 128KiB VRAM mode (doesn't fix Yoshi's Island, though) So ... I kind of went overboard with the fc/cartridge changes. This WIP diff is 185KiB >_> I didn't realize it was going to be as big a task as it was, but once I started everything broke in a chain reaction, so I had to do it all at once. There's a massive chance we've broken a bunch of NES things. Any typos in this WIP are going to be absolutely insidious to track down =( But ... supposing I pulled it off, this means the Famicom core is now fully converted to the new coding style as well. That leaves only the GB and GBA cores. Once those are finished, then we'll finally be free of these gigantic hellspawn diffs. |
|
|
Tim Allen
|
a816998122 |
Update to v099r10 release.
byuu says:
Changelog:
- higan/profile/ => higan/systems/ [temporary; unless we can't think of
a better base folder name]
- god-damn-better-have fixed the input polling bug
- re-added command-line and drag-and-drop loading
- command-line loading can now load multiple folders at once (SGB+GB
game; Sufami Turbo+Slot A+Slot B; etc)
- if you load just the base cart, it'll present you with a dialog to
optionally load slotted cart(s)
- MSU1 now goes through nall/vfs instead of directly accessing the
filesystem
- Famicom Cartridge, PPU cores updated to newer programming style
- there's countless opportunity for BitField and .bits() in the PPU
... but I'm worried about breaking things
If anyone has a working MSU1 game and can test the changes out, that'd
be appreciated. I still don't have a test ROM on my dev box.
I wouldn't worry too much about extensively testing the Famicom PPU
changes just yet ... I'm still struggling with what to name the structs
inside the classes between all of my emulators, and the BitField/.bits()
changes will be much more important to test at a later date.
The only use case left for Emulator::Interface::path(uint id) is for
21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen,
which do not have any official ways to open a file in RAM. I'm
very hesitant to use the portable trick of writing the memory to a
temporary file, loading it, and deleting the temporary file once done
... it's a real waste of disk activity. I might make something like
vfs::file::isVirtual->bool,path()->string to get around this. But even
once I do, the underlying LoadLibrary/dlopen call is still going to be
direct disk access.
|
|
|
Tim Allen
|
3a9c7c6843 |
Update to v099r09 release.
byuu says:
Changelog:
- Emulator::Interface::Medium::bootable removed
- Emulator::Interface::load(bool required) argument removed
[File::Required makes no sense on a folder]
- Super Famicom.sys now has user-configurable properties (CPU,PPU1,PPU2
version; PPU1 VRAM size, Region override)
- old nall/property removed completely
- volatile flags supported on coprocessor RAM files now (still not in
icarus, though)
- (hopefully) fixed SNES Multitap support (needs testing)
- fixed an OAM tiledata range clipping limit in 128KiB VRAM mode (doesn't
fix Yoshi's Island, sadly)
- (hopefully, again) fixed the input polling bug hex_usr reported
- re-added dialog box for when File::Required files are missing
- really cool: if you're missing a boot ROM, BIOS ROM, or IPL ROM,
it warns you immediately
- you don't have to select a game before seeing the error message
anymore
- fixed cheats.bml load/save location
|
|
|
Tim Allen
|
f48b332c83 |
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
|
|
|
Tim Allen
|
ccd8878d75 |
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
|
|
|
Tim Allen
|
875f031182 |
Update to v099r06 release.
byuu says: Changelog: - Super Famicom core converted to use nall/vfs - excludes Super Game Boy; since that's invoked from inside the GB core This was definitely the major obstacle to test nall/vfs' applicability. Things worked out pretty great in the end. We went from 22.0KiB (cartridge) + 18.6KiB (interface) to 24.5KiB (cartridge) + 11.4KiB (interface). Or 40.7KiB to 36.0KiB. This removes a very large source of indirection. Before it was: "coprocessor <=> cartridge <=> interface" for loading and saving data, and now it's just "coprocessor <=> cartridge". And it may make sense to eventually turn this into just "cartridge -> coprocessor" by making each coprocessor class handle its own markup parsing. It's nice to have all the manifest parsing in one location (well, sans MSU1); but it's also nice for loading/unloading to be handled by each coprocessor itself. So I'll have to think longer about that one. I've also started handling Interface::save() differently. Instead of keeping track of memory IDs and filenames, and iterating through that vector of objects ... instead I now have a system that mirrors the markup parsing on loading, but handles saving instead. This was actually the reason the code size savings weren't more significant, but I like this style more. As before, it removes an extra level of indirection. So ... next up, I need to port over the GB, then GBA, then WS cores. These shouldn't take too long since they're all very simple with just ROM+RAM(+RTC) right now. Then get the SGB callbacks using vfs. Then after that, gut all the old stream stuff from nall and higan. Kill the (load,save)Request stuff, rename the load(Gamepak)Request to something simpler, and then we should be good. Anyway ... these are some huge changes. |
|
|
Tim Allen
|
f04d9d58f5 |
Update to v099r05 release.
