2010-08-09 13:28:56 +00:00
|
|
|
#include "mode7.cpp"
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
auto PPU::Background::voffset() const -> uint16 {
|
|
|
|
|
if(r.mosaic) return latch.voffset;
|
|
|
|
|
return r.voffset;
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
auto PPU::Background::hoffset() const -> uint16 {
|
|
|
|
|
if(r.mosaic) return latch.hoffset;
|
|
|
|
|
return r.hoffset;
|
2012-05-09 23:35:29 +00:00
|
|
|
}
|
|
|
|
|
|
2011-06-05 03:45:04 +00:00
|
|
|
//V = 0, H = 0
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
auto PPU::Background::frame() -> void {
|
2010-08-28 09:47:06 +00:00
|
|
|
}
|
|
|
|
|
|
2011-06-05 03:45:04 +00:00
|
|
|
//H = 0
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
auto PPU::Background::scanline() -> void {
|
2011-06-05 03:45:04 +00:00
|
|
|
}
|
|
|
|
|
|
2012-05-09 23:35:29 +00:00
|
|
|
//H = 28
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
auto PPU::Background::begin() -> void {
|
2016-06-14 10:51:54 +00:00
|
|
|
bool hires = (ppu.r.bgMode == 5 || ppu.r.bgMode == 6);
|
Update to v068r14 release.
byuu says:
Holy hell, that was a total brain twister. After hours of crazy bit
twiddling and debug printf's, I finally figured out how to allow both
lores and hires scrolling in the accurate PPU renderer. In the process,
I modified the main loop to run from -7 to 255, regardless of the hires
setting, and perform X adjustment inside the tile fetching. This fixed
a strange main/subscreen misalignment issue, so I was able to restore
the proper sub-then-main rendering for the final screen output stage.
Code looks a good bit cleaner this way overall.
I also added load state and save state menus to the tools menu, so you
can use the menubar to load and save to ten slots. I am thinking that
I should nuke the icons. As pretty as they are, it's getting tiresome
trying to find icons for everything, I have no pictures to represent
loading or saving a slot, nor to represent individual slots. I'll just
stick to radios and checkboxes.
2010-09-05 23:08:03 +00:00
|
|
|
x = -7;
|
2016-06-14 10:51:54 +00:00
|
|
|
y = ppu.vcounter();
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2011-06-05 03:25:24 +00:00
|
|
|
if(y == 1) {
|
2016-06-14 10:51:54 +00:00
|
|
|
mosaic.vcounter = r.mosaic + 1;
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.voffset = 1;
|
2016-06-14 10:51:54 +00:00
|
|
|
latch.hoffset = r.hoffset;
|
|
|
|
|
latch.voffset = r.voffset;
|
2011-06-05 03:25:24 +00:00
|
|
|
} else if(--mosaic.vcounter == 0) {
|
2016-06-14 10:51:54 +00:00
|
|
|
mosaic.vcounter = r.mosaic + 1;
|
|
|
|
|
mosaic.voffset += r.mosaic + 1;
|
|
|
|
|
latch.hoffset = r.hoffset;
|
|
|
|
|
latch.voffset = r.voffset;
|
2010-08-28 09:47:06 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
tileCounter = (7 - (latch.hoffset & 7)) << hires;
|
|
|
|
|
for(auto& d : data) d = 0;
|
2011-06-05 03:25:24 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
mosaic.hcounter = r.mosaic + 1;
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.hoffset = 0;
|
2011-06-05 03:45:04 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(r.mode == Mode::Mode7) return beginMode7();
|
|
|
|
|
if(r.mosaic == 0) {
|
|
|
|
|
latch.hoffset = r.hoffset;
|
|
|
|
|
