Commit Graph

37 Commits

Author SHA1 Message Date
byuu 903d1e4012 v107.8
* GB: integrated SameBoy v0.12.1 by Lior Halphon
* SFC: added HG51B169 (Cx4) math tables into bsnes binary
2019-07-17 21:11:46 +09:00
Tim Allen d87a0f633d Update to bsnes v107r4 beta release.
byuu says:

  - bsnes: added video filters from bsnes v082
  - bsnes: added ZSNES snow effect option when games paused or unloaded
    (no, I'm not joking)
  - bsnes: added 7-zip support (LZMA 19.00 SDK)

[Recent higan WIPs have also mentioned bsnes changes, although the higan code
no longer includes the bsnes code. These changes include:

  - higan, bsnes: added EXLOROM, EXLOROM-RAM, EXHIROM mappings
  - higan, bsnes: focus the viewport after leaving fullscreen exclusive
    mode
  - bsnes: re-added mightymo's cheat code database
  - bsnes: improved make install rules for the game and cheat code
    databases
  - bsnes: delayed construction of hiro::Window objects to properly show
    bsnes window icons

- Ed.]
2019-07-07 19:44:09 +10:00
Tim Allen 4d7bb510f2 Update to bsnes v107.1 release.
byuu says:

Don't let the point release fool you, there are many significant changes in this
release. I will be keeping bsnes releases using a point system until the new
higan release is ready.

Changelog:

  - GUI: added high DPI support
  - GUI: fixed the state manager image preview
  - Windows: added a new waveOut driver with support for dynamic rate control
  - Windows: corrected the XAudio 2.1 dynamic rate control support [BearOso]
  - Windows: corrected the Direct3D 9.0 fullscreen exclusive window centering
  - Windows: fixed XInput controller support on Windows 10
  - SFC: added high-level emulation for the DSP1, DSP2, DSP4, ST010, and Cx4
    coprocessors
  - SFC: fixed a slight rendering glitch in the intro to Megalomania

If the coprocessor firmware is missing, bsnes will fallback on HLE where it is
supported, which is everything other than SD Gundam GX and the two Hayazashi
Nidan Morita Shougi games.

The Windows dynamic rate control works best with Direct3D in fullscreen
exclusive mode. I recommend the waveOut driver over the XAudio 2.1 driver, as it
is not possible to target a single XAudio2 version on all Windows OS releases.
The waveOut driver should work everywhere out of the box.

Note that with DRC, the synchronization source is your monitor, so you will
want to be running at 60hz (NTSC) or 50hz (PAL). If you have an adaptive sync
monitor, you should instead use the WASAPI (exclusive) or ASIO audio driver.
2019-04-09 11:16:30 +10:00
Tim Allen 25145f59cc Update to v106r80 release.
byuu says:

Any usage of natural and integer cast to 64-bit math operations now.
Hopefully this will be the last of the major changes for a bit on
nall/primitives, at least until serious work begins on removing implicit
conversion to primitive types.

I also completed the initial TLCS900H core, sans SWI (kind of a ways off
from support interrupts.) I really shouldn't say completed, though. The
micro DMA unit is missing, interrupt priority handling is missing,
there's no debugger, and, of course, there's surely dozens of absolutely
critical CPU bugs that are going to be an absolute hellscape nightmare
to track down.

It was a damn shame, right up until the very last eight instructions,
[CP|LD][I|D](R), the instruction encoding was consistent. Of course,
there could be other inconsistencies that I missed. In fact, that's
somewhat likely ... sigh.
2019-01-16 00:09:50 +11:00
Tim Allen 17fc6d8d51 Update to v106r79 release.
byuu says:

This WIP is just work on nall/primitives ...

Basically, I'm coming to the conclusion that it's just not practical to
try and make Natural/Integer implicitly castable to primitive signed and
unsigned integers. C++ just has too many edge cases there.

I also want to get away from the problem of C++ deciding that all math
operations return 32-bit values, unless one of the parameters is 64-bit,
in which case you get a 64-bit value. You know, so things like
array[-1] won't end up accessing the 4 billionth element of the array.
It's nice to be fancy and minimally size operations (eg 32-bit+32-bit =
33-bit), but it's just too unintuitive. I think all
Natural<X>+Natural<Y> expessions should result in a Natural<64> (eg
natural) type.

nall/primitives/operators.hpp has been removed, and new
Natural<>Natural / Integer<>Integer casts exist. My feeling is that
signed and unsigned types should not be implicitly convertible where
data loss can occur. In the future, I think an integer8*natural8 is
fine to return an integer64, and the bitwise operators are probably all
fine between the two types. I could probably add
(Integer,Natural)+Boolean conversions as well.

