bsnes/higan/processor/m68k/disassembler.cpp

324 lines
11 KiB
C++
Raw Normal View History

template<> auto M68K::_read<Byte>(uint32 addr) -> uint32 {
return read(0, addr);
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<> auto M68K::_read<Word>(uint32 addr) -> uint32 {
return read(1, addr);
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<> auto M68K::_read<Long>(uint32 addr) -> uint32 {
uint32 data = _read<Word>(addr + 0) << 16;
return data | _read<Word>(addr + 2) << 0;
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<uint Size> auto M68K::_readPC() -> uint32 {
auto data = _read<Size == Byte ? Word : Size>(_pc);
_pc += Size == Long ? 4 : 2;
return clip<Size>(data);
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::_dataRegister(DataRegister dr) -> string {
return {"d", dr.number};
}
auto M68K::_addressRegister(AddressRegister ar) -> string {
return {"a", ar.number};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<uint Size> auto M68K::_immediate() -> string {
return {"#$", hex(_readPC<Size>(), 2 << Size)};
}
template<uint Size> auto M68K::_address(EffectiveAddress& ea) -> string {
if(ea.mode == 9) return {"$", hex(_pc + (int16)_readPC(), 6L)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
return "???";
}
template<uint Size> auto M68K::_effectiveAddress(EffectiveAddress& ea) -> string {
if(ea.mode == 0) return {_dataRegister(DataRegister{ea.reg})};
if(ea.mode == 1) return {_addressRegister(AddressRegister{ea.reg})};
if(ea.mode == 2) return {"(", _addressRegister(AddressRegister{ea.reg}), ")"};
if(ea.mode == 3) return {"(", _addressRegister(AddressRegister{ea.reg}), ")+"};
if(ea.mode == 4) return {"-(", _addressRegister(AddressRegister{ea.reg}), ")"};
if(ea.mode == 5) return {"($", hex(read(AddressRegister{ea.reg}) + (int16)_readPC(), 6L), ")"};
if(ea.mode == 8) return {"($", hex(_readPC<Long>(), 6L), ")"};
if(ea.mode == 11) return {"#$", hex(_readPC<Size>(), 2 << Size)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
return "???";
}
auto M68K::_branch(uint8 displacement) -> string {
uint16 extension = _readPC();
_pc -= 2;
int32 offset = displacement ? sign<Byte>(displacement) : sign<Word>(extension);
return {"$", hex(_pc + offset, 6L)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<uint Size> auto M68K::_suffix() -> string {
return Size == Byte ? ".b" : Size == Word ? ".w" : ".l";
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::_condition(uint4 condition) -> string {
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
static const string conditions[16] = {
"t ", "f ", "hi", "ls", "cc", "cs", "ne", "eq",
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
"vc", "vs", "pl", "mi", "ge", "lt", "gt", "le",
};
return conditions[condition];
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
auto M68K::disassemble(uint32 pc) -> string {
uint16 opcode;
return {hex(_pc = pc, 6L), " ", hex(opcode = _readPC(), 4L), " ", disassembleTable[opcode]()};
}
auto M68K::disassembleRegisters() -> string {
return {
hex(r.d[0], 8L), " ", hex(r.d[1], 8L), " ", hex(r.d[2], 8L), " ", hex(r.d[3], 8L), " ",
hex(r.d[4], 8L), " ", hex(r.d[5], 8L), " ", hex(r.d[6], 8L), " ", hex(r.d[7], 8L), " ",
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
r.t ? "T" : "t",
r.s ? "S" : "s",
(uint)r.i,
r.c ? "C" : "c",
r.v ? "V" : "v",
r.z ? "Z" : "z",
r.n ? "N" : "n",
r.x ? "X" : "x", "\n",
hex(r.a[0], 8L), " ", hex(r.a[1], 8L), " ", hex(r.a[2], 8L), " ", hex(r.a[3], 8L), " ",
hex(r.a[4], 8L), " ", hex(r.a[5], 8L), " ", hex(r.a[6], 8L), " ", hex(r.a[7], 8L), " ", hex(r.sp, 8L)
};
}
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
//
template<uint Size> auto M68K::disassembleADD(DataRegister dr, uint1 direction, EffectiveAddress ea) -> string {
string op{"add", _suffix<Size>(), " "};
if(direction == 0) {
return {op, _effectiveAddress<Size>(ea), ",", _dataRegister(dr)};
} else {
return {op, "", _dataRegister(dr), ",", _effectiveAddress<Size>(ea)};
}
}
template<uint Size> auto M68K::disassembleANDI(EffectiveAddress ea) -> string {
return {"andi", _suffix<Size>(), " ", _immediate<Size>(), ",", _effectiveAddress<Size>(ea)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::disassembleANDI_TO_CCR() -> string {
return {"andi ", _immediate<Byte>(), ",ccr"};
}
auto M68K::disassembleANDI_TO_SR() -> string {
return {"andi ", _immediate<Word>(), ",sr"};
}
template<uint Size> auto M68K::disassembleASL(uint4 shift, DataRegister modify) -> string {
return {"asl", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleASL(DataRegister shift, DataRegister modify) -> string {
return {"asl", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(modify)};
}
auto M68K::disassembleASL(EffectiveAddress modify) -> string {
return {"asl", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