latch.voffset = r.voffset;
|
2011-06-05 03:45:04 +00:00
|
|
|
}
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
auto PPU::Background::getTile() -> void {
|
|
|
|
|
bool hires = (ppu.r.bgMode == 5 || ppu.r.bgMode == 6);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint colorDepth = (r.mode == Mode::BPP2 ? 0 : r.mode == Mode::BPP4 ? 1 : 2);
|
|
|
|
|
uint paletteOffset = (ppu.r.bgMode == 0 ? id << 5 : 0);
|
|
|
|
|
uint paletteSize = 2 << colorDepth;
|
|
|
|
|
uint tileMask = 0x0fff >> colorDepth;
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
uint tiledataIndex = r.tiledataAddress >> (3 + colorDepth);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint tileHeight = (r.tileSize == TileSize::Size8x8 ? 3 : 4);
|
|
|
|
|
uint tileWidth = (!hires ? tileHeight : 4);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint width = 256 << hires;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint hmask = (tileHeight == 3 ? width : width << 1);
|
|
|
|
|
uint vmask = hmask;
|
|
|
|
|
if(r.screenSize & 1) hmask <<= 1;
|
|
|
|
|
if(r.screenSize & 2) vmask <<= 1;
|
2011-06-05 03:25:24 +00:00
|
|
|
hmask--;
|
|
|
|
|
vmask--;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint px = x << hires;
|
|
|
|
|
uint py = (r.mosaic == 0 ? y : mosaic.voffset);
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint hscroll = hoffset();
|
|
|
|
|
uint vscroll = voffset();
|
2010-08-09 13:28:56 +00:00
|
|
|
if(hires) {
|
|
|
|
|
hscroll <<= 1;
|
2016-06-14 10:51:54 +00:00
|
|
|
if(ppu.r.interlace) py = (py << 1) + ppu.field();
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint hoffset = hscroll + px;
|
|
|
|
|
uint voffset = vscroll + py;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(ppu.r.bgMode == 2 || ppu.r.bgMode == 4 || ppu.r.bgMode == 6) {
|
|
|
|
|
uint16 offsetX = (x + (hscroll & 7));
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(offsetX >= 8) {
|
|
|
|
|
uint hval = ppu.bg3.getTile((offsetX - 8) + (ppu.bg3.hoffset() & ~7), ppu.bg3.voffset() + 0);
|
|
|
|
|
uint vval = ppu.bg3.getTile((offsetX - 8) + (ppu.bg3.hoffset() & ~7), ppu.bg3.voffset() + 8);
|
|
|
|
|
uint validMask = (id == ID::BG1 ? 0x2000 : 0x4000);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(ppu.r.bgMode == 4) {
|
|
|
|
|
if(hval & validMask) {
|
Update to v068r14 release.
byuu says:
Holy hell, that was a total brain twister. After hours of crazy bit
twiddling and debug printf's, I finally figured out how to allow both
lores and hires scrolling in the accurate PPU renderer. In the process,
I modified the main loop to run from -7 to 255, regardless of the hires
setting, and perform X adjustment inside the tile fetching. This fixed
a strange main/subscreen misalignment issue, so I was able to restore
the proper sub-then-main rendering for the final screen output stage.
Code looks a good bit cleaner this way overall.
I also added load state and save state menus to the tools menu, so you
can use the menubar to load and save to ten slots. I am thinking that
I should nuke the icons. As pretty as they are, it's getting tiresome
trying to find icons for everything, I have no pictures to represent
loading or saving a slot, nor to represent individual slots. I'll just
stick to radios and checkboxes.
