Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::read(uint24 addr) -> uint8 {
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
if((addr & 0x40ec00) == 0x006c00) { //$00-3f,80-bf:6c00-6cff,7c00-7cff
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
return dspRead(addr, 0x00);
|
2015-12-15 09:30:26 +00:00
|
|
|
}
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
if((addr & 0x40e000) == 0x006000) { //$00-3f,80-bf:6000-6bff,7000-7bff
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
return dramRead(addr, 0x00);
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
}
|
2015-12-15 09:30:26 +00:00
|
|
|
if((addr & 0x408000) == 0x008000) { //$00-3f,80-bf:8000-ffff
|
|
|
|
|
if(rom.size() == 0) return 0x00;
|
|
|
|
|
addr = ((addr & 0x3f0000) >> 1) | (addr & 0x7fff);
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
addr = Bus::mirror(addr, rom.size());
|
2015-12-15 09:30:26 +00:00
|
|
|
return rom.read(addr, 0);
|
|
|
|
|
}
|
|
|
|
|
if((addr & 0xf88000) == 0x700000) { //$70-77:0000-7fff
|
|
|
|
|
if(ram.size() == 0) return 0x00;
|
|
|
|
|
addr = ((addr & 0x070000) >> 1) | (addr & 0x7fff);
|
|
|
|
|
addr = Bus::mirror(addr, ram.size());
|
|
|
|
|
return ram.read(addr);
|
|
|
|
|
}
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
return 0x00;
|
|
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::write(uint24 addr, uint8 data) -> void {
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
if((addr & 0x40ec00) == 0x006c00) { //$00-3f,80-bf:6c00-6fff,7c00-7fff
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
return dspWrite(addr, data);
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
}
|
|
|
|
|
if((addr & 0x40e000) == 0x006000) { //$00-3f,80-bf:6000-6bff,7000-7bff
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
return dramWrite(addr, data);
|
2015-12-15 09:30:26 +00:00
|
|
|
}
|
|
|
|
|
if((addr & 0xf88000) == 0x700000) { //$70-77:0000-7fff
|
|
|
|
|
if(ram.size() == 0) return;
|
|
|
|
|
addr = ((addr & 0x070000) >> 1) | (addr & 0x7fff);
|
|
|
|
|
addr = Bus::mirror(addr, ram.size());
|
|
|
|
|
return ram.write(addr, data);
|
|
|
|
|
}
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::romRead(uint24 addr, uint8 data) -> uint8 {
|
Update to v100r15 release.
byuu wrote:
Aforementioned scheduler changes added. Longer explanation of why here:
http://hastebin.com/raw/toxedenece
Again, we really need to test this as thoroughly as possible for
regressions :/
This is a really major change that affects absolutely everything: all
emulation cores, all coprocessors, etc.
Also added ADDX and SUB to the 68K core, which brings us just barely
above 50% of the instruction encoding space completed.
[Editor's note: The "aformentioned scheduler changes" were described in
a previous forum post:
Unfortunately, 64-bits just wasn't enough precision (we were
getting misalignments ~230 times a second on 21/24MHz clocks), so
I had to move to 128-bit counters. This of course doesn't exist on
32-bit architectures (and probably not on all 64-bit ones either),
so for now ... higan's only going to compile on 64-bit machines
until we figure something out. Maybe we offer a "lower precision"
fallback for machines that lack uint128_t or something. Using the
booth algorithm would be way too slow.
Anyway, the precision is now 2^-96, which is roughly 10^-29. That
puts us far beyond the yoctosecond. Suck it, MAME :P I'm jokingly
referring to it as the byuusecond. The other 32-bits of precision
allows a 1Hz clock to run up to one full second before all clocks
need to be normalized to prevent overflow.
I fixed a serious wobbling issue where I was using clock > other.clock
for synchronization instead of clock >= other.clock; and also another
aliasing issue when two threads share a common frequency, but don't
run in lock-step. The latter I don't even fully understand, but I
did observe it in testing.
nall/serialization.hpp has been extended to support 128-bit integers,
but without explicitly naming them (yay generic code), so nall will
still compile on 32-bit platforms for all other applications.