template<uint Size> auto M68K::disassembleASR(uint4 shift, DataRegister modify) -> string {
return {"asr", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleASR(DataRegister shift, DataRegister modify) -> string {
return {"asr", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(modify)};
}
auto M68K::disassembleASR(EffectiveAddress modify) -> string {
return {"asr", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
auto M68K::disassembleBCC(uint4 condition, uint8 displacement) -> string {
auto cc = _condition(condition);
if(condition == 0) cc = "ra";
if(condition == 1) cc = "sr";
return {"b", cc, " ", _branch(displacement)};
}
template<uint Size> auto M68K::disassembleBTST(DataRegister dr, EffectiveAddress ea) -> string {
return {"btst ", _dataRegister(dr), ",", _effectiveAddress<Size>(ea)};
}
template<uint Size> auto M68K::disassembleBTST(EffectiveAddress ea) -> string {
return {"btst ", _immediate<Byte>(), ",", _effectiveAddress<Size>(ea)};
}
template<uint Size> auto M68K::disassembleCLR(EffectiveAddress ea) -> string {
return {"clr", _suffix<Size>(), " ", _effectiveAddress<Size>(ea)};
}
template<uint Size> auto M68K::disassembleCMP(DataRegister dr, EffectiveAddress ea) -> string {
return {"cmp", _suffix<Size>(), " ", _effectiveAddress<Word>(ea), ",", _dataRegister(dr)};
}
auto M68K::disassembleDBCC(uint4 condition, DataRegister dr) -> string {
auto base = _pc;
auto displacement = (int16)_readPC();
return {"db", _condition(condition), " ", _dataRegister(dr), ",$", hex(base + displacement, 6L)};
}
auto M68K::disassembleEORI_TO_CCR() -> string {
return {"eori ", _immediate<Byte>(), ",ccr"};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::disassembleEORI_TO_SR() -> string {
return {"eori ", _immediate<Word>(), ",sr"};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::disassembleLEA(AddressRegister ar, EffectiveAddress ea) -> string {
return {"lea ", _address<Long>(ea), ",", _addressRegister(ar)};
}
template<uint Size> auto M68K::disassembleLSL(uint4 immediate, DataRegister dr) -> string {
return {"lsl", _suffix<Size>(), " #", immediate, ",", _dataRegister(dr)};
}
template<uint Size> auto M68K::disassembleLSL(DataRegister sr, DataRegister dr) -> string {
return {"lsl", _suffix<Size>(), " ", _dataRegister(sr), ",", _dataRegister(dr)};
}
auto M68K::disassembleLSL(EffectiveAddress ea) -> string {
return {"lsl", _suffix<Word>(), " ", _effectiveAddress<Word>(ea)};
}
template<uint Size> auto M68K::disassembleLSR(uint4 immediate, DataRegister dr) -> string {
return {"lsr", _suffix<Size>(), " #", immediate, ",", _dataRegister(dr)};
}
template<uint Size> auto M68K::disassembleLSR(DataRegister shift, DataRegister dr) -> string {
return {"lsr", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(dr)};
}
auto M68K::disassembleLSR(EffectiveAddress ea) -> string {
return {"lsr", _suffix<Word>(), " ", _effectiveAddress<Word>(ea)};
}
template<uint Size> auto M68K::disassembleMOVE(EffectiveAddress to, EffectiveAddress from) -> string {
return {"move", _suffix<Size>(), " ", _effectiveAddress<Size>(from), ",", _effectiveAddress<Size>(to)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<uint Size> auto M68K::disassembleMOVEA(AddressRegister ar, EffectiveAddress ea) -> string {
return {"movea ", _effectiveAddress<Size>(ea), ",", _addressRegister(ar)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
template<uint Size> auto M68K::disassembleMOVEM(uint1 direction, EffectiveAddress ea) -> string {
string op{"movem", _suffix<Size>(), " "};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
uint16 list = _readPC();
string regs;
for(uint n : range(8)) if(list.bit(0 + n)) regs.append(_dataRegister(DataRegister{n}), ",");
regs.trimRight(",");
if(regs && list >> 8) regs.append("/");
for(uint n : range(8)) if(list.bit(8 + n)) regs.append(_addressRegister(AddressRegister{n}), ",");
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
regs.trimRight(",");
if(direction == 0) {
return {op, regs, ",", _effectiveAddress<Size>(ea)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
} else {
return {op, _effectiveAddress<Size>(ea), ",", regs};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
}
auto M68K::disassembleMOVEQ(DataRegister dr, uint8 immediate) -> string {
return {"moveq #$", hex(immediate, 2L), ",", _dataRegister(dr)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
auto M68K::disassembleMOVE_FROM_SR(EffectiveAddress ea) -> string {
return {"move sr,", _effectiveAddress<Word>(ea)};
}
auto M68K::disassembleMOVE_TO_CCR(EffectiveAddress ea) -> string {
return {"move ", _effectiveAddress<Byte>(ea), ",ccr"};
}
auto M68K::disassembleMOVE_TO_SR(EffectiveAddress ea) -> string {
return {"move ", _effectiveAddress<Word>(ea), ",sr"};
}