2010-09-05 23:08:03 +00:00
|
|
|
if((hval & 0x8000) == 0) {
|
2016-06-14 10:51:54 +00:00
|
|
|
hoffset = offsetX + (hval & ~7);
|
2010-08-09 13:28:56 +00:00
|
|
|
} else {
|
|
|
|
|
voffset = y + hval;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} else {
|
2016-06-14 10:51:54 +00:00
|
|
|
if(hval & validMask) hoffset = offsetX + (hval & ~7);
|
|
|
|
|
if(vval & validMask) voffset = y + vval;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2011-06-05 03:25:24 +00:00
|
|
|
hoffset &= hmask;
|
|
|
|
|
voffset &= vmask;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint screenX = (r.screenSize & 1 ? 32 << 5 : 0);
|
|
|
|
|
uint screenY = (r.screenSize & 2 ? 32 << 5 : 0);
|
|
|
|
|
if(r.screenSize == 3) screenY <<= 1;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint tx = hoffset >> tileWidth;
|
|
|
|
|
uint ty = voffset >> tileHeight;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
2016-06-24 12:16:53 +00:00
|
|
|
uint16 offset = ((ty & 0x1f) << 5) + (tx & 0x1f);
|
2016-06-14 10:51:54 +00:00
|
|
|
if(tx & 0x20) offset += screenX;
|
|
|
|
|
if(ty & 0x20) offset += screenY;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
2016-06-24 12:16:53 +00:00
|
|
|
uint16 address = r.screenAddress + offset;
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
tile = ppu.vram[address];
|
2016-06-14 10:51:54 +00:00
|
|
|
bool mirrorY = tile & 0x8000;
|
|
|
|
|
bool mirrorX = tile & 0x4000;
|
|
|
|
|
priority = r.priority[bool(tile & 0x2000)];
|
|
|
|
|
paletteNumber = (tile >> 10) & 7;
|
|
|
|
|
paletteIndex = paletteOffset + (paletteNumber << paletteSize);
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(tileWidth == 4 && (bool)(hoffset & 8) != mirrorX) tile += 1;
|
|
|
|
|
if(tileHeight == 4 && (bool)(voffset & 8) != mirrorY) tile += 16;
|
|
|
|
|
uint16 character = ((tile & 0x03ff) + tiledataIndex) & tileMask;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(mirrorY) voffset ^= 7;
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
offset = (character << (3 + colorDepth)) + (voffset & 7);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
switch(r.mode) {
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP8:
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
data[1].bits(16,31) = ppu.vram[offset + 24];
|
|
|
|
|
data[1].bits( 0,15) = ppu.vram[offset + 16];
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP4:
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
data[0].bits(16,31) = ppu.vram[offset + 8];
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP2:
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
data[0].bits( 0,15) = ppu.vram[offset + 0];
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(mirrorX) for(auto n : range(2)) {
|
|
|
|
|
data[n] = ((data[n] >> 4) & 0x0f0f0f0f) | ((data[n] << 4) & 0xf0f0f0f0);
|
|
|
|
|
data[n] = ((data[n] >> 2) & 0x33333333) | ((data[n] << 2) & 0xcccccccc);
|
|
|
|
|
data[n] = ((data[n] >> 1) & 0x55555555) | ((data[n] << 1) & 0xaaaaaaaa);
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
|
|
|
|
}
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
auto PPU::Background::run(bool screen) -> void {
|
2016-06-14 10:51:54 +00:00
|
|
|
if(ppu.vcounter() == 0) return;
|
|
|
|
|
bool hires = (ppu.r.bgMode == 5 || ppu.r.bgMode == 6);
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(screen == Screen::Below) {
|
|
|
|
|
output.above.priority = 0;
|
|
|
|
|
output.below.priority = 0;
|
|
|
|
|
if(!hires) return;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(tileCounter-- == 0) {
|
|
|
|
|
tileCounter = 7;
|
|
|
|
|
getTile();
|
Update to v068r14 release.
byuu says:
Holy hell, that was a total brain twister. After hours of crazy bit
twiddling and debug printf's, I finally figured out how to allow both
lores and hires scrolling in the accurate PPU renderer. In the process,
I modified the main loop to run from -7 to 255, regardless of the hires
setting, and perform X adjustment inside the tile fetching. This fixed
a strange main/subscreen misalignment issue, so I was able to restore
the proper sub-then-main rendering for the final screen output stage.
Code looks a good bit cleaner this way overall.
I also added load state and save state menus to the tools menu, so you
can use the menubar to load and save to ten slots. I am thinking that
I should nuke the icons. As pretty as they are, it's getting tiresome
trying to find icons for everything, I have no pictures to represent
loading or saving a slot, nor to represent individual slots. I'll just
stick to radios and checkboxes.
2010-09-05 23:08:03 +00:00
|
|
|
}
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(r.mode == Mode::Mode7) return runMode7();
|
Update to v094r39 release.
byuu says:
Changelog:
- SNES mid-scanline BGMODE fixes finally merged (can run
atx2.zip{mode7.smc}+mtest(2).sfc properly now)
- Makefile now discards all built-in rules and variables
- switch on bool warning disabled for GCC now as well (was already
disabled for Clang)
- when loading a game, if any required files are missing, display
a warning message box (manifest.bml, program.rom, bios.rom, etc)
- when loading a game (or a game slot), if manifest.bml is missing, it
will invoke icarus to try and generate it
- if that fails (icarus is missing or the folder is bad), you will get
a warning telling you that the manifest can't be loaded
The warning prompt on missing files work for both games and the .sys
folders and their files. For some reason, failing to load the DMG/CGB
BIOS is causing a crash before I can display the modal dialog. I have no
idea why, and the stack frame backtrace is junk.
