2011-10-02 10:05:45 +00:00
|
|
|
#ifdef NALL_STRING_INTERNAL_HPP
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
//convert any (supported) type to a const char* without constructing a new nall::string
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//this is used inside string{...} to build nall::string values
|
|
|
|
|
|
|
|
namespace nall {
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//base types
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
|
|
|
template<> struct stringify<bool> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
bool _value;
|
|
|
|
auto data() const -> const char* { return _value ? "true" : "false"; }
|
|
|
|
auto size() const -> unsigned { return _value ? 4 : 5; }
|
|
|
|
stringify(bool value) : _value(value) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<char> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return 1; }
|
|
|
|
stringify(char source) { _data[0] = source; _data[1] = 0; }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//signed integers
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
|
|
|
template<> struct stringify<signed char> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(signed char) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(signed char source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<signed short> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(signed short) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(signed short source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<signed int> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(signed int) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(signed int source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<signed long> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(signed long) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(signed long source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<signed long long> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(signed long long) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(signed long long source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<unsigned bits> struct stringify<int_t<bits>> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[2 + sizeof(intmax_t) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(int_t<bits> source) { integer(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//unsigned integers
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
|
|
|
template<> struct stringify<unsigned char> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(unsigned char) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(unsigned char source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<unsigned short> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(unsigned short) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(unsigned short source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<unsigned int> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(unsigned int) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(unsigned int source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<unsigned long> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(unsigned long) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(unsigned long source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<unsigned long long> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(unsigned long long) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(unsigned long long source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<unsigned bits> struct stringify<uint_t<bits>> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[1 + sizeof(uintmax_t) * 3];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(uint_t<bits> source) { decimal(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//floating-point
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
|
|
|
template<> struct stringify<float> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[256];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(float source) { real(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<double> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[256];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(double source) { real(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<long double> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
char _data[256];
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(long double source) { real(_data, source); }
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//arrays
|
2013-03-15 13:11:33 +00:00
|
|
|
|
|
|
|
template<> struct stringify<vector<uint8_t>> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
vector<char> _text;
|
|
|
|
auto data() const -> const char* { return _text.data(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(vector<uint8_t> source) {
|
|
|
|
_text.resize(source.size() + 1);
|
|
|
|
memory::copy(_text.data(), source.data(), source.size());
|
|
|
|
_text[_text.size()] = 0;
|
2013-03-15 13:11:33 +00:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<const vector<uint8_t>&> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
vector<char> _text;
|
|
|
|
auto data() const -> const char* { return _text.data(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(const vector<uint8_t>& source) {
|
|
|
|
_text.resize(source.size() + 1);
|
|
|
|
memory::copy(_text.data(), source.data(), source.size());
|
|
|
|
_text[_text.size()] = 0;
|
2013-03-15 13:11:33 +00:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//char arrays
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
|
|
|
template<> struct stringify<char*> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const char* _data;
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(char* source) : _data(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<const char*> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const char* _data;
|
|
|
|
auto data() const -> const char* { return _data; }
|
|
|
|
auto size() const -> unsigned { return strlen(_data); }
|
|
|
|
stringify(const char* source) : _data(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//strings
|
|
|
|
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
template<> struct stringify<string> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const string& _text;
|
|
|
|
auto data() const -> const char* { return _text.data(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(const string& source) : _text(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<const string&> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const string& _text;
|
|
|
|
auto data() const -> const char* { return _text.data(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(const string& source) : _text(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
#if defined(QSTRING_H)
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
//Qt
|
|
|
|
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
template<> struct stringify<QString> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const QString& _text;
|
|
|
|
auto data() const -> const char* { return _text.toUtf8().constData(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(const QString& source) : _text(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
template<> struct stringify<const QString&> {
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
const QString& _text;
|
|
|
|
auto data() const -> const char* { return _text.toUtf8().constData(); }
|
|
|
|
auto size() const -> unsigned { return _text.size(); }
|
|
|
|
stringify(const QString& source) : _text(source) {}
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
string::operator QString() const {
|
|
|
|
return QString::fromUtf8(*this);
|
|
|
|
}
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
#endif
|
|
|
|
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
//
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
template<typename T> auto make_string(T value) -> stringify<T> {
|
Update to v084r01 release.
I rewrote the S-SMP processor core (implementation of the 256 opcodes),
utilizing my new 6502-like syntax. It matches what bass v05r01 uses.
Took 10 hours.
Due to being able to group the "mov reg,mem" opcodes together with
"adc/sbc/ora/and/eor/cmp" sets, the total code size was reduced from
55.7KB to 42.5KB for identical accuracy and speed.
I also dropped the trick I was using to pass register variables as
template arguments, and instead just use a switch table to pass them as
function arguments. Makes the table a lot easier to read.
Passes all of my S-SMP tests, and all of blargg's
arithmetic/cycle-timing S-SMP tests. Runs Zelda 3 great as well. Didn't
test further.
This does have the potential to cause some regressions if I've messed
anything up, and none of the above tests caught it, so as always,
testing would be appreciated.
Anyway, yeah. By writing the actual processor with this new mnemonic
set, it confirms the parallels I've made.
My guess is that Sony really did clone the 6502, but was worried about
legal implications or something and changed the mnemonics last-minute.
(Note to self: need to re-enable snes.random before v085 official.)
EDIT: oh yeah, I also commented out the ALSA snd_pcm_drain() inside
term(). Without it, there is a tiny pop when the driver is
re-initialized. But with it, the entire emulator would lock up for five
whole seconds waiting on that call to complete. I'll take the pop any
day over that.
2011-11-17 12:05:35 +00:00
|
|
|
return stringify<T>(std::forward<T>(value));
|
|
|
|
}
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|