To simplify expressions, there are new user-defined literals for _b
(boolean), _n (natural), _i (integer), _r (real), _n# (eg _n8),
_i# (eg _i8), _r# (eg _r32), and _s (nall::string).

In the long-term, my intention is to make the conversion and cast
constructors explicit for primitive types, but obviously that'll shatter
most of higan, so for now that won't be the case.

Something I can do in the future is allow implicit conversion and
casting to (u)int64_t. That may be a nice balance.
2019-01-15 15:33:20 +11:00
Tim Allen aaf094e7c4 Update to v106r69 release.
byuu says:

The biggest change was improving WonderSwan emulation. With help from
trap15, I tracked down a bug where I was checking the wrong bit for
reverse DMA transfers. Then I also emulated VTOTAL to support variable
refresh rate. Then I improved HyperVoice emulation which should be
unsigned samples in three of four modes. That got Fire Lancer running
great. I also rewrote the disassembler. The old one disassembled many
instructions completely wrong, and deviated too much from any known x86
syntax. I also emulated some of the quirks of the V30 (two-byte POP into
registers fails, SALC is just XLAT mirrored, etc) which probably don't
matter unless someone tries to run code to verify it's a NEC CPU and not
an Intel CPU, but hey, why not?

I also put more work into the MSX skeleton, but it's still just a
skeleton with no real emulation yet.
2019-01-02 10:52:08 +11:00
Tim Allen a3e0f6da25 Update to v106r60 release.
byuu says:

I added (imperfect) memory conflict timing to the SA1.

Before:

  - WRAM↔↔ROM ran 7% too fast
  - ROM↔↔ROM ran 100% too fast
  - WRAM↔↔IRAM ran 7% too fast
  - ROM↔↔IRAM ran 7% too fast
  - IRAM↔↔IRAM ran 287% too fast
  - BWRAM↔↔BWRAM ran 100% too fast
  - HDMA ROM↔↔ROM ran 15% too fast
  - HDMA WRAM↔↔ROM ran 15% too fast
  - DMA ROM↔↔ROM ran 100% too fast

After:

  - ROM↔↔ROM runs 14% too fast
  - HDMA WRAM↔↔ROM runs 7% too fast
  - DMA ROM↔↔ROM runs 4% too fast

If you enable this with the fast PPU + DSP, your framerate in SA1 games
will drop by 51%. And even if you disable it, you'll still lose 9% speed
in SA1 games, and 2% speed in non-SA1 games, because of changes needed
to make this support possible.

By default, I'm leaving this off. Compile with `-DACCURATE_SA1` (or
uncomment the line in sfc/sfc.hpp) if you want to try it out.

This'll almost certainly cause some SA1 regressions, so I guess we'll
tackle those as they arise.
2018-09-03 00:06:41 +10:00
Tim Allen bd814f0358 Update to v106r59 release.
byuu says:

Changelog:

  - fixed bug in Emulator::Game::Memory::operator bool()
  - nall: renamed view<string> back to `string_view`
  - nall:: implemented `array_view`
  - Game Boy: split cartridge-specific input mappings (rumble,
    accelerometer) to their own separate ports
  - Game Boy: fixed MBC7 accelerometer x-axis
  - icarus: Game Boy, Super Famicom, Mega Drive cores output internal
    header game titles to heuristics manifests
  - higan, icarus, hiro/gtk: improve viewport geometry configuration;
    fixed higan crashing bug with XShm driver
  - higan: connect Video::poll(),update() functionality
  - hiro, ruby: several compilation / bugfixes, should get the macOS
    port compiling again, hopefully [Sintendo]
  - ruby/video/xshm: fix crashing bug on window resize
      - a bit hacky; it's throwing BadAccess Xlib warnings, but they're
        not fatal, so I am catching and ignoring them
  - bsnes: removed Application::Windows::onModalChange hook that's no
    longer needed [Screwtape]
2018-08-26 16:49:54 +10:00
Tim Allen f9adb4d2c6 Update to v106r58 release.
byuu says:

The main thing I worked on today was emulating the MBC7 EEPROM.

And... I have many things to say about that, but not here, and not now...

