* add support for TableView::onActivate(TableViewCell) to Windows, macOS
** allows the new input/hotkey mapping panels to work on Windows, macOS
* polish BrowserDialog behavior
* added CPU and SA1 overclocking support
* added fast forward speed limiting
* added option to mute during fast forwarding and rewinding
* lowered volume when not muting during FF/rewind
* reformatted settings/tools windows from tabs to lists
* moved focus settings to input settings panel
* redesigned input and hotkey settings panels to be easier to use
* fixed offscreen placement issue with path settings panel
* added hotkey combinational logic option (AND / OR mode setting)
* added search support to file browser dialog
* fixed --fullscreen command-line option
byuu says:
Don't let the point release fool you, there are many significant changes in this
release. I will be keeping bsnes releases using a point system until the new
higan release is ready.
Changelog:
- GUI: added high DPI support
- GUI: fixed the state manager image preview
- Windows: added a new waveOut driver with support for dynamic rate control
- Windows: corrected the XAudio 2.1 dynamic rate control support [BearOso]
- Windows: corrected the Direct3D 9.0 fullscreen exclusive window centering
- Windows: fixed XInput controller support on Windows 10
- SFC: added high-level emulation for the DSP1, DSP2, DSP4, ST010, and Cx4
coprocessors
- SFC: fixed a slight rendering glitch in the intro to Megalomania
If the coprocessor firmware is missing, bsnes will fallback on HLE where it is
supported, which is everything other than SD Gundam GX and the two Hayazashi
Nidan Morita Shougi games.
The Windows dynamic rate control works best with Direct3D in fullscreen
exclusive mode. I recommend the waveOut driver over the XAudio 2.1 driver, as it
is not possible to target a single XAudio2 version on all Windows OS releases.
The waveOut driver should work everywhere out of the box.
Note that with DRC, the synchronization source is your monitor, so you will
want to be running at 60hz (NTSC) or 50hz (PAL). If you have an adaptive sync
monitor, you should instead use the WASAPI (exclusive) or ASIO audio driver.
byuu says:
The Windows port can now run the emulation while navigating menus,
moving windows, and resizing windows. The main window also doesn't try
so hard to constantly clear itself. This may leave a bit of unwelcome
residue behind in some video drivers during resize, but under most
drivers, it lets you resize without a huge amount of flickering.
On all platforms, I now also run the emulation during MessageWindow
modal events, where I didn't before.
I'm thinking we should probably mute the audio during modal periods,
since it can generate a good deal of distortion.
The tooltip timeout was increased to ten seconds.
On Windows, the enter key can now activate buttons, so you can more
quickly dismiss MessageDialog windows. This part may not actually work
... I'm in the middle of trying to get messages out of the global
`Application_windowProc` hook and into the individual `Widget_windowProc`
hooks, so I need to do some testing.
I fixed a bug where changing the input driver wouldn't immediately
reload the input/hotkey settings lists properly.
I also went from disabling the driver "Change" button when the currently
active driver is selected in the list, to instead setting it to say
"Reload", and I also added a tool tip to the input driver reload button,
advising that if you're using DirectInput or SDL, you can hit "Reload"
to rescan for hotplugged gamepads without needing to restart the
emulator. XInput and udev have auto hotswap support. If we can ever get
that into DirectInput and SDL, then I'll remove the tooltip. But
regardless, the reload functionality is nice to have for all drivers.
I'm not sure what should happen when a user changes their driver
selection while a game is loaded, gets the warning dialog, chooses not
to change it, and then closes the emulator. Currently, it will make the
change happen the next time you start the emulator. This feels a bit
unexpected, but when you change the selection without a game loaded, it
takes immediate effect. So I'm not really sure what's best here.
byuu says:
I've added tool tips to hiro for Windows, GTK, and Qt. I'm unsure how to
add them for Cocoa. I wasted am embarrassing ~14 hours implementing tool
tips from scratch on Windows, because the `TOOLTIPS_CLASS` widget just
absolutely refused to show up, no matter what I tried. As such, they're
not quite 100% native, but I would really appreciate any patch
submissions to help improve my implementation.
I added tool tips to all of the confusing settings in bsnes. And of
course, for those of you who don't like them, there's a configuration
file setting to turn them off globally.
I also improved Mega Drive handling of the Game Genie a bit, and
restructured the way the Settings class works in bsnes.
Starting now, I'm feature-freezing bsnes and higan. From this point
forward:
- polishing up and fixing bugs caused by the ruby/hiro changes
- adding DRC to XAudio2, and maybe exclusive mode to WGL
- correcting FEoEZ (English) to load and work again out of the box
Once that's done, a final beta of bsnes will go out, I'll fix any
reported bugs that I'm able to, and then v107 should be ready. This time
with higan being functional, but marked as v107 beta. v108 will restore
higan to production status again, alongside bsnes.
byuu says:
I fixed all outstanding bugs that I'm aware of, including all of the
errata I listed yesterday.