Speed is basically a wash now. FC's a bit slower, SFC's a bit faster.
The "longer explanation" in the linked hastebin is:
Okay, so the idea is that we can have an arbitrary number of
oscillators. Take the SNES:
- CPU/PPU clock = 21477272.727272hz
- SMP/DSP clock = 24576000hz
- Cartridge DSP1 clock = 8000000hz
- Cartridge MSU1 clock = 44100hz
- Controller Port 1 modem controller clock = 57600hz
- Controller Port 2 barcode battler clock = 115200hz
- Expansion Port exercise bike clock = 192000hz
Is this a pathological case? Of course it is, but it's possible. The
first four do exist in the wild already: see Rockman X2 MSU1
patch. Manifest files with higan let you specify any frequency you
want for any component.
The old trick higan used was to hold an int64 counter for each
thread:thread synchronization, and adjust it like so:
- if thread A steps X clocks; then clock += X * threadB.frequency
- if clock >= 0; switch to threadB
- if thread B steps X clocks; then clock -= X * threadA.frequency
- if clock < 0; switch to threadA
But there are also system configurations where one processor has to
synchronize with more than one other processor. Take the Genesis:
- the 68K has to sync with the Z80 and PSG and YM2612 and VDP
- the Z80 has to sync with the 68K and PSG and YM2612
- the PSG has to sync with the 68K and Z80 and YM2612
Now I could do this by having an int64 clock value for every
association. But these clock values would have to be outside the
individual Thread class objects, and we would have to update every
relationship's clock value. So the 68K would have to update the Z80,
PSG, YM2612 and VDP clocks. That's four expensive 64-bit multiply-adds
per clock step event instead of one.
As such, we have to account for both possibilities. The only way to
do this is with a single time base. We do this like so:
- setup: scalar = timeBase / frequency
- step: clock += scalar * clocks
Once per second, we look at every thread, find the smallest clock
value. Then subtract that value from all threads. This prevents the
clock counters from overflowing.
Unfortunately, these oscillator values are psychotic, unpredictable,
and often times repeating fractions. Even with a timeBase of
1,000,000,000,000,000,000 (one attosecond); we get rounding errors
every ~16,300 synchronizations. Specifically, this happens with a CPU
running at 21477273hz (rounded) and SMP running at 24576000hz. That
may be good enough for most emulators, but ... you know how I am.
Plus, even at the attosecond level, we're really pushing against the
limits of 64-bit integers. Given the reciprocal inverse, a frequency
of 1Hz (which does exist in higan!) would have a scalar that consumes
1/18th of the entire range of a uint64 on every single step. Yes, I
could raise the frequency, and then step by that amount, I know. But
I don't want to have weird gotchas like that in the scheduler core.
Until I increase the accuracy to about 100 times greater than a
yoctosecond, the rounding errors are too great. And since the only
choice above 64-bit values is 128-bit values; we might as well use
all the extra headroom. 2^-96 as a timebase gives me the ability to
have both a 1Hz and 4GHz clock; and run them both for a full second;
before an overflow event would occur.