The missing EEPROM support is why the accelerometer was broken. Although
it's not evidently clear that I'm emulating the actual values
incorrectly. I'll think about it and get it fixed, though.

bsnes went from ~308fps to ~328fps, and I don't even know why. Probably
something somewhere in the 140KB of changes to other things made in this
WIP.
2018-08-21 13:17:12 +10:00
Tim Allen 41e127a07c Update to v106r54 release.
byuu says:

Changes to hiro will break all but the GTK target. Not that it matters
much given that the only ruby drivers that function are all on BSD
anyway.

But if you are fortunate enough to be able to run this ... you'll find
lots of polishing improvements to the bsnes GUI. I posted some
screenshots on Twitter, if anyone were interested.
2018-08-04 21:44:00 +10:00
Tim Allen 5deba5cbc1 Update to 20180729 release.
byuu wrote:

Sigh ...

asio.hpp needs #include <nall/windows/registry.hpp>

[Since the last WIP, byuu also posted the following message. -Ed.]

ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.

I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.

Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.

I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.

I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 23:24:38 +10:00
Tim Allen 22bd4b9277 Update to v106r52 release.
byuu says:

I stand corrected, I managed to create and even larger diff than ever.
This one weighs in at 309KiB `>__>`

I'll have to create a changelog later, I'm too tired right now to go
through all of that.
2018-07-25 22:24:03 +10:00
Tim Allen 6090c63958 Update to v106r47 release.
byuu says:

This is probably the largest code-change diff I've done in years.

I spent four days working 10-16 hours a day reworking layouts in hiro
completely.

The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.

Windows, GTK2, and now GTK3 are fully supported.

Windows is getting the initial window geometry wrong by a bit.

GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.

Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.

Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.

The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.

Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.

higan crashes when you load a game, so that's not good. bsnes works
though.

bsnes also has the start of a localization engine now. Still a long way
to go.

The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 13:59:29 +10:00
Tim Allen ec9729a9e1 Update to v106r36 release.
byuu says:

Changelog:

  - nall: renamed array to adaptive_array; marked it as deprecated
  - nall: created new array class; which is properly static (ala
    std::array) with optional bounds-checking
  - sfc/ppu-fast: converted unmanaged arrays to use nall/array (no speed
    penalty)
  - bsnes: rewrote the cheat code editor to a new design
  - nall: string class can stringify pointer types directly now, so
    pointer() was removed
  - nall: added array_view and pointer types (still unsure if/how I'll
    use pointer)
2018-06-04 12:44:57 +10:00
Tim Allen 2b8df2e70e Update to v106r27 release.
byuu says:

Changelog:

  - nall: merged Path::config() and Path::local() to Path::userData()
      - ~/.local/share or %appdata or ~/Library/ApplicationSupport
  - higan, bsnes: render main window icon onto viewport instead of
    canvas
      - should hopefully fix a brief flickering glitch that appears on
        Windows
  - icarus: improved Super Famicom heuristics for Starfox / Starwing RAM
  - ruby/Direct3D: handle viewport size changes in lock() instead of
    output()
      - fixes icon disappearing when resizing main window
  - hiro/Windows: remove WS_DISABLED from StatusBar to fix window
    resize grip
      - this is experimental: I initially used WS_DISABLED to work
        around a focus bug
      - yet trying things now, said bug seems(?) to have gone away at
        some point ...
  - bsnes: added advanced settings panel with real-time driver change
    support

I'd like feedback on the real-time driver change, for possible
consideration into adding this to higan as well.

Some drivers just crash, it's a fact of life. The ASIO driver in
particular likes to crash inside the driver itself, without any error
messages ever returned to try and catch.

When you try to change a driver with a game loaded, it gives you a scary
warning, asking if you want to proceed.

When you change a driver, it sets a crash flag, and if the driver
crashes while initializing, then restarting bsnes will disable the
errant driver. If it fails in a recoverable way, then it sets the driver
to “None” and warns you that the driver cannot be used.

What I'm thinking of further adding is to call emulator→save() to
write out the save RAM contents beforehand (although the periodic
auto-saving RAM will handle this anyway when it's enabled), and possibly
it might be wise to capture an emulator save state, although those can't
be taken without advancing the emulator to the next frame, so that might
not be a good idea.

I'm also thinking we should show some kind of message somewhere when a
driver is set to “None”. The status bar can be hidden, so perhaps on the
title bar? Or maybe just a warning on startup that a driver is set to
“None”.
2018-05-25 18:02:38 +10:00
Tim Allen 2f81b5a3e7 Update to v106r2 release.
byuu says:

Changelog:

  - Super Famicom: added support for loading manifests without embedded
    mapping information¹
  - genius: initial commit
  - various Makefile cleanups

¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.

