mirror of https://github.com/bsnes-emu/bsnes.git
8 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
3d34517f3e |
Update to v106r61 release.
byuu says: This release adds ikari's Cx4 notes to bsnes. It fixes the MMX2 intro's boss fight sequence to be frame perfect to real hardware. It's also very slightly faster than before. I've also added an option to toggle the CPU↔coprocessor cycle synchronization to the emulation settings panel, so you don't have to recompile to get the more accurate SA1 timings. I'm most likely going to default this to disabled in bsnes, and *maybe* enabled in higan out of the box. StaticRAM (wasn't used) and MappedRAM are gone from the Super Famicom core. Instead, there's now ReadableMemory, WritableMemory, and ProtectedMemory (WritableMemory with a toggle for write protection.) Cartridge::loadMap now takes a template Memory object, which bypasses an extra virtual function call on memory accesses, but it doesn't really impact speed much. Whatever. |
|
|
Tim Allen
|
3d8be92550 |
Update to v106r3 release.
byuu says:
Changelog:
- Super Famicom: update to newer board markup syntax
- Super Famicom: update all mapped ROMs to be write-protected
- errata: SPC7110 set ram.writeProtect(true), I'll fix it in the
next WIP
- icarus: rewrote the Super Famicom heuristics module from scratch
Instead of icarus heuristics generating higan-specific mappings, it now
generates generic board IDs that can be used by any emulator. I had
originally planned to print out real PCB ID codes here, but these board
mappings are meant to be more generic, and I don't want them to look
real. The pseudo-codes are easy to parse, for example: `DSP-LOROM-NVRAM`
for Super Mario Kart, `SUPERFX-RAM` for Doom.
I'm going to make a `Boards (Generic).bml` file that will contain mapping
definitions for every board. Until this is done, any games not in the SNES
preservation database will fail to play because the mapping information is
now missing.
|
|
|
Tim Allen
|
e9d2d56df9 |
Update to v105r1 release.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
|
|
|
Tim Allen
|
f48b332c83 |
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
|
|
|
Tim Allen
|
47d4bd4d81 |
Update to v096r01 release.
byuu says: Changelog: - restructured the project and removed a whole bunch of old/dead directives from higan/GNUmakefile - huge amounts of work on hiro/cocoa (compiles but ~70% of the functionality is commented out) - fixed a masking error in my ARM CPU disassembler [Lioncash] - SFC: decided to change board cic=(411,413) back to board region=(ntsc,pal) ... the former was too obtuse If you rename Boolean (it's a problem with an include from ruby, not from hiro) and disable all the ruby drivers, you can compile an OS X binary, but obviously it's not going to do anything. It's a boring WIP, I just wanted to push out the project structure change now at the start of this WIP cycle. |
|
|
Tim Allen
|
4e2eb23835 |
Update to v093 release.
byuu says: Changelog: - added Cocoa target: higan can now be compiled for OS X Lion [Cydrak, byuu] - SNES/accuracy profile hires color blending improvements - fixes Marvelous text [AWJ] - fixed a slight bug in SNES/SA-1 VBR support caused by a typo - added support for multi-pass shaders that can load external textures (requires OpenGL 3.2+) - added game library path (used by ananke->Import Game) to Settings->Advanced - system profiles, shaders and cheats database can be stored in "all users" shared folders now (eg /usr/share on Linux) - all configuration files are in BML format now, instead of XML (much easier to read and edit this way) - main window supports drag-and-drop of game folders (but not game files / ZIP archives) - audio buffer clears when entering a modal loop on Windows (prevents audio repetition with DirectSound driver) - a substantial amount of code clean-up (probably the biggest refactoring to date) One highly desired target for this release was to default to the optimal drivers instead of the safest drivers, but because AMD drivers don't seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD has too big a market share. Hopefully with v093 officially released, we can get some public input on what AMD doesn't like. |
|
|
Tim Allen
|
29ea5bd599 |
Update to v092r09 release.
byuu says:
This will be another massive diff from the previous version.
All of higan was updated to use the new foo& bar syntax, and I also
updated switch statements to be consistent as well (but not in the
disassemblers, was starting to get an RSI just from what I already did.)
phoenix/{windows, cocoa, qt} need to be updated to use "string foo"
instead of "const string& foo", and after that, the major diffs should
be finished.
This archive is the first time I'm posting my copy-on-write,
size+capacity nall::string class, so any feedback on that is welcome as
well.
|
|
|
Tim Allen
|
bbc33fe05f |
Update to higan v092r01, ananke v02r01 and purify v03r01 releases.
byuu says: higan changelog: - compiler is set to g++-4.7, subst(cc,++) rule is gone, C files compile with $(compiler) -x c - make throws an error when you specify an invalid profile or compile on an unsupported platform (instead of hanging forever) - added unverified.png to resources (causes too big of a speed hit to actually check for folder/unverified file ... so disabled for now) - fixed default browser paths for Game Boy, Sufami Turbo and BS-X Satellaview (have to delete paths.cfg to see this) - browser home button seeks to configpath()/higan/library.cfg - settings->driver is now settings->advanced, and it adds game library path setting and profile information - emulation cores now load manifest files internally, manifest.bml is not required for a game folder to be recognized by higan as such - BS-X Satellaview and Sufami Turbo slot cartridge handling moved out of sfc/chip and into sfc/slot - Video::StartFullScreen only sets fullscreen when a game is specified on the command-line purify and ananke changelog: - library output path shown in purify window - added button to change library path - squelch firmware warning windows to prevent multi-threading crash, but only via purify (they show up in higan still) |