auto M68K::disassembleMOVE_USP(uint1 direction, AddressRegister ar) -> string {
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
if(direction == 0) {
return {"move ", _addressRegister(ar), ",usp"};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
} else {
return {"move usp,", _addressRegister(ar)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}
}
auto M68K::disassembleNOP() -> string {
return {"nop "};
}
auto M68K::disassembleORI_TO_CCR() -> string {
return {"ori ", _immediate<Byte>(), ",ccr"};
}
auto M68K::disassembleORI_TO_SR() -> string {
return {"ori ", _immediate<Word>(), ",sr"};
}
template<uint Size> auto M68K::disassembleROL(uint4 shift, DataRegister modify) -> string {
return {"rol", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleROL(DataRegister shift, DataRegister modify) -> string {
return {"rol", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(modify)};
}
auto M68K::disassembleROL(EffectiveAddress modify) -> string {
return {"rol", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
template<uint Size> auto M68K::disassembleROR(uint4 shift, DataRegister modify) -> string {
return {"ror", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleROR(DataRegister shift, DataRegister modify) -> string {
return {"ror", _suffix<Size>(), " ", _dataRegister(shift) ,",", _dataRegister(modify)};
}
auto M68K::disassembleROR(EffectiveAddress modify) -> string {
return {"ror", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
template<uint Size> auto M68K::disassembleROXL(uint4 shift, DataRegister modify) -> string {
return {"roxl", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleROXL(DataRegister shift, DataRegister modify) -> string {
return {"roxl", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(modify)};
}
auto M68K::disassembleROXL(EffectiveAddress modify) -> string {
return {"roxl", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
template<uint Size> auto M68K::disassembleROXR(uint4 shift, DataRegister modify) -> string {
return {"roxr", _suffix<Size>(), " #", shift, ",", _dataRegister(modify)};
}
template<uint Size> auto M68K::disassembleROXR(DataRegister shift, DataRegister modify) -> string {
return {"roxr", _suffix<Size>(), " ", _dataRegister(shift), ",", _dataRegister(modify)};
}
auto M68K::disassembleROXR(EffectiveAddress modify) -> string {
return {"roxr", _suffix<Word>(), " ", _effectiveAddress<Word>(modify)};
}
auto M68K::disassembleRTS() -> string {
return {"rts "};
}
template<uint Size> auto M68K::disassembleSUBQ(uint4 immediate, EffectiveAddress ea) -> string {
return {"subq", _suffix<Size>(), " #", immediate, _effectiveAddress<Size>(ea)};
}
template<uint Size> auto M68K::disassembleTST(EffectiveAddress ea) -> string {
return {"tst", _suffix<Size>(), " ", _effectiveAddress<Size>(ea)};
Update to v100r06 release. byuu says: Up to ten 68K instructions out of somewhere between 61 and 88, depending upon which PDF you look at. Of course, some of them aren't 100% completed yet, either. Lots of craziness with MOVEM, and BCC has a BSR variant that needs stack push/pop functions. This WIP actually took over eight hours to make, going through every possible permutation on how to design the core itself. The updated design now builds both the instruction decoder+dispatcher and the disassembler decoder into the same main loop during M68K's constructor. The special cases are also really psychotic on this processor, and I'm afraid of missing something via the fallthrough cases. So instead, I'm ordering the instructions alphabetically, and including exclusion cases to ignore binding invalid cases. If I end up remapping an existing register, then it'll throw a run-time assertion at program startup. I wanted very much to get rid of struct EA (EffectiveAddress), but it's too difficult to keep track of the internal effective address without it. So I split out the size to a separate parameter, since every opcode only has one size parameter, and otherwise it was getting duplicated in opcodes that take two EAs, and was also awkward with the flag testing. It's a bit more typing, but I feel it's more clean this way. Overall, I'm really worried this is going to be too slow. I don't want to turn the EA stuff into templates, because that will massively bloat out compilation times and object sizes, and will also need a special DSL preprocessor since C++ doesn't have a static for loop. I can definitely optimize a lot of EA's address/read/write functions away once the core is completed, but it's never going to hold a candle to a templatized 68K core. ---- Forgot to include the SA-1 regression fix. I always remember immediately after I upload and archive the WIP. Will try to get that in next time, I guess.
2016-07-16 08:39:44 +00:00
}