Update to v102r23 release.
byuu says:
Changelog:
- rewrote the 6502 CPU core from scratch. Now called MOS6502,
supported BCD mode
- Famicom core disables BCD mode via MOS6502::BCD = 0;
- renamed r65816 folder to wdc65816 (still need to rename the actual
class, though ...)
Note: need to remove build rules for the now renamed r6502, r65816
objects from processor/GNUmakefile.
So this'll seem like a small WIP, but it was a solid five hours to
rewrite the entire 6502 core. The reason I wanted to do this was because
the old 6502 core was pretty sloppy. My coding style improved a lot, and
I really liked how the HuC6280 CPU core came out, so I wanted the 6502
core to be like that one.
The core can now support BCD mode, so hopefully that will prove useful
to hex\_usr and allow one core to run both the NES and his Atari 2600
cores at some point.
Note that right now, the core doesn't support any illegal instructions.
The old core supported a small number of them, but were mostly the no
operation ones. The goal is support all of the illegal instructions at
some point.
It's very possible the rewrite introduced some regressions, so thorough
testing of the NES core would be appreciated if anyone were up for it.
2017-06-11 01:51:53 +00:00
|
|
|
struct CPU : Processor::MOS6502, Thread {
|
2017-06-22 06:04:07 +00:00
|
|
|
inline auto rate() const -> uint { return Region::NTSC() ? 12 : 16; }
|
|
|
|
|
|
|
|
//cpu.cpp
|
2015-12-05 05:44:49 +00:00
|
|
|
static auto Enter() -> void;
|
|
|
|
auto main() -> void;
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto step(uint clocks) -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
|
|
|
auto power() -> void;
|
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
//memory.cpp
|
|
|
|
auto readRAM(uint11 addr) -> uint8;
|
|
|
|
auto writeRAM(uint11 addr, uint8 data) -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto readIO(uint16 addr) -> uint8;
|
|
|
|
auto writeIO(uint16 addr, uint8 data) -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto readDebugger(uint16 addr) -> uint8 override;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
|
|
|
auto serialize(serializer&) -> void;
|
|
|
|
|
|
|
|
//timing.cpp
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto read(uint16 addr) -> uint8 override;
|
|
|
|
auto write(uint16 addr, uint8 data) -> void override;
|
|
|
|
auto lastCycle() -> void override;
|
|
|
|
auto nmi(uint16& vector) -> void override;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto oamdma() -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto nmiLine(bool) -> void;
|
|
|
|
auto irqLine(bool) -> void;
|
|
|
|
auto apuLine(bool) -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
auto rdyLine(bool) -> void;
|
|
|
|
auto rdyAddr(bool valid, uint16 value = 0) -> void;
|
2015-12-05 05:44:49 +00:00
|
|
|
|
|
|
|
//protected:
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
vector<Thread*> peripherals;
|
Update to v082r04 release.
byuu says:
So, here's the deal. I now have three emulators. I don't think the
NES/GB ones are at all useful, but I do want them to be eventually. And
having them have those pathetic little GUIs like ui-gameboy, and keeping
everything in separate project folders, just doesn't work well for me.
I kind of "got around" the issue with the Game Boy, by only allowing SGB
mode emulation. But there is no "Super Nintendo" ... er ... wait ...
uhmm ... well, you know what I mean anyway.
So, my idea is to write a multi-emulator GUI, and keep the projects
together. The GUI is not going to change much. The way I envision this
working:
At startup, you have a menubar with: "Cartridge, Settings, Tools, Help".
Cartridge has "Load NES Cartridge", "Load SNES Cartridge", etc.
When you load something, Cartridge is replaced with the appropriate
system menu, eg "SNES". Here you have all your regular items: "power,
reset, controller port selection, etc." There is also a new "Unload
Cartridge" option, which is how you restore the "Cartridge" menu again.
I have no plans to emulate any other systems, but if I ever do emulate
something that doesn't take cartridges, I'll change the name to just
"Load" or something.
