byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
byuu says:
Changelog:
- bsnes, higan: simplified make output; reordered rules
- hiro: added Window::set(Minimum,Maximum)Size() [only implemented in
GTK+ so far]
- bsnes: only allow the window to be shrunk to the 1x multiplier size
- bsnes: refactored Integral Scaling checkbox to {Center, Scale,
Stretch} radio selection
- nall: call fflush() after nall::print() to stdout or stderr [needed
for msys2/bash]
- bsnes, higan: program/interface.cpp renamed to program/platform.cpp
- bsnes: trim ".shader/" from names in Settings→Shader menu
- bsnes: Settings→Shader menu updated on video driver changes
- bsnes: remove missing games from recent files list each time it is
updated
- bsnes: video multiplier menu generated dynamically based on largest
monitor size at program startup
- bsnes: added shrink window and center window function to video
multiplier menu
- bsnes: de-minimize presentation window when exiting fullscreen mode
or changing video multiplier
- bsnes: center the load game dialog against the presentation window
(important for multi-monitor setups)
- bsnes: screenshots are not immediate instead of delayed one frame
- bsnes: added frame advance menu option and hotkey
- bsnes: added enable cheats checkbox and hotkey; can be used to
quickly enable/disable all active cheats
Errata:
- hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`,
`SW_MAXIMIZE`
- hiro/Windows: add pMonitor::workspace()
- hiro/Windows: add setMaximized(), setMinimized() in
pWindow::construct()
- bsnes: call setCentered() after setMaximized(false)
byuu says:
Changelog:
- nall: added -static-libgcc -static-libstdc++ to Windows/GCC link
flags
- bsnes, higan: added program icons to main window when game isn't
loaded
- bsnes: improved recent games menu sorting
- bsnes: fixed multi-game recent game loading on Windows
- bsnes: completed path override support
- bsnes, higan: added screensaver suppression on Windows
- icarus: add 32K volatile RAM to SuperFX boards that report no RAM
(fixes Starfox)
- bsnes, higan: added automatic dependency generation [Talarubi]
- hiro/GTK: appending actions to menus restores enabled() state
- higan: use board node inside manifest.bml if it exists
- bsnes: added blur emulation and color emulation options to view menu
- ruby: upgraded input.sdl to SDL 2.0 (though it makes no functional
difference sadly)
- ruby: removed video.sdl (due to deprecating SDL 1.2)
- nall, ruby: improvements to HID class (generic vendor and product
IDs)
Errata:
- bsnes, higan: on Windows, Application::Windows::onScreenSaver needs
`[&]` lambda capture, not `[]`
- find it in presentation/presentation.cpp
byuu says:
Changelog:
- bsnes:
- added full input mapping support (multi-mapping, digital+analog
inputs, rumble, hotkeys, etc)
- can now load multi-part games (eg Super Game Boy) from the
command-line
- added recent games menu with list clear function; supports
multi-part games (sorting logic incomplete)
- added automatic binding of gamepads on new configuration files
- added view scaling support with aspect correction, overscan
cropping, and integral scaling modes
- added video shader support
- added status bar (can be hidden)
- added save states (both menu and hotkeys)
- added fullscreen mode support
- added support for loading compressed (ZIP) archives for any
supported media type (SNES, GB, etc)
- added frame counter
- added auto-memory saving
- added pause / block-input modes when main window loses focus
- added --fullscreen command-line option to start bsnes in
fullscreen mode
- added input settings panel
- added hotkeys settings panel
- added path settings panel (paths aren't actually used set, but
can be assigned)
- higan: fixed macOS install rule [Sintendo]
- higan: minor UI code cleanups
- nall: renamed Processor to Architecture to fix macOS builds
[Sintendo]
Yeah, you read right: recent games menu, path settings. And dynamic rate
control + screensaver suppression is on the todo list. I'm not fucking
around this time. I really want to make something special here.
byuu says:
Changelog:
* yes.
But seriously, a list of changes on a pre-alpha GUI is going to get annoying.
Basically, work on embedding stuff in the binary, firmware loading (both
appended to the ROM and in a firmware/ subfolder) added, SGB games can be
loaded, config file holds more values for driver settings, added ruby drivers to
other platforms, etc.
byuu says:
Changelog:
- higan: target-tomoko has been renamed to target-higan
- Super Famicom: event has been renamed to
processor(architecture=uPD78214)
- Super Famicom: SNES-EVENT supported once more; under board IDs
EVENT-CC92 and EVENT-PF94
- Super Famicom: SNES-EVENT preliminarily set up to use DIP switch
settings ala the Nintendo Super System (incomplete)
- Super Famicom: MCC PSRAM moved inside the MCU, as it is remappable
- Super Famicom: MCC emulation rewritten from scratch; it is now
vastly more accurate than before
- Super Famicom: added BSC-1A5B9P-01 board definition to database;
corrected BS-MCC-RAM board definition
- Super Famicom: moved SHVC-LN3B-01 RAM outside of
processor(identifier=SDD1)
- higan: when selecting a default game to load for a new system entry,
it will change the system option to match the media type
- higan: the load text box on the system entry window is now editable;
can be used to erase entries
- icarus: fixed bug in Famicom importing
- icarus: importing unappended SNES coprocessor firmware will now
rename the firmware properly
- hiro/GTK,Qt: WM_CLASS is now set correctly in `argv[0]`, so
applications should show “higan”, “icarus” instead of “hiro” now
Note: if you wish to run the BS-X town cartridge, the database currently
lists the download RAM as type “PSRAM”. This needs to be changed to
“RAM” in order to load properly. Otherwise, the emulator will bomb
out on the load window, because BSC-1A5B9P-01 expects PSRAM to always be
present, but it won't find it with the wrong memory type. I'll correct
this in the database in a later release. For now, you can copy the game
portion of the manifest to a new manifest.bml file and drop it into the
gamepak folder until I fix the database.
Tim Allen