For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.

The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.

Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.

Give it time, we'll refine this into something nicer.
2018-02-01 19:20:37 +11:00
Tim Allen 4c3f9b93e7 Update to v102r12 release.
byuu says:

Changelog:

  - MD/PSG: fixed 68K bus Z80 status read address location
  - MS, GG, MD/PSG: channels post-decrement their counters, not
    pre-decrement [Cydrak]¹
  - MD/VDP: cache screen width registers once per scanline; screen
    height registers once per frame
  - MD/VDP: support 256-width display mode (used in Shining Force, etc)
  - MD/YM2612: implemented timers²
  - MD/YM2612: implemented 8-bit PCM DAC²
  - 68000: TRAP instruction should index the vector location by 32 (eg
    by 128 bytes), fixes Shining Force
  - nall: updated hex(), octal(), binary() functions to take uintmax
    instead of template<typename T> parameter³

¹: this one makes an incredible difference. Sie noticed that lots of
games set a period of 0, which would end up being a really long period
with pre-decrement. By fixing this, noise shows up in many more games,
and sounds way better in games even where it did before. You can hear
extra sound on Lunar - Sanposuru Gakuen's title screen, the noise in
Sonic The Hedgehog (Mega Drive) sounds better, etc.

²: this also really helps sound. The timers allow PSG music to play
back at the correct speed instead of playing back way too quickly. And
the PCM DAC lets you hear a lot of drum effects, as well as the
"Sega!!" sound at the start of Sonic the Hedgehog, and the infamous,
"Rise from your grave!" line from Altered Beast.

Still, most music on the Mega Drive comes from the FM channels, so
there's still not a whole lot to listen to.

I didn't implement Cydrak's $02c test register just yet. Sie wasn't 100%
certain on how the extended DAC bit worked, so I'd like to play it a
little conservative and get sound working, then I'll go back and add a
toggle or something to enable undocumented registers, that way we can
use that to detect any potential problems they might be causing.

³: unfortunately we lose support for using hex() on nall/arithmetic
types. If I have a const Pair& version of the function, then the
compiler gets confused on whether Natural<32> should use uintmax or
const Pair&, because compilers are stupid, and you can't have explicit
arguments in overloaded functions. So even though either function would
work, it just decides to error out instead >_>

This is actually really annoying, because I want hex() to be useful for
printing out nall/crypto keys and hashes directly.

But ... this change had to be made. Negative signed integers would crash
programs, and that was taking out my 68000 disassembler.
2017-02-27 19:45:51 +11:00
Tim Allen f3e67da937 Update to v101r19 release.
byuu says:

Changelog:

-   added \~130 new PAL games to icarus (courtesy of Smarthuman
    and aquaman)
-   added all three Korean-localized games to icarus
-   sfc: removed SuperDisc emulation (it was going nowhere)
-   sfc: fixed MSU1 regression where the play/repeat flags were not
    being cleared on track select
-   nall: cryptography support added; will be used to sign future
    databases (validation will always be optional)
-   minor shims to fix compilation issues due to nall changes

The real magic is that we now have 25-30% of the PAL SNES library in
icarus!

Signing will be tricky. Obviously if I put the public key inside the
higan archive, then all anyone has to do is change that public key for
their own releases. And if you download from my site (which is now over
HTTPS), then you don't need the signing to verify integrity. I may just
put the public key on my site on my site and leave it at that, we'll
see.
2016-10-28 08:16:58 +11:00
Tim Allen c6fc15f8d2 Update to v101r18 release.
byuu says:

Changelog:

  - added 30 new PAL games to icarus (courtesy of Mikerochip)
  - new version of libco no longer requires mprotect nor W|X permissions
  - nall: default C compiler to -std=c11 instead of -std=c99
  - nall: use `-fno-strict-aliasing` during compilation
  - updated nall/certificates (hopefully for the last time)
  - updated nall/http to newer coding conventions
  - nall: improve handling of range() function

I didn't really work on higan at all, this is mostly just a release
because lots of other things have changed.

The most interesting is `-fno-strict-aliasing` ... basically, it joins
`-fwrapv` as being "stop the GCC developers from doing *really* evil
shit that could lead to security vulnerabilities or instabilities."