The cheat editor / state manager will look and act exactly the same. The
settings panel will look exactly the same. I'll simply show/hide
system-specific options as needed, like NES/SNES aspect ratio
correction, etc. The input mapping window will just have settings for
the currently loaded system. Video and audio tweaking will apply
cross-system, as will hotkey mapping.
The GUI stuff is mostly copy-paste, so it should only take me a week to
get it 95% back to where it was, so don't worry, this isn't total GUI
rewrite #80.
I am, however, making all the objects pointers, so that I can destruct
them all prior to main() returning, which is certainly one way of fixing
that annoying Windows/Qt crash.
Please only test on Linux. The Windows port is broken to hell, and will
give you a bad impression of the idea:
- menu groups are not hiding for some reason (all groups are showing, it
looks hideous)
- Timer interval(0) is taking 16ms per call, capping the FPS to ~64 tops
[FWIW, bsnes/accuracy gets 130fps, bgameboy gets 450fps, bnes gets
800fps; all run at lowest possible granularity]
- the OS keeps beeping when you press keys (AGAIN)
Of course, Qt and GTK+ don't let you shrink a window from the requested
geometry size, because they suck. So the video scaling stuff doesn't
work all that great yet.
Man, a metric fuckton of things need to be fixed in phoenix, and
I really don't know how to fix any of them :/
2011-09-09 04:08:38 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
uint8 ram[0x0800];
|
2011-09-16 11:44:07 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
struct IO {
|
|
|
|
bool interruptPending;
|
|
|
|
bool nmiPending;
|
|
|
|
bool nmiLine;
|
|
|
|
bool irqLine;
|
|
|
|
bool apuLine;
|
2011-09-16 11:44:07 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
bool rdyLine;
|
|
|
|
bool rdyAddrValid;
|
|
|
|
uint16 rdyAddrValue;
|
Update to v082r04 release.
byuu says:
So, here's the deal. I now have three emulators. I don't think the
NES/GB ones are at all useful, but I do want them to be eventually. And
having them have those pathetic little GUIs like ui-gameboy, and keeping
everything in separate project folders, just doesn't work well for me.
I kind of "got around" the issue with the Game Boy, by only allowing SGB
mode emulation. But there is no "Super Nintendo" ... er ... wait ...
uhmm ... well, you know what I mean anyway.
So, my idea is to write a multi-emulator GUI, and keep the projects
together. The GUI is not going to change much. The way I envision this
working:
At startup, you have a menubar with: "Cartridge, Settings, Tools, Help".
Cartridge has "Load NES Cartridge", "Load SNES Cartridge", etc.
When you load something, Cartridge is replaced with the appropriate
system menu, eg "SNES". Here you have all your regular items: "power,
reset, controller port selection, etc." There is also a new "Unload
Cartridge" option, which is how you restore the "Cartridge" menu again.
I have no plans to emulate any other systems, but if I ever do emulate
something that doesn't take cartridges, I'll change the name to just
"Load" or something.
The cheat editor / state manager will look and act exactly the same. The
settings panel will look exactly the same. I'll simply show/hide
system-specific options as needed, like NES/SNES aspect ratio
correction, etc. The input mapping window will just have settings for
the currently loaded system. Video and audio tweaking will apply
cross-system, as will hotkey mapping.
The GUI stuff is mostly copy-paste, so it should only take me a week to
get it 95% back to where it was, so don't worry, this isn't total GUI
rewrite #80.
I am, however, making all the objects pointers, so that I can destruct
them all prior to main() returning, which is certainly one way of fixing
that annoying Windows/Qt crash.
Please only test on Linux. The Windows port is broken to hell, and will
give you a bad impression of the idea:
- menu groups are not hiding for some reason (all groups are showing, it
looks hideous)
- Timer interval(0) is taking 16ms per call, capping the FPS to ~64 tops
[FWIW, bsnes/accuracy gets 130fps, bgameboy gets 450fps, bnes gets
800fps; all run at lowest possible granularity]
- the OS keeps beeping when you press keys (AGAIN)
Of course, Qt and GTK+ don't let you shrink a window from the requested
geometry size, because they suck. So the video scaling stuff doesn't
work all that great yet.