Another hastebin includes demonstration code:
#include <libco/libco.h>
#include <nall/nall.hpp>
using namespace nall;
//
cothread_t mainThread = nullptr;
const uint iterations = 100'000'000;
const uint cpuFreq = 21477272.727272 + 0.5;
const uint smpFreq = 24576000.000000 + 0.5;
const uint cpuStep = 4;
const uint smpStep = 5;
//
struct ThreadA {
cothread_t handle = nullptr;
uint64 frequency = 0;
int64 clock = 0;
auto create(auto (*entrypoint)() -> void, uint frequency) {
this->handle = co_create(65536, entrypoint);
this->frequency = frequency;
this->clock = 0;
}
};
struct CPUA : ThreadA {
static auto Enter() -> void;
auto main() -> void;
CPUA() { create(&CPUA::Enter, cpuFreq); }
} cpuA;
struct SMPA : ThreadA {
static auto Enter() -> void;
auto main() -> void;
SMPA() { create(&SMPA::Enter, smpFreq); }
} smpA;
uint8 queueA[iterations];
uint offsetA;
cothread_t resumeA = cpuA.handle;
auto EnterA() -> void {
offsetA = 0;
co_switch(resumeA);
}
auto QueueA(uint value) -> void {
queueA[offsetA++] = value;
if(offsetA >= iterations) {
resumeA = co_active();
co_switch(mainThread);
}
}
auto CPUA::Enter() -> void { while(true) cpuA.main(); }
auto CPUA::main() -> void {
QueueA(1);
smpA.clock -= cpuStep * smpA.frequency;
if(smpA.clock < 0) co_switch(smpA.handle);
}
auto SMPA::Enter() -> void { while(true) smpA.main(); }
auto SMPA::main() -> void {
QueueA(2);
smpA.clock += smpStep * cpuA.frequency;
if(smpA.clock >= 0) co_switch(cpuA.handle);
}
//
struct ThreadB {
cothread_t handle = nullptr;
uint128_t scalar = 0;
uint128_t clock = 0;
auto print128(uint128_t value) {
string s;
while(value) {
s.append((char)('0' + value % 10));
value /= 10;
}
s.reverse();
print(s, "\n");
}
//femtosecond (10^15) = 16306
//attosecond (10^18) = 688838
//zeptosecond (10^21) = 13712691
//yoctosecond (10^24) = 13712691 (hitting a dead-end on a rounding error causing a wobble)
//byuusecond? ( 2^96) = (perfect? 79,228 times more precise than a yoctosecond)
auto create(auto (*entrypoint)() -> void, uint128_t frequency) {
this->handle = co_create(65536, entrypoint);
uint128_t unitOfTime = 1;
//for(uint n : range(29)) unitOfTime *= 10;
unitOfTime <<= 96; //2^96 time units ...
this->scalar = unitOfTime / frequency;
print128(this->scalar);
this->clock = 0;
}
auto step(uint128_t clocks) -> void { clock += clocks * scalar; }
auto synchronize(ThreadB& thread) -> void { if(clock >= thread.clock) co_switch(thread.handle); }
};
struct CPUB : ThreadB {
static auto Enter() -> void;
auto main() -> void;
CPUB() { create(&CPUB::Enter, cpuFreq); }
} cpuB;
struct SMPB : ThreadB {
static auto Enter() -> void;
auto main() -> void;
SMPB() { create(&SMPB::Enter, smpFreq); clock = 1; }
} smpB;
auto correct() -> void {
auto minimum = min(cpuB.clock, smpB.clock);
cpuB.clock -= minimum;
smpB.clock -= minimum;
}
uint8 queueB[iterations];
uint offsetB;
cothread_t resumeB = cpuB.handle;
auto EnterB() -> void {
correct();
offsetB = 0;
co_switch(resumeB);
}
auto QueueB(uint value) -> void {
queueB[offsetB++] = value;
if(offsetB >= iterations) {
resumeB = co_active();
co_switch(mainThread);
}
}
auto CPUB::Enter() -> void { while(true) cpuB.main(); }
auto CPUB::main() -> void {
QueueB(1);
step(cpuStep);
synchronize(smpB);
}
auto SMPB::Enter() -> void { while(true) smpB.main(); }
auto SMPB::main() -> void {
QueueB(2);
step(smpStep);
synchronize(cpuB);
}
//
#include <nall/main.hpp>
auto nall::main(string_vector) -> void {
mainThread = co_active();
uint masterCounter = 0;
while(true) {
print(masterCounter++, " ...\n");
auto A = clock();
EnterA();
auto B = clock();
print((double)(B - A) / CLOCKS_PER_SEC, "s\n");
auto C = clock();
EnterB();
auto D = clock();
print((double)(D - C) / CLOCKS_PER_SEC, "s\n");
for(uint n : range(iterations)) {
if(queueA[n] != queueB[n]) return print("fail at ", n, "\n");
}
}
}
...and that's everything.]
