byuu says:
I stand corrected, I managed to create and even larger diff than ever.
This one weighs in at 309KiB `>__>`
I'll have to create a changelog later, I'm too tired right now to go
through all of that.
byuu says:
Changelog:
- game/memory/type/battery → game/memory/volatile
- (manufacturer.)content.type → (architecture.)content.type
- nall: Markup::find() strips spaces from values in comparisons
- higan: updated game manifest loading/saving code for all cores
- GBA: flash memory ID is internally selected based on the
manufacturer and memory size
- SFC: ST018 (ARM6) frequency can be modified via game manifest now
- WS: EEPROM::name removed (not useful)
- icarus, genius: battery→volatile updates
I did my best to look over the diff between r13 and r14, but it's 84KiB
excluding the game database changes. It's just too much for me. I'd
greatly appreciate if someone could look over it and check for any
errors in this update. But more than likely, I suppose we'll iron out
any issues by determining which games fail to load.
Right now, I know the Super Game Boy support doesn't seem to work. But
all non-SFC cores should work fully, and all normal + NEC DSP SFC games
should work as well. Unsure about the rest.
Also, I'm planning to change the Game Boy “MBC1M” mapper to “MBC1#A” to
indicate it's an alternate wiring configuration of the stock MBC1, and
not a new mapper type.
byuu says:
Changelog:
- nall: `Markup::Node::operator[]` now uses `find()` instead of `lookup()`
behind the scenes
- Super Famicom: RAM memory ordering is now independent of ROM memory
ordering
- Super Famicom: added 19 new generic board definitions
- icarus: improved Super Famicom heuristics generation
Not putting it in the changelog, but the SPC7110 RAM now has write
protection disabled again.
99% of games should now be playable with heuristics. The exceptions
should be:
- 4MB LoROM games with SRAM (Ys 3, FE: Thracia 776)
- 2MB DSP LoROM games
- BS-X Town
- BS-X slotted games
- SA1 BSX slotted games
- SPC7110 games without the RTC (Momotarou Dentetsu Happy, Super Power
League 4)
- SPC7110 7MB fan translation (wasn't supported earlier either)
- ExLoROM games (wasn't supported earlier either)
- Sufami Turbo
- Campus Challenge '92 and Powerfest '94
- ST010 is going to run at 15MHz instead of 11MHz
- MSU1 (needs to be supported in higan, not icarus)
I'll add support for most of these before the release of v107.
byuu says:
Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
- but they're now optimized to the realities of the PPU (16-bit data
sizes / no address parameter / where appropriate)
- basically used to get the active-display overrides in a unified place;
but also reduces duplicate code in (read,write)IO
byuu says:
Changelog:
- nall/vector rewritten from scratch
- higan/audio uses nall/vector instead of raw pointers
- higan/sfc/coprocessor/sdd1 updated with new research information
- ruby/video/glx and ruby/video/glx2: fuck salt glXSwapIntervalEXT!
The big change here is definitely nall/vector. The Windows, OS X and Qt
ports won't compile until you change some first/last strings to
left/right, but GTK will compile.
I'd be really grateful if anyone could stress-test nall/vector. Pretty
much everything I do relies on this class. If we introduce a bug, the
worst case scenario is my entire SFC game dump database gets corrupted,
or the byuu.org server gets compromised. So it's really critical that we
test the hell out of this right now.
The S-DD1 changes mean you need to update your installation of icarus
again. Also, even though the Lunar FMV never really worked on the
accuracy core anyway (it didn't initialize the PPU properly), it really
won't work now that we emulate the hard-limit of 16MiB for S-DD1 games.
byuu says:
New update. Most of the work today went into eliminating hiro::Image
from all objects in all ports, replacing with nall::image. That took an
eternity.
Changelog:
- fixed crashing bug when loading games [thanks endrift!!]
- toggling "show status bar" option adjusts window geometry (not
supposed to recenter the window, though)
- button sizes improved; icon-only button icons no longer being cut off
byuu says:
Changelog:
- entire GBA core ported to auto function() -> return; syntax
- fixed GBA BLDY bug that was causing flickering in a few games
- replaced nall/config usage with nall/string/markup/node
- this merges all configuration files to a unified settings.bml file
- added "Ignore Manifests" option to the advanced setting tab
- this lets you keep a manifest.bml for an older version of higan; if
you want to do regression testing
Be sure to remap your controller/hotkey inputs, and for SNES, choose
"Gamepad" from "Controller Port 1" in the system menu. Otherwise you
won't get any input. No need to blow away your old config files, unless
you want to.
byuu says:
Changelog:
- fixed I/O register reads; perfect score on endrift's I/O tests now
- fixed mouse capture clipping on Windows [Cydrak]
- several hours of code maintenance work done on the SFC core
All higan/sfc files should now use the auto fn() -> ret; syntax. Haven't
converted all unsigned->uint yet. Also, probably won't do sfc/alt as
that's mostly just speed hack stuff.
Errata:
- forgot auto& instead of just auto on SuperFamicom::Video::draw_cursor,
which makes Super Scope / Justifier crash. Will be fixed in the next
WIP.
byuu says:
Changelog:
- return open bus instead of mirroring addresses on the bus (fixes
Mario&Luigi, Minish Cap, etc) [Jonas Quinn]
- add boolean flag to load requests for slotted game carts (fixes slot
load prompts)
- rename BS-X Town cart from psram to ram
- icarus: add support for game database
Note: I didn't rename "bsx" to "mcc" in the database for icarus before
uploading that. But I just fixed it locally, so it'll be in the next
WIP. For now, make it create the manifest for you and then rename it
yourself. I did fix the PSRAM size to 256kbit.
byuu says:
Changelog:
- synchronizes lots of nall changes
- changes displayed program title from tomoko to higan(*)
- browser dialog sort is case-insensitive
- .sys folders look at user-selected library path; no longer hard-coded
Tried to get rid of the file modes from the Windows browser dialog, but
it was being a bitch so I left it on for now.
- The storage locations and binary still use tomoko. I'm not really sure
what to do here. The idea is there may be more than one "higan" UI in
the future, but I don't want people to go around calling the entire
program by the UI name. For official Windows releases, I can rename
the binaries to "higan-{profile}.exe", and by putting the config files
with the binary, they won't ever see the tomoko folder. Linux is of
course trickier.
Note: Windows users will need to edit hiro/components.hpp and comment
out these lines:
#define Hiro_Console
#define Hiro_IconView
#define Hiro_SourceView
#define Hiro_TreeView
I forgot to do that, and too lazy to upload another WIP.
byuu says:
Main reason for this WIP was because of all the added lines to hiro for
selective component disabling. May as well get all the diff-noise apart
from code changes.
It also merges something I've been talking to Cydrak about ... making
nall::string::(integer,decimal) do built-in binary,octal,hex decoding
instead of just failing on those. This will have fun little side effects
all over the place, like being able to view a topic on my forum via
"forum.byuu.org/topic/0b10010110", heh.
There are two small changes to higan itself, though. First up, I fixed
the resampler ratio when loading non-SNES games. Tested and I can play
Game Boy games fine now. Second, I hooked up menu option hiding for
reset and controller selection. Right now, this works like higan v094,
but I'm thinking I might want to show the "Device -> Controller" even if
that's all that's there. It kind of jives nicer with the input settings
window to see the labels there, I think. And if we ever do add more
stuff, it'll be nice that people already always expect that menu there.
Remaining issues:
* add slotted cart loader (SGB, BSX, ST)
* add DIP switch selection window (NSS)
* add timing configuration (video/audio sync)
byuu says:
This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.
I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.
I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.
That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
Tim Allen