byuu says: Changelog: - added nall/vfs - converted Famicom core to use nall/vfs interface instead of nall/stream interface |
|
|
Tim Allen
|
40abcfc4a5 |
Update to v099r04 release.
byuu says: Changelog: - lots of code cleanups to processor/r6502 (the switch.cpp file is only halfway done ...) - lots of code cleanups to fc/cpu - removed fc/input - implemented fc/controller hex_usr, you may not like this, but I want to keep the controller port and expansion port interface separate, like I do with the SNES. I realize the NES' is used more for controllers, and the SNES' more for hardware expansions, but ... they're not compatible pinouts and you can't really connect one to the other. Right now, I've only implemented the controller portion. I'll have to get to the peripheral portion later. Also, the gamepad implementation there now may be wrong. It's based off the Super Famicom version obviously. I'm not sure if the Famicom has different behavior with latching $4016 writes, or not. But, it works in Mega Man II, so it's a start. Everyone, be sure to remap your controls, and then set port 1 -> gamepad after loading your first Famicom game with the new WIP. |
|
|
Tim Allen
|
ef65bb862a |
Update to 20160215 release.
byuu says: Got it. Wow, that didn't hurt nearly as much as I thought it was going to. Dropped from 127.5fps to 123.5fps to use Natural/Integer for (u)int(8,16,32,64). That's totally worth the cost. |
|
|
Tim Allen
|
6c83329cae |
Update to v097r13 release.
byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database. |
|
|
Tim Allen
|
32a95a9761 |
Update to v097r12 release.
byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now. |
|
|
Tim Allen
|
82ec876302 |
Update to v096r05 release.
byuu says: Changelog: - GB: re-enabling the LCD resets the display to LY=0,LX=0 [1] - GB: emulated new findings (as of today!) for a DMG quirk that triggers an extra OAM STAT IRQ when Vblank STAT IRQs are off - GB: made VBK, BGPI, OBPI readable - GB: fixed APU length operations - GB: fixed APU sweep operations - NES: fixed cartridge/ -> board/ manifest lookups for mirroring/pinous - hiro/Cocoa: added endrift's plist keys Fixed: - Astro Rabby is fully playable, even the title screen works correctly - Bomb Jack is fully playable - Kirby's Dream Land 2 intro scrolling first scanline of Rick is now fixed - GBVideoPlayer functions correctly [2] - Shin Megami Tensei: Devichil series regression fixed [1] doesn't pass oam_bug-2/1-lcd_sync; because it seems to want LY=0,LX>0, and I can't step the PPU in a register write as it's not a state machine; the effect is emulated, it just starts the frame a tiny bit sooner. blargg's testing is brutal, you can't be even one cycle off or the test will fail. [2] note that you will need the GBC Display Emulation shader from hunterk's repository, or it will look like absolute shit. The inter-frame blending is absolutely critical here. |
|
|
Tim Allen
|
47d4bd4d81 |
Update to v096r01 release.
byuu says: Changelog: - restructured the project and removed a whole bunch of old/dead directives from higan/GNUmakefile - huge amounts of work on hiro/cocoa (compiles but ~70% of the functionality is commented out) - fixed a masking error in my ARM CPU disassembler [Lioncash] - SFC: decided to change board cic=(411,413) back to board region=(ntsc,pal) ... the former was too obtuse If you rename Boolean (it's a problem with an include from ruby, not from hiro) and disable all the ruby drivers, you can compile an OS X binary, but obviously it's not going to do anything. It's a boring WIP, I just wanted to push out the project structure change now at the start of this WIP cycle. |
|
|
Tim Allen
|
4e2eb23835 |
Update to v093 release.
byuu says: Changelog: - added Cocoa target: higan can now be compiled for OS X Lion [Cydrak, byuu] - SNES/accuracy profile hires color blending improvements - fixes Marvelous text [AWJ] - fixed a slight bug in SNES/SA-1 VBR support caused by a typo - added support for multi-pass shaders that can load external textures (requires OpenGL 3.2+) - added game library path (used by ananke->Import Game) to Settings->Advanced - system profiles, shaders and cheats database can be stored in "all users" shared folders now (eg /usr/share on Linux) - all configuration files are in BML format now, instead of XML (much easier to read and edit this way) - main window supports drag-and-drop of game folders (but not game files / ZIP archives) - audio buffer clears when entering a modal loop on Windows (prevents audio repetition with DirectSound driver) - a substantial amount of code clean-up (probably the biggest refactoring to date) One highly desired target for this release was to default to the optimal drivers instead of the safest drivers, but because AMD drivers don't seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD has too big a market share. Hopefully with v093 officially released, we can get some public input on what AMD doesn't like. |
|
|
Tim Allen
|
29ea5bd599 |
Update to v092r09 release.
byuu says:
This will be another massive diff from the previous version.