2016-07-31 02:11:20 +00:00
|
|
|
if(hitachidsp.active() || regs.halt) {
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
addr = Bus::mirror(addr, rom.size());
|
2012-11-22 10:28:01 +00:00
|
|
|
//if(Roms == 2 && mmio.r1f52 == 1 && addr >= (bit::round(rom.size()) >> 1)) return 0x00;
|
2015-12-14 09:41:06 +00:00
|
|
|
return rom.read(addr, data);
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
2012-11-22 10:28:01 +00:00
|
|
|
if((addr & 0x40ffe0) == 0x00ffe0) return mmio.vector[addr & 0x1f];
|
2015-12-14 09:41:06 +00:00
|
|
|
return data;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::romWrite(uint24 addr, uint8 data) -> void {
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::ramRead(uint24 addr, uint8 data) -> uint8 {
|
2012-11-22 10:28:01 +00:00
|
|
|
if(ram.size() == 0) return 0x00; //not open bus
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
return ram.read(Bus::mirror(addr, ram.size()), data);
|
2012-11-22 10:28:01 +00:00
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::ramWrite(uint24 addr, uint8 data) -> void {
|
2012-11-22 10:28:01 +00:00
|
|
|
if(ram.size() == 0) return;
|
Update to v096r06 release.
byuu says:
This WIP finally achieves the vision I've had for icarus.
I also fixed a mapping issue with Cx4 that, oddly enough, only caused
the "2" from the Mega Man X2 title screen to disappear.
[Editor's note - "the vision for icarus" was described in a separate,
public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584
Quoting for posterity:
icarus is now a full-fledged part of higan, and will be bundled with
each higan WIP as well. This will ensure that in the future, the
exact version of icarus you need to run higan will be included right
along with it. As of this WIP, physical manifest files are now truly
and entirely optional.
From now on, you can associate your ROM image files with higan's
main binary, or drop them directly on top of it, to load and play
your games.
Furthermore, there are two new menu options that appear under the
library menu when icarus is present:
- "Load ROM File ..." => gives you a single-file selection dialog to
import (and if possible) run the game
- "Import ROM Files ..." => gives you a multi-file import dialog
with checkboxes to pull in multiple games at once
Finally, as before, icarus can generate manifest.bml files for
folders that lack them.
For people who like the game folder and library system, nothing's
changed. Keep using higan as you have been.
For people who hate it, you can now use higan like your classic
emulators. Treat the "Library->{System Name}" entries as your
"favorites" list: the games you actually play. Treat the
"Library->Load ROM" as your standard open file dialog in other
emulators. And finally, treat "Advanced->Game Library" as your save
data path for cheat codes, save states, save RAM, etc.
]
2016-01-13 10:47:45 +00:00
|
|
|
return ram.write(Bus::mirror(addr, ram.size()), data);
|
2012-11-22 10:28:01 +00:00
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::dramRead(uint24 addr, uint8 data) -> uint8 {
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
addr &= 0xfff;
|
|
|
|
|
if(addr >= 0xc00) return data;
|
|
|
|
|
return dataRAM[addr];
|
|
|
|
|
}
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::dramWrite(uint24 addr, uint8 data) -> void {
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
addr &= 0xfff;
|
|
|
|
|
if(addr >= 0xc00) return;
|
|
|
|
|
dataRAM[addr] = data;
|
|
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::dspRead(uint24 addr, uint8) -> uint8 {
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
addr = 0x7c00 | (addr & 0x03ff);
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
|
|
|
|
|
//MMIO
|
|
|
|
|
switch(addr) {
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f40: return mmio.dmaSource >> 0;
|
|
|
|
|
case 0x7f41: return mmio.dmaSource >> 8;
|
|
|
|
|
case 0x7f42: return mmio.dmaSource >> 16;
|
|
|
|
|
case 0x7f43: return mmio.dmaLength >> 0;
|
|
|
|
|
case 0x7f44: return mmio.dmaLength >> 8;
|
|
|
|
|
case 0x7f45: return mmio.dmaTarget >> 0;
|
|
|
|
|
case 0x7f46: return mmio.dmaTarget >> 8;
|
|
|
|
|
case 0x7f47: return mmio.dmaTarget >> 16;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f48: return mmio.r1f48;
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f49: return mmio.programOffset >> 0;
|
|
|
|
|
case 0x7f4a: return mmio.programOffset >> 8;
|
|
|
|
|