For the most part, it's a ~2% speed penalty for higan. Except for the
Sega Genesis, where it's a ~10% speedup. I have no idea how that's
possible, but clearly something's going very wrong with strict aliasing
on the Genesis core.

So ... it is what it is. If you need the performance for the non-Genesis
cores, you can turn it off in your builds. But I'm getting quite sick of
C++'s "surprises" and clever compiler developers, so I'm keeping it on
in all of my software going forward.
2016-09-14 21:55:53 +10:00
Tim Allen 0a57cac70c Update to v101r02 release.
byuu says:

Changelog:

  - Emulator: use `(uintmax)-1 >> 1` for the units of time
  - MD: implemented 13 new 68K instructions (basically all of the
    remaining easy ones); 21 remain
  - nall: replaced `(u)intmax_t` (64-bit) with *actual* `(u)intmax` type
    (128-bit where available)
      - this extends to everything: atoi, string, etc. You can even
        print 128-bit variables if you like

22,552 opcodes still don't exist in the 68K map. Looking like quite a
few entries will be blank once I finish.
2016-08-09 21:07:18 +10:00
Tim Allen f5e5bf1772 Update to v100r16 release.
byuu says:

(Windows users may need to include <sys/time.h> at the top of
nall/chrono.hpp, not sure.)

Unchangelog:
- forgot to add the Scheduler clock=0 fix because I have the memory of
  a goldfish

Changelog:
- new icarus database with nine additional games
- hiro(GTK,Qt) won't constantly write its settings.bml file to disk
  anymore
- added latency simulator for fun (settings.bml => Input/Latency in
  milliseconds)

So the last one ... I wanted to test out nall::chrono, and I was also
thinking that by polling every emulated frame, it's pretty wasteful when
you are using Fast Forward and hitting 200+fps. As I've said before,
calls to ruby::input::poll are not cheap.

So to get around this, I added a limiter so that if you called the
hardware poll function within N milliseconds, it'll return without
doing any actual work. And indeed, that increases my framerate of Zelda
3 uncapped from 133fps to 142fps. Yay. But it's not a "real" speedup,
as it only helps you when you exceed 100% speed (theoretically, you'd
need to crack 300% speed since the game itself will poll at 16ms at 100%
speed, but yet it sped up Zelda 3, so who am I to complain?)

I threw the latency value into the settings file. It should be 16,
but I set it to 5 since that was the lowest before it started negatively
impacting uncapped speeds. You're wasting your time and CPU cycles setting
it lower than 5, but if people like placebo effects it might work. Maybe
I should let it be a signed integer so people can set it to -16 and think
it's actually faster :P (I'm only joking. I took out the 96000hz audio
placebo effect as well. Not really into psychological tricks anymore.)

But yeah seriously, I didn't do this to start this discussion again for
the billionth time. Please don't go there. And please don't tell me this
WIP has higher/lower latency than before. I don't want to hear it.

The only reason I bring it up is for the fun part that is worth
discussing: put up or shut up time on how sensitive you are to
latency! You can set the value above 5 to see how games feel.

I personally can't really tell a difference until about 50. And I can't
be 100% confident it's worse until about 75. But ... when I set it to
150, games become "extra difficult" ... the higher it goes, the worse
it gets :D

For this WIP, I've left no upper limit cap. I'll probably set a cap of
something like 500ms or 1000ms for the official release. Need to balance
user error/trolling with enjoyability. I'll think about it.

[...]

Now, what I worry about is stupid people seeing it and thinking it's an
"added latency" setting, as if anyone would intentionally make things
worse by default. This is a limiter. So if 5ms have passed since the
game last polled, and that will be the case 99.9% of the time in games,
the next poll will happen just in time, immediately when the game polls
the inputs. Thus, a value below 1/<framerate>ms is not only pointless,
if you go too low it will ruin your fast forward max speeds.

I did say I didn't want to resort to placebo tricks, but I also don't
want to spark up public discussion on this again either. So it might
be best to default Input/Latency to 0ms, and internally have a max(5,
latency) wrapper around the value.
2016-08-03 22:32:40 +10:00
Tim Allen ca277cd5e8 Update to v100r14 release.
byuu says:

(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)

I completely replaced the time management system in higan and overhauled
the scheduler.

Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.

The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.

The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:

    auto SMP::step(uint clocks) -> void {
      clock += clocks * (uint64)cpu.frequency;
      dsp.clock -= clocks;
      if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
      if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
    }

To this:

    auto SMP::step(uint clocks) -> void {
      Thread::step(clocks);
      synchronize(dsp);
      synchronize(cpu);
    }

As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.

Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.

Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.

Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.

----

Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.

The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.

----

EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
2016-07-30 13:56:12 +10:00
Tim Allen 13ad9644a2 Update to v099r16 release (public beta).
byuu says:

Changelog:
- hiro: BrowserDialog can navigate up to drive selection on Windows
- nall: (file,path,dir,base,prefix,suffix)name =>
  Location::(file,path,dir,base,prefix,suffix)
- higan/tomoko: rename audio filter label from "Sinc" to "IIR - Biquad"
- higan/tomoko: allow loading files via icarus on the command-line
  once again
- higan/tomoko: (begrudging) quick hack to fix presentation window focus
  on startup
- higan/audio: don't divide output audio volume by number of streams
- processor/r65816: fix a regression in (read,write)DB; fixes Taz-Mania
- fixed compilation regressions on Windows and Linux

I'm happy with where we are at with code cleanups and stability, so I'd
like to release v100. But even though I'm not assigning any special
significance to this version, we should probably test it more thoroughly
first.
2016-07-04 21:53:24 +10:00
Tim Allen 8d5cc0c35e Update to v099r15 release.
byuu says:

Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
  - but they're now optimized to the realities of the PPU (16-bit data
    sizes / no address parameter / where appropriate)
  - basically used to get the active-display overrides in a unified place;
    but also reduces duplicate code in (read,write)IO
2016-07-04 21:48:17 +10:00
Tim Allen 82293c95ae Update to v099r14 release.
byuu says:

Changelog:
- (u)int(max,ptr) abbreviations removed; use _t suffix now [didn't feel
  like they were contributing enough to be worth it]
- cleaned up nall::integer,natural,real functionality
  - toInteger, toNatural, toReal for parsing strings to numbers
  - fromInteger, fromNatural, fromReal for creating strings from numbers
  - (string,Markup::Node,SQL-based-classes)::(integer,natural,real)
    left unchanged
  - template<typename T> numeral(T value, long padding, char padchar)
    -> string for print() formatting
    - deduces integer,natural,real based on T ... cast the value if you
      want to override
    - there still exists binary,octal,hex,pointer for explicit print()
      formatting
- lstring -> string_vector [but using lstring = string_vector; is
  declared]
  - would be nice to remove the using lstring eventually ... but that'd
    probably require 10,000 lines of changes >_>
- format -> string_format [no using here; format was too ambiguous]
- using integer = Integer<sizeof(int)*8>; and using natural =
  Natural<sizeof(uint)*8>; declared
  - for consistency with boolean. These three are meant for creating
    zero-initialized values implicitly (various uses)
- R65816::io() -> idle() and SPC700::io() -> idle() [more clear; frees
  up struct IO {} io; naming]
- SFC CPU, PPU, SMP use struct IO {} io; over struct (Status,Registers) {}
  (status,registers); now
  - still some CPU::Status status values ... they didn't really fit into
    IO functionality ... will have to think about this more
- SFC CPU, PPU, SMP now use step() exclusively instead of addClocks()
  calling into step()
- SFC CPU joypad1_bits, joypad2_bits were unused; killed them
- SFC PPU CGRAM moved into PPU::Screen; since nothing else uses it
- SFC PPU OAM moved into PPU::Object; since nothing else uses it
  - the raw uint8[544] array is gone. OAM::read() constructs values from
    the OAM::Object[512] table now
  - this avoids having to determine how we want to sub-divide the two
    OAM memory sections
  - this also eliminates the OAM::synchronize() functionality
- probably more I'm forgetting

The FPS fluctuations are driving me insane. This WIP went from 128fps to
137fps. Settled on 133.5fps for the final build. But nothing I changed
should have affected performance at all. This level of fluctuation makes
it damn near impossible to know whether I'm speeding things up or slowing
things down with changes.
2016-07-01 21:50:32 +10:00
Tim Allen 3ebc77c148 Update to v098r10 release.
byuu says:

Changelog:
- synchronized tomoko, loki, icarus with extensive changes to nall
  (118KiB diff)
2016-05-16 19:51:12 +10:00
Tim Allen 0955295475 Update to v098r08 release.
byuu says:

Changelog:
- nall/vector rewritten from scratch
- higan/audio uses nall/vector instead of raw pointers
- higan/sfc/coprocessor/sdd1 updated with new research information
- ruby/video/glx and ruby/video/glx2: fuck salt glXSwapIntervalEXT!