And now it's time for lots of regression testing.
After that, I need to add Talarubi's XAudio2 DRC code, and then get a
new public bsnes WIP out for final testing.
New errata: when setting an icon (nall::image) larger than a Canvas on
Windows, it's not centering the image, so you end up seeing the overscan
area in the state manager previews, and the bottom of the image gets cut
off. I also need to forcefully disable the Xlib screensaver disable
support. I think I'll remove the GUI option to bypass it as well, and
just force screensaver disable always on with Windows. I'll improve it
in the future to toggle the effect between emulator pauses.
byuu says:
Everything *should* be working again, but of course that won't
actually be the case. Here's where things stand:
- bsnes, higan, icarus, and genius compile and run fine on FreeBSD
with GTK
- ruby video and audio drivers are untested on Windows, macOS, and
Linux
- hiro is untested on macOS
- bsnes' status bar is not showing up properly with hiro/qt
- bsnes and higan's about screen is not showing up properly with
hiro/qt (1x1 window size)
- bsnes on Windows crashes often when saving states, and I'm not sure
why ... it happens inside Encode::RLE
- bsnes on Windows crashes with ruby.input.windows (unsure why)
- bsnes on Windows fails to show the verified emblem on the status bar
properly
- hiro on Windows flickers when changing tabs
To build the Windows bsnes and higan ports, use
ruby="video.gdi audio.directsound"
Compilation error logs for Linux will help me fix the inevitable list of
typos there. I can fix the typos on other platforms, I just haven't
gotten to it yet.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
byuu says:
The problems with the Windows and Qt4 ports have all been resolved,
although there's a fairly gross hack on a few Qt widgets to not destruct
once Application::quit() is called to avoid a double free crash (I'm
unsure where Qt is destructing the widgets internally.) The Cocoa port
compiles again at least, though it's bound to have endless problems. I
improved the Label painting in the GTK ports, which fixes the background
color on labels inside TabFrame widgets.
I've optimized the Makefile system even further.
I added a "redo state" command to bsnes, which is created whenever you
load the undo state. There are also hotkeys for both now, although I
don't think they're really something you want to map hotkeys to.
I moved the nall::Locale object inside hiro::Application, so that it can
be used to translate the BrowserDialog and MessageDialog window strings.
I improved the Super Game Boy emulation of `MLT_REQ`, fixing Pokemon
Yellow's custom border and probably more stuff.
Lots of other small fixes and improvements. Things are finally stable
once again after the harrowing layout redesign catastrophe.
Errata:
- ICD::joypID should be set to 3 on reset(). joypWrite() may as well
take uint1 instead of bool.
- hiro/Qt: remove pWindow::setMaximumSize() comment; found a
workaround for it
- nall/GNUmakefile: don't set object.path if it's already set (allow
overrides before including the file)
byuu says:
Changelog:
- bsnes, higan: simplified make output; reordered rules
- hiro: added Window::set(Minimum,Maximum)Size() [only implemented in
GTK+ so far]
- bsnes: only allow the window to be shrunk to the 1x multiplier size
- bsnes: refactored Integral Scaling checkbox to {Center, Scale,
Stretch} radio selection
- nall: call fflush() after nall::print() to stdout or stderr [needed
for msys2/bash]
- bsnes, higan: program/interface.cpp renamed to program/platform.cpp
- bsnes: trim ".shader/" from names in Settings→Shader menu
- bsnes: Settings→Shader menu updated on video driver changes
- bsnes: remove missing games from recent files list each time it is
updated
- bsnes: video multiplier menu generated dynamically based on largest
monitor size at program startup
- bsnes: added shrink window and center window function to video
multiplier menu
- bsnes: de-minimize presentation window when exiting fullscreen mode
or changing video multiplier
- bsnes: center the load game dialog against the presentation window
(important for multi-monitor setups)
- bsnes: screenshots are not immediate instead of delayed one frame
- bsnes: added frame advance menu option and hotkey
- bsnes: added enable cheats checkbox and hotkey; can be used to
quickly enable/disable all active cheats
Errata:
- hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`,
`SW_MAXIMIZE`
- hiro/Windows: add pMonitor::workspace()
- hiro/Windows: add setMaximized(), setMinimized() in
pWindow::construct()
- bsnes: call setCentered() after setMaximized(false)
byuu says:
Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
- but they're now optimized to the realities of the PPU (16-bit data
sizes / no address parameter / where appropriate)
- basically used to get the active-display overrides in a unified place;
but also reduces duplicate code in (read,write)IO
byuu says:
Changelog:
- fixed major nall/vector/prepend bug
- renamed hiro/ListView to hiro/TableView
- added new hiro/ListView control which is a simplified abstraction of
hiro/TableView
- updated higan's cheat database window and icarus' scan dialog to use
the new ListView control
- compilation works once again on all platforms (Windows, Cocoa, GTK,
Qt)
- the loki skeleton compiles once again (removed nall/DSP references;
updated port/device ID names)
Small catch: need to capture layout resize events internally in Windows
to call resizeColumns. For now, just resize the icarus window to get it
to use the full window width for list view items.