case 0x7f4b: return mmio.programOffset >> 16;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f4c: return mmio.r1f4c;
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f4d: return mmio.pageNumber >> 0;
|
|
|
|
|
case 0x7f4e: return mmio.pageNumber >> 8;
|
|
|
|
|
case 0x7f4f: return mmio.programCounter;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f50: return mmio.r1f50;
|
|
|
|
|
case 0x7f51: return mmio.r1f51;
|
|
|
|
|
case 0x7f52: return mmio.r1f52;
|
|
|
|
|
case 0x7f53: case 0x7f54: case 0x7f55: case 0x7f56:
|
|
|
|
|
case 0x7f57: case 0x7f58: case 0x7f59: case 0x7f5a:
|
|
|
|
|
case 0x7f5b: case 0x7f5c: case 0x7f5d: case 0x7f5e:
|
|
|
|
|
case 0x7f5f: return ((regs.halt == false) << 6) | ((regs.halt == true) << 1);
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
//Vector
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
if(addr >= 0x7f60 && addr <= 0x7f7f) {
|
Update to v087r08 release.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
|
|
|
return mmio.vector[addr & 0x1f];
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
//GPRs
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
if((addr >= 0x7f80 && addr <= 0x7faf) || (addr >= 0x7fc0 && addr <= 0x7fef)) {
|
2015-11-14 00:52:51 +00:00
|
|
|
uint index = (addr & 0x3f) / 3; //0..15
|
|
|
|
|
uint shift = ((addr & 0x3f) % 3) * 8; //0, 8, 16
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
return regs.gpr[index] >> shift;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0x00;
|
|
|
|
|
}
|
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto HitachiDSP::dspWrite(uint24 addr, uint8 data) -> void {
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
addr = 0x7c00 | (addr & 0x03ff);
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
|
|
|
|
|
//MMIO
|
|
|
|
|
switch(addr) {
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f40: mmio.dmaSource = (mmio.dmaSource & 0xffff00) | (data << 0); return;
|
|
|
|
|
case 0x7f41: mmio.dmaSource = (mmio.dmaSource & 0xff00ff) | (data << 8); return;
|
|
|
|
|
case 0x7f42: mmio.dmaSource = (mmio.dmaSource & 0x00ffff) | (data << 16); return;
|
|
|
|
|
case 0x7f43: mmio.dmaLength = (mmio.dmaLength & 0xff00) | (data << 0); return;
|
|
|
|
|
case 0x7f44: mmio.dmaLength = (mmio.dmaLength & 0x00ff) | (data << 8); return;
|
|
|
|
|
case 0x7f45: mmio.dmaTarget = (mmio.dmaTarget & 0xffff00) | (data << 0); return;
|
|
|
|
|
case 0x7f46: mmio.dmaTarget = (mmio.dmaTarget & 0xff00ff) | (data << 8); return;
|
|
|
|
|
case 0x7f47: mmio.dmaTarget = (mmio.dmaTarget & 0x00ffff) | (data << 16);
|
Update to v087r08 release.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
|
|
|
if(regs.halt) mmio.dma = true;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
return;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f48: mmio.r1f48 = data & 0x01; return;
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f49: mmio.programOffset = (mmio.programOffset & 0xffff00) | (data << 0); return;
|
|
|
|
|
case 0x7f4a: mmio.programOffset = (mmio.programOffset & 0xff00ff) | (data << 8); return;
|
|
|
|
|
case 0x7f4b: mmio.programOffset = (mmio.programOffset & 0x00ffff) | (data << 16); return;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f4c: mmio.r1f4c = data & 0x03; return;
|
2016-06-17 13:03:54 +00:00
|
|
|
case 0x7f4d: mmio.pageNumber = (mmio.pageNumber & 0x7f00) | ((data & 0xff) << 0); return;
|
|
|
|
|
case 0x7f4e: mmio.pageNumber = (mmio.pageNumber & 0x00ff) | ((data & 0x7f) << 8); return;
|
|
|
|
|
case 0x7f4f: mmio.programCounter = data;
|
Update to v087r08 release.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
|
|
|
if(regs.halt) {
|
2016-06-17 13:03:54 +00:00
|
|
|
regs.pc = mmio.pageNumber * 256 + mmio.programCounter;
|
Update to v087r08 release.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
|
|
|
regs.halt = false;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
return;
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
case 0x7f50: mmio.r1f50 = data & 0x77; return;
|
|
|
|
|
case 0x7f51: mmio.r1f51 = data & 0x01; return;
|
|
|
|
|
case 0x7f52: mmio.r1f52 = data & 0x01; return;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
//Vector
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
if(addr >= 0x7f60 && addr <= 0x7f7f) {
|
Update to v087r08 release.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
|
|
|
mmio.vector[addr & 0x1f] = data;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
//GPRs
|
Update to higan and icarus v095r15 release.