All of higan was updated to use the new foo& bar syntax, and I also
updated switch statements to be consistent as well (but not in the
disassemblers, was starting to get an RSI just from what I already did.)
phoenix/{windows, cocoa, qt} need to be updated to use "string foo"
instead of "const string& foo", and after that, the major diffs should
be finished.
This archive is the first time I'm posting my copy-on-write,
size+capacity nall::string class, so any feedback on that is welcome as
well.
|
|
|
Tim Allen
|
bbc33fe05f |
Update to higan v092r01, ananke v02r01 and purify v03r01 releases.
byuu says: higan changelog: - compiler is set to g++-4.7, subst(cc,++) rule is gone, C files compile with $(compiler) -x c - make throws an error when you specify an invalid profile or compile on an unsupported platform (instead of hanging forever) - added unverified.png to resources (causes too big of a speed hit to actually check for folder/unverified file ... so disabled for now) - fixed default browser paths for Game Boy, Sufami Turbo and BS-X Satellaview (have to delete paths.cfg to see this) - browser home button seeks to configpath()/higan/library.cfg - settings->driver is now settings->advanced, and it adds game library path setting and profile information - emulation cores now load manifest files internally, manifest.bml is not required for a game folder to be recognized by higan as such - BS-X Satellaview and Sufami Turbo slot cartridge handling moved out of sfc/chip and into sfc/slot - Video::StartFullScreen only sets fullscreen when a game is specified on the command-line purify and ananke changelog: - library output path shown in purify window - added button to change library path - squelch firmware warning windows to prevent multi-threading crash, but only via purify (they show up in higan still) |
|
|
Tim Allen
|
032e924495 |
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
|
|
|
Tim Allen
|
d59ae34e12 |
Update to higan v091r14 and ananke v00r03 releases.
byuu says:
higan changelog:
- generates title displayed in emulator window by asking the core
- core builds title solely from "information/title" ... if it's not
there, you don't get a title at all
- sub-system load menu is gone ... since there are multiple revisions of
the SGB, this never really worked well anyway
- to load an SGB, BS-X or ST cartridge, load the base cartridge first
- "File->Load Game" moved to "Load->Import Game" ... may cause a bit of
confusion to new users, but I don't like having a single-item menu,
we'll just have to explain it to new users
- browser window redone to look like ananke
- home button here goes to ~/Emulation rather than just ~ like ananke,
since this is the home of game folders
- game folder icon is now the executable icon for the Tango theme
(orange diamond), meant to represent a complete game rather than
a game file or archive
ananke changelog:
- outputs GBC games to "Game Boy Color/" instead of "Game Boy/"
- adds the file basename to "information/title"
Known issues:
- using ananke to load a GB game trips the Super Famicom SGB mode and
fails (need to make the full-path auto-detection ignore non-bootable
systems)
- need to dump and test some BS-X media before releasing
- ananke lacks BS-X Satellaview cartridge support
- v092 isn't going to let you retarget the ananke/higan game folder path
of ~/Emulation, you will have to wait for a future version if that
bothers you so greatly
[Later, after the v092 release, byuu posted this additional changelog:
- kill laevateinn
- add title()
- add bootable, remove load
- combine file, library
- combine [][][] paths
- fix SFC subtype handling XML->BML
- update file browser to use buttons
- update file browser keyboard handling
- update system XML->BML
- fix sufami turbo hashing
- remove Cartridge::manifest
]
|
|
|
Tim Allen
|
ab345ff20c |
Update to v091r09 release.
[r07 and r08 were not posted to the WIP thread. -Ed.]
byuu says:
I'd appreciate it if you guys wouldn't mind testing out the database
functionality.
Save this file as database.bml (remove the date) inside
~/.config/higan/Super Famicom.sfc/ or %APPDATA%/higan/Super Famicom.sfc/
http://byuu.org/snes/database/database_2012-10-21.bml
Now load any of the 20 games in the database from the file dialog. They
need to be named *.sfc, have no copier header, and have firmware
appended (for Mario Kart only so far.)
If anyone actually does test it, please let me know how it goes for you
and what you think. Note that future versions of higan will have the
database.bml file included with the release.
|
|
|
Tim Allen
|
ef746bbda4 |
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
|
|
|
Tim Allen
|
94b2538af5 |
Update to higan v091 release.
byuu says: Basically just a project rename, with s/bsnes/higan and the new icon from lowkee added in. It won't compile on Windows because I forgot to update the resource.rc file, and a path transform command isn't working on Windows. It was really just meant as a starting point, so that v091 WIPs can flow starting from .00 with the new name (it overshadows bsnes v091, so publicly speaking this "shouldn't exist" and will probably be deleted from Google Code when v092 is ready.) |