Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
2016-07-30 03:56:12 +00:00
|
|
|
struct SharpRTC : Thread {
|
2015-11-14 00:52:51 +00:00
|
|
|
static auto Enter() -> void;
|
2016-02-09 11:51:12 +00:00
|
|
|
auto main() -> void;
|
Update to v074r11 release.
byuu says:
Changelog:
- debugger compiles on all three profiles
- libsnes compiles on all three platforms (no API changes to libsnes)
- memory.cpp : namespace memory removed (wram -> cpu, apuram -> smp,
vram, oam, cgram -> ppu)
- sa1.cpp : namespace memory removed (SA-1 specific functions merged
inline to SA1::bus_read,write)
- GameBoy: added serial link support with interrupts and proper 8192hz
timing, but obviously it acts as if no other GB is connected to it
- GameBoy: added STAT OAM interrupt, and better STAT d1,d0 mode values
- UI: since Qt is dead, I've renamed the config files back to bsnes.cfg
and bsnes-geometry.cfg
- SA1: IRAM was not syncing to CPU on SA-1 side
- PPU/Accuracy and PPU/Performance needed Sprite oam renamed to Sprite
sprite; so that I could add uint8 oam[544]
- makes more sense anyway, OAM = object attribute memory, obj or
sprite are better names for Sprite rendering class
- more cleanup
2011-01-24 09:03:17 +00:00
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
auto init() -> void;
|
|
|
|
auto load() -> void;
|
|
|
|
auto unload() -> void;
|
|
|
|
auto power() -> void;
|
|
|
|
auto sync() -> void;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-02-16 09:32:49 +00:00
|
|
|
auto read(uint24 addr, uint8 data) -> uint8;
|
|
|
|
auto write(uint24 addr, uint8 data) -> void;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
auto serialize(serializer&) -> void;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
enum class State : uint { Ready, Command, Read, Write } state;
|
|
|
|
int index;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
uint second;
|
|
|
|
uint minute;
|
|
|
|
uint hour;
|
|
|
|
uint day;
|
|
|
|
uint month;
|
|
|
|
uint year;
|
|
|
|
uint weekday;
|
2012-05-23 11:27:45 +00:00
|
|
|
|
|
|
|
//memory.cpp
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto rtcRead(uint4 addr) -> uint4;
|
|
|
|
auto rtcWrite(uint4 addr, uint4 data) -> void;
|
2012-05-23 11:27:45 +00:00
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
auto load(const uint8* data) -> void;
|
|
|
|
auto save(uint8* data) -> void;
|
2012-05-23 11:27:45 +00:00
|
|
|
|
|
|
|
//time.cpp
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
static const uint daysInMonth[12];
|
|
|
|
auto tickSecond() -> void;
|
|
|
|
auto tickMinute() -> void;
|
|
|
|
auto tickHour() -> void;
|
|
|
|
auto tickDay() -> void;
|
|
|
|
auto tickMonth() -> void;
|
|
|
|
auto tickYear() -> void;
|
|
|
|
|
|
|
|
auto calculateWeekday(uint year, uint month, uint day) -> uint;
|
2010-08-09 13:28:56 +00:00
|
|
|
};
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
extern SharpRTC sharprtc;
|