r13 and r14 weren't posted as individual releases, but their changelogs
were posted.
byuu says about r13:
I'm not going to be posting WIPs for r13 and above for a while.
The reason is that I'm working on the major manifest overhaul I've
discussed previously on the icarus subforum.
I'm recreating my boards database from scratch using the map files
and the new map analyzer. The only games that will load are ones
I've created board definitions for, and updated
sfc/cartridge/markup.cpp to parse. Once I've finished all the
boards, then I'll update the heuristics.
Then finally, I'll sync the syntax changes over to the fc, gb, gba
cores.
Once that's done, I'll start posting WIPs again, along with a new
build of icarus.
But I'll still post changelogs as I work through things.
Changelog (r13):
- preservation: created new database-builder tool (merges
region-specific databases with boards)
- icarus: support new, external database format
(~/.config/icarus/Database/(Super Famicom.bml, ...)
- added 1A3B-(10,11,12); 1A3B-20
byuu says about r14:
r14 work:
I successfully created mappings for every board used in the US set.
I also updated icarus' heuristics to use the new mappings, and
created ones there for the boards that are only in the JP set.
Then I patched icarus to support pulling games out of the database
when it's used on a game folder to generate a manifest file.
Then I updated a lot of code in higan/sfc to support the new mapping
syntax. sfc/cartridge/markup.cpp is about half the size it used to
be with the new mappings, and I was able to kill off both map/id and
map/select entirely.
Then I updated all four emulated systems (and both subsystems) to
use "board" as the root node, and harmonized their syntax (made them
all more consistent with each other.)
Then I added a manifest viewer to the tools window+menu. It's kind
of an advanced user feature, but oh well. No reason to coddle people
when the feature is very useful for developers. The viewer will show
all manifests in order when you load multi-cart games as well.
Still not going to call any syntax 100% done right now, but
thankfully with the new manifest-free folders, nobody will have to
do anything to use the new format. Just download the new version and
go.
The Super Famicom Event stuff is currently broken (CC92/PF94
boards). That's gonna be fun to support.
byuu says about r15:
EDIT: small bug in icarus with heuristics. Edit
core/super-famicom.cpp line 27:
if(/*auto*/ markup = cartridge.markup) {
Gotta remove that "auto" so that it returns valid markup.
Resolved the final concerns I had with the new manifest format.
Right now there are two things that are definitely broken: MCC (BS-X
Town cart) and Event (CC '92 and PF'94).
And there are a few things that are untested: SPC7110, EpsonRTC,
SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
|
|
|
if((addr >= 0x7f80 && addr <= 0x7faf) || (addr >= 0x7fc0 && addr <= 0x7fef)) {
|
2015-11-14 00:52:51 +00:00
|
|
|
uint index = (addr & 0x3f) / 3;
|
Update to v079r04 release.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
|
|
|
switch((addr & 0x3f) % 3) {
|
|
|
|
|
case 0: regs.gpr[index] = (regs.gpr[index] & 0xffff00) | (data << 0); return;
|
|
|
|
|
case 1: regs.gpr[index] = (regs.gpr[index] & 0xff00ff) | (data << 8); return;
|
|
|
|
|
case 2: regs.gpr[index] = (regs.gpr[index] & 0x00ffff) | (data << 16); return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|