byuu says:
New update. Most of the work today went into eliminating hiro::Image
from all objects in all ports, replacing with nall::image. That took an
eternity.
Changelog:
- fixed crashing bug when loading games [thanks endrift!!]
- toggling "show status bar" option adjusts window geometry (not
supposed to recenter the window, though)
- button sizes improved; icon-only button icons no longer being cut off
byuu says:
Changelog:
- added MSU1 resume support
- updated sfc/dsp, sfc/controller to match my coding style
- fixed hiro/Windows Button and ListView::CheckButton in Windows Classic
mode
byuu says:
- fixes checkboxes (-again- again [*again*])
- won't check folders with select all / unselect all
- won't crash anymore if the SNES ROM image is too small (Saturday Night
Slam Masters was crashing it before due to DB size error)
- corrected heuristics for Sufami Turbo base cart (mirrors the
absurdities of the real cart precisely, since it's one of a kind)
- corrected a few DB issues (BS-X name + PSRAM (again [*again*]), SNSM,
LAH) (_again_)
- these are temporary. Monkey patched in the generated .hpp source
rather than the actual DB
- not going to fix the SFT sizes because I want to verify what
happened there first
byuu says:
Updated to compile with all of the new hiro changes. My next step is to
write up hiro API documentation, and move the API from alpha (constantly
changing) to beta (rarely changing), in preparation for the first stable
release (backward-compatible changes only.)
Added "--fullscreen" command-line option. I like this over
a configuration file option. Lets you use the emulator in both modes
without having to modify the config file each time.
Also enhanced the command-line game loading. You can now use any of
these methods:
higan /path/to/game-folder.sfc
higan /path/to/game-folder.sfc/
higan /path/to/game-folder.sfc/program.rom
The idea is to support launchers that insist on loading files only.
Technically, the file can be any name (manifest.bml also works); the
only criteria is that the file actually exists and is a file, and not
a directory. This is a requirement to support the first version (a
directory lacking the trailing / identifier), because I don't want my
nall::string class to query the file system to determine if the string
is an actual existing file or directory for its pathname() / dirname()
functions.
Anyway, every game folder I've made so far has program.rom, and that's
very unlikely to change, so this should be fine.
Now, of course, if you drop a regular "game.sfc" file on the emulator,
it won't even try to load it, unless it's in a folder that ends in .fc,
.sfc, etc. In which case, it'll bail out immediately by being unable to
produce a manifest for what is obviously not really a game folder.
byuu says:
I imagine you guys will like this WIP very much.
Changelog:
- ListView check boxes on Windows
- ListView removal of columns on reset (changing input dropdowns)
- DirectSound audio duplication on latency change
- DirectSound crash on 20ms latency
- Fullscreen window sizing in multi-monitor setups
- Allow joypad bindings of hotkeys
- Allow triggers to be mapped (Xbox 360 / XInput / Windows only)
- Support joypad rumble for Game Boy Player
- Video scale settings modified from {1x,2x,3x} to {2x,3x,4x}
- System menu now renames to active emulation core
- Added fast forward hotkey
Not changing for v095:
- not adding input focus settings yet
- not adding shaders yet
Not changing at all:
- not implementing maximize
byuu says:
Changelog (since the last open beta):
- icarus is now included. icarus is used to import game files/archives
into game paks (folders)
- SNES: mid-scanline BGMODE changes now emulated correctly (used only by
atx2.smc Anthrox Demo)
- GBA: fixed a CPU bug that was causing dozens of games to have
distorted audio
- GBA: fixed default FlashROM ID; should allow much higher compatibility
- GBA: now using Cydrak's new, much improved, GBA color emulation filter
(still a work-in-progress)
- re-added command-line loading support for game paks (not for game
files/archives, sorry!)