The big change here is definitely nall/vector. The Windows, OS X and Qt
ports won't compile until you change some first/last strings to
left/right, but GTK will compile.

I'd be really grateful if anyone could stress-test nall/vector. Pretty
much everything I do relies on this class. If we introduce a bug, the
worst case scenario is my entire SFC game dump database gets corrupted,
or the byuu.org server gets compromised. So it's really critical that we
test the hell out of this right now.

The S-DD1 changes mean you need to update your installation of icarus
again. Also, even though the Lunar FMV never really worked on the
accuracy core anyway (it didn't initialize the PPU properly), it really
won't work now that we emulate the hard-limit of 16MiB for S-DD1 games.
2016-05-02 19:57:04 +10:00
Tim Allen 0b923489dd Update to 20160106 OS X Preview for Developers release.
byuu says:

New update. Most of the work today went into eliminating hiro::Image
from all objects in all ports, replacing with nall::image. That took an
eternity.

Changelog:
- fixed crashing bug when loading games [thanks endrift!!]
- toggling "show status bar" option adjusts window geometry (not
  supposed to recenter the window, though)
- button sizes improved; icon-only button icons no longer being cut off
2016-01-07 19:17:15 +11:00
Tim Allen 78d49d3873 Update to v095r10 release.
byuu says:

Changelog:

- int_t<bits> replaced with Integer<bits>
- uint_t<bits> replaced with Natural<bits>
- fixed "Synchronize Audio" menu option that broke recently
- all of sfc/performance ported to "auto function() -> return;" syntax

With this WIP, all of higan is finally ported over to the new function
declaration syntax. Thank the gods.

There's still going to be periodic disruption for diffs from porting
over signed->int, unsigned->uint, and whatever we come up with for the
new Natural<> and Integer<> classes. But the worst of it's behind us
now.
2015-12-07 08:11:41 +11:00
Tim Allen 483fc81356 Update to v094r44 release.
byuu says:

Changelog:
- return open bus instead of mirroring addresses on the bus (fixes
  Mario&Luigi, Minish Cap, etc) [Jonas Quinn]
- add boolean flag to load requests for slotted game carts (fixes slot
  load prompts)
- rename BS-X Town cart from psram to ram
- icarus: add support for game database

Note: I didn't rename "bsx" to "mcc" in the database for icarus before
uploading that. But I just fixed it locally, so it'll be in the next
WIP. For now, make it create the manifest for you and then rename it
yourself. I did fix the PSRAM size to 256kbit.
2015-10-01 20:00:28 +10:00
Tim Allen 1b0b54a690 Update to v094r38 release.
byuu says:

I'll post more detailed changes later, but basically:
- fixed Baldur's Gate bug
- guess if no flash ROM ID present (fixes Magical Vacation, many many
  others)
- nall cleanups
- sfc/cartridge major cleanups
- bsxcartridge/"bsx" renamed to mcc/"mcc" after the logic chip it uses
  (consistency with SGB/ICD2)
- ... and more!
2015-08-04 19:01:59 +10:00
Tim Allen 4e0223d590 Update to v094r20 release.
byuu says:

Main reason for this WIP was because of all the added lines to hiro for
selective component disabling. May as well get all the diff-noise apart
from code changes.

It also merges something I've been talking to Cydrak about ... making
nall::string::(integer,decimal) do built-in binary,octal,hex decoding
instead of just failing on those. This will have fun little side effects
all over the place, like being able to view a topic on my forum via
"forum.byuu.org/topic/0b10010110", heh.

There are two small changes to higan itself, though. First up, I fixed
the resampler ratio when loading non-SNES games. Tested and I can play
Game Boy games fine now. Second, I hooked up menu option hiding for
reset and controller selection. Right now, this works like higan v094,
but I'm thinking I might want to show the "Device -> Controller" even if
that's all that's there. It kind of jives nicer with the input settings
window to see the labels there, I think. And if we ever do add more
stuff, it'll be nice that people already always expect that menu there.

Remaining issues:
* add slotted cart loader (SGB, BSX, ST)
* add DIP switch selection window (NSS)
* add timing configuration (video/audio sync)
2015-05-23 15:37:08 +10:00
Tim Allen 39ca8a2fab Update to v094r17 release.
byuu says:

This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.

I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.

I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.

That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
2015-05-16 17:36:22 +10:00
Tim Allen a512d14628 Update to v094r09 release.
byuu says:

This will easily be the biggest diff in the history of higan. And not in
a good way.

* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)

For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.

Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.

Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.

My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-28 12:52:53 +11:00
Tim Allen 4e2eb23835 Update to v093 release.
byuu says:

Changelog:
- added Cocoa target: higan can now be compiled for OS X Lion
  [Cydrak, byuu]
- SNES/accuracy profile hires color blending improvements - fixes
  Marvelous text [AWJ]
- fixed a slight bug in SNES/SA-1 VBR support caused by a typo
- added support for multi-pass shaders that can load external textures
  (requires OpenGL 3.2+)
- added game library path (used by ananke->Import Game) to
  Settings->Advanced
- system profiles, shaders and cheats database can be stored in "all
  users" shared folders now (eg /usr/share on Linux)
- all configuration files are in BML format now, instead of XML (much
  easier to read and edit this way)
- main window supports drag-and-drop of game folders (but not game files
  / ZIP archives)
- audio buffer clears when entering a modal loop on Windows (prevents
  audio repetition with DirectSound driver)
- a substantial amount of code clean-up (probably the biggest
  refactoring to date)

One highly desired target for this release was to default to the optimal
drivers instead of the safest drivers, but because AMD drivers don't
seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD
has too big a market share. Hopefully with v093 officially released, we
can get some public input on what AMD doesn't like.
2013-08-18 13:21:14 +10:00
Tim Allen a59ecb3dd4 Include all the code from the bsnes v068 tarball.
byuu describes the changes since v067:

This release officially introduces the accuracy and performance cores,
alongside the previously-existing compatibility core. The accuracy core
allows the most accurate SNES emulation ever seen, with every last
processor running at the lowest possible clock synchronization level.
The performance core allows slower computers the chance to finally use
bsnes. It is capable of attaining 60fps in standard games even on an
entry-level Intel Atom processor, commonly found in netbooks.

The accuracy core is absolutely not meant for casual gaming at all. It
is meant solely for getting as close to 100% perfection as possible, no
matter the cost to speed. It should only be used for testing,
development or debugging.

The compatibility core is identical to bsnes v067 and earlier, but is
now roughly 10% faster. This is the default and recommended core for
casual gaming.

The performance core contains an entirely new S-CPU core, with
range-tested IRQs; and uses blargg's heavily-optimized S-DSP core
directly. Although there are very minor accuracy tradeoffs to increase
speed, I am confident that the performance core is still more accurate
and compatible than any other SNES emulator. The S-CPU, S-SMP, S-DSP,
SuperFX and SA-1 processors are all clock-based, just as in the accuracy
and compatibility cores; and as always, there are zero game-specific
hacks. Its compatibility is still well above 99%, running even the most
challenging games flawlessly.

If you have held off from using bsnes in the past due to its system
requirements, please give the performance core a try. I think you will
be impressed. I'm also not finished: I believe performance can be
increased even further.

I would also strongly suggest Windows Vista and Windows 7 users to take
advantage of the new XAudio2 driver by OV2. Not only does it give you
a performance boost, it also lowers latency and provides better sound by
way of skipping an API emulation layer.

Changelog:
- Split core into three profiles: accuracy, compatibility and
  performance
- Accuracy core now takes advantage of variable-bitlength integers (eg
  uint24_t)
- Performance core uses a new S-CPU core, written from scratch for speed
- Performance core uses blargg's snes_dsp library for S-DSP emulation
- Binaries are now compiled using GCC 4.5
- Added a workaround in the SA-1 core for a bug in GCC 4.5+
- The clock-based S-PPU renderer has greatly improved OAM emulation;
  fixing Winter Gold and Megalomania rendering issues
- Corrected pseudo-hires color math in the clock-based S-PPU renderer;
  fixing Super Buster Bros backgrounds
- Fixed a clamping bug in the Cx4 16-bit triangle operation [Jonas
  Quinn]; fixing Mega Man X2 "gained weapon" star background effect
- Updated video renderer to properly handle mixed-resolution screens
  with interlace enabled; fixing Air Strike Patrol level briefing screen
- Added mightymo's 2010-08-19 cheat code pack
- Windows port: added XAudio2 output support [OV2]
- Source: major code restructuring; virtual base classes for processor
- cores removed, build system heavily modified, etc.
2010-10-20 22:30:34 +11:00
Tim Allen 165f1e74b5 First version split into asnes and bsnes. 2010-08-09 23:28:56 +10:00