Man, a metric fuckton of things need to be fixed in phoenix, and
I really don't know how to fix any of them :/
2011-09-09 04:08:38 +00:00
|
|
|
|
Update to v099r04 release.
byuu says:
Changelog:
- lots of code cleanups to processor/r6502 (the switch.cpp file is only
halfway done ...)
- lots of code cleanups to fc/cpu
- removed fc/input
- implemented fc/controller
hex_usr, you may not like this, but I want to keep the controller port
and expansion port interface separate, like I do with the SNES. I realize
the NES' is used more for controllers, and the SNES' more for hardware
expansions, but ... they're not compatible pinouts and you can't really
connect one to the other.
Right now, I've only implemented the controller portion. I'll have to
get to the peripheral portion later.
Also, the gamepad implementation there now may be wrong. It's based off
the Super Famicom version obviously. I'm not sure if the Famicom has
different behavior with latching $4016 writes, or not. But, it works in
Mega Man II, so it's a start.
Everyone, be sure to remap your controls, and then set port 1 -> gamepad
after loading your first Famicom game with the new WIP.
2016-06-18 06:04:32 +00:00
|
|
|
bool oamdmaPending;
|
|
|
|
uint8 oamdmaPage;
|
|
|
|
} io;
|
Update to v082r04 release.
byuu says:
So, here's the deal. I now have three emulators. I don't think the
NES/GB ones are at all useful, but I do want them to be eventually. And
having them have those pathetic little GUIs like ui-gameboy, and keeping
everything in separate project folders, just doesn't work well for me.
I kind of "got around" the issue with the Game Boy, by only allowing SGB
mode emulation. But there is no "Super Nintendo" ... er ... wait ...
uhmm ... well, you know what I mean anyway.
So, my idea is to write a multi-emulator GUI, and keep the projects
together. The GUI is not going to change much. The way I envision this
working:
At startup, you have a menubar with: "Cartridge, Settings, Tools, Help".
Cartridge has "Load NES Cartridge", "Load SNES Cartridge", etc.
When you load something, Cartridge is replaced with the appropriate
system menu, eg "SNES". Here you have all your regular items: "power,
reset, controller port selection, etc." There is also a new "Unload
Cartridge" option, which is how you restore the "Cartridge" menu again.
I have no plans to emulate any other systems, but if I ever do emulate
something that doesn't take cartridges, I'll change the name to just
"Load" or something.
The cheat editor / state manager will look and act exactly the same. The
settings panel will look exactly the same. I'll simply show/hide
system-specific options as needed, like NES/SNES aspect ratio
correction, etc. The input mapping window will just have settings for
the currently loaded system. Video and audio tweaking will apply
cross-system, as will hotkey mapping.
The GUI stuff is mostly copy-paste, so it should only take me a week to
get it 95% back to where it was, so don't worry, this isn't total GUI
rewrite #80.
I am, however, making all the objects pointers, so that I can destruct
them all prior to main() returning, which is certainly one way of fixing
that annoying Windows/Qt crash.
Please only test on Linux. The Windows port is broken to hell, and will
give you a bad impression of the idea:
- menu groups are not hiding for some reason (all groups are showing, it
looks hideous)
- Timer interval(0) is taking 16ms per call, capping the FPS to ~64 tops
[FWIW, bsnes/accuracy gets 130fps, bgameboy gets 450fps, bnes gets
800fps; all run at lowest possible granularity]
- the OS keeps beeping when you press keys (AGAIN)
Of course, Qt and GTK+ don't let you shrink a window from the requested
geometry size, because they suck. So the video scaling stuff doesn't
work all that great yet.
Man, a metric fuckton of things need to be fixed in phoenix, and
I really don't know how to fix any of them :/
2011-09-09 04:08:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
extern CPU cpu;
|