- Qt port now compiles and runs again (may be a little buggy;
Windows/GTK+ ports preferred)
- SNES performance profile now compiles and runs again
- much more
byuu says:
Changelog:
- updated to newest hiro API
- SFC performance profile builds once again
- hiro: Qt port completed
Errata 1: the hiro/Qt target won't run tomoko just yet. Starts by
crashing inside InputSettings because hiro/Qt isn't forcefully selecting
the first item added to a ComboButton just yet. Even with a monkey patch
to get around that, the UI is incredibly unstable. Lots of geometry
calculation bugs, and a crash when you try and access certain folders in
the browser dialog. Lots of work left to be done there, sadly.
Errata 2: the hiro/Windows port has black backgrounds on all ListView
items. It's because I need to test for unassigned colors and grab the
default Windows brush colors in those cases.
Note: alternating row colors on multi-column ListView widgets is gone
now. Not a bug. May add it back later, but I'm not sure. It doesn't
interact nicely with per-cell background colors.
Things left to do:
First, I have to fix the Windows and Qt target bugs.
Next, I need to go through and revise the hiro API even more (nothing
too major.)
Next, I need to update icarus to use the new hiro API, and add support
for the SFC games database.
Next, I have to rewrite my TSV->BML cheat code tool.
Next, I need to post a final WIP of higan+icarus publicly and wait a few
days.
Next, I need to fix any bugs reported from the final WIP that I can.
Finally, I should be able to release v095.
byuu says:
Changelog:
- GBA emulation accuracy has been substantially improved [Cydrak]
- GBA ldm bug fixed [jchadwick]
- SNES SuperFX timing has been improved [AWJ, ARM9, qwertymodo]
- SNES accuracy profile is now ~8% faster than before
- you no longer need to copy the .sys profile folders to
~/Emulation/System
- you still need to put bios.rom (GBA BIOS) into Game Boy
Advance.sys to use GBA emulation!!
- you no longer need to pre-configure inputs before first use
- loading games / changing window size won't recenter window
- checkboxes in cheat editor update correctly
- can't type into state manager description textbox on an empty slot
- typing in state manager description box works correctly; and updates
list view correctly
- won't show files that match game extensions anymore (only game folders
show up)
- libco Win64 port fixes with FPU^H^H^H XMM registers
- libco ARM port now available; so you too can play at 15fps on an RPi2!
[jessedog3, Cydrak]
- controller selection will check the default item in the menu now on
game load
- as usual, a whole lot of other stuff I'm forgetting
Known issues:
- type-ahead find does not work in list views (eg game selection
dialog); I don't know how to fix this
- there's no game file importer yet
- there's no shader support yet
- there's no profiler available for the timing panel, you need to adjust
values manually for now
byuu says:
Added AWJ's fixes for alt/cpu (Tetris Attack framelines issue) and
alt/dsp (Thread::clock reset)
Added fix so that the taskbar entry appears when the application first
starts on Windows.
Fixed checkbox toggling inside of list views on Windows.
Updated nall/image to properly protect variables that should not be
written externally.
New Object syntax for hiro is in.
Fixed the backwards-typing on Windows with the state manager.
NOTE: the list view isn't redrawing when you change the description
text. It does so on the cheat editor because of the resizeColumns call;
but that shouldn't be necessary. I'll try and fix this for the next WIP.
byuu says:
Windows port should run mostly well now, although exiting fullscreen
breaks the application in a really bizarre way. (clicking on the window
makes it sink to background rather than come to the foreground o_O)
I also need to add the doModalChange => audio.clear() thing for the
accursed menu stuttering with DirectSound.
I also finished porting all of the ruby drivers over to the newer API
changes from nall.
Since I can't compile the Linux or OS X drivers, I have no idea if there
are any typos that will result in compilation errors. If so, please let
me know where they're at and I'll try and fix them. If they're simple,
please try and fix them on your end to test further if you can.
I'm hopeful the udev crash will be gone now that nall::string checks for
null char* values passed to its stringify function. Of course, it's
a problem it's getting a null value in the first place, so it may not
work at all.
If you can compile on Linux (or by some miracle, OS X), please test each
video/audio/input driver if you don't mind, to make sure there's no
"compiles okay but still typos exist" bugs.
byuu says:
Finally!! Compilation works once again on Windows.
However, it's pretty buggy. Modality isn't really working right, you can
still poke at other windows, but when you select ListView items, they
redraw as empty boxes (need to process WM_DRAWITEM before checking
modality.)
The program crashes when you close it (probably a ruby driver's term()
function, that's what it usually is.)
The Layout::setEnabled(false) call isn't working right, so you get that
annoying chiming sound and cursor movement when mapping keyboard keys to
game inputs.
The column sizing seems off a bit on first display for the Hotkeys tab.
And probably lots more.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
byuu