I also can't seem to abort the failed loading process. If I call
Program::unloadMedia(), I get a nasty segfault. Again with a really
nasty stack trace. So for now, it'll just end up sitting there emulating
an empty ROM (solid black screen.) In time, I'd like to fix that too.
Lastly, I need a better method than popen for Windows. popen is kind of
ugly and flashes a console window for a brief second even if the
application launched is linked with -mwindows. Not sure if there even is
one (I need to read the stdout result, so CreateProcess may not work
unless I do something nasty like "> %tmp%/temp") I'm also using the
regular popen instead of _wpopen, so for this WIP, it won't work if your
game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
uint8 palette = getTileColor();
|
2011-06-05 03:25:24 +00:00
|
|
|
if(x == 0) mosaic.hcounter = 1;
|
|
|
|
|
if(x >= 0 && --mosaic.hcounter == 0) {
|
2016-06-14 10:51:54 +00:00
|
|
|
mosaic.hcounter = r.mosaic + 1;
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.priority = priority;
|
2016-06-14 10:51:54 +00:00
|
|
|
mosaic.palette = palette ? paletteIndex + palette : 0;
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.tile = tile;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
2016-06-14 10:51:54 +00:00
|
|
|
if(screen == Screen::Above) x++;
|
2011-06-05 03:25:24 +00:00
|
|
|
if(mosaic.palette == 0) return;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
if(!hires || screen == Screen::Above) if(r.aboveEnable) output.above = mosaic;
|
|
|
|
|
if(!hires || screen == Screen::Below) if(r.belowEnable) output.below = mosaic;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
auto PPU::Background::getTileColor() -> uint {
|
|
|
|
|
uint color = 0;
|
2012-02-18 07:49:52 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
switch(r.mode) {
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP8:
|
2016-06-15 11:32:17 +00:00
|
|
|
color += data[1] >> 24 & 0x80;
|
|
|
|
|
color += data[1] >> 17 & 0x40;
|
|
|
|
|
color += data[1] >> 10 & 0x20;
|
|
|
|
|
color += data[1] >> 3 & 0x10;
|
2016-06-14 10:51:54 +00:00
|
|
|
data[1] <<= 1;
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP4:
|
2016-06-14 10:51:54 +00:00
|
|
|
color += data[0] >> 28 & 0x08;
|
|
|
|
|
color += data[0] >> 21 & 0x04;
|
2012-02-18 07:49:52 +00:00
|
|
|
case Mode::BPP2:
|
2016-06-14 10:51:54 +00:00
|
|
|
color += data[0] >> 14 & 0x02;
|
|
|
|
|
color += data[0] >> 7 & 0x01;
|
|
|
|
|
data[0] <<= 1;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
2012-02-18 07:49:52 +00:00
|
|
|
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
return color;
|
|
|
|
|
}
|
|
|
|
|
|
Update to v095r05 release.
byuu says:
Changelog:
- GBA: lots of emulation improvements
- PPU PRAM is 16-bits wide
- DMA masks &~1/Half, &~3/Word
- VRAM OBJ 8-bit writes are ignored
- OAM 8-bit writes are ignored
- BGnCNT unused bits are writable*
- BG(0,1)CNT can't set the d13
- BLDALPHA is readable (fixes Donkey Kong Country, etc)
- SNES: lots of code cleanups
- sfc/chip => sfc/coprocessor
- UI: save most recent controller selection
GBA test scores: 1552/1552, 37/38, 1020/1260
(* forgot to add the value to the read function, so endrift's I/O tests
for them will fail. Fixed locally.)
Note: SNES is the only system with multiple controller/expansion port
options, and as such is the only one with a "None" option. Because it's
shared by the controller and expansion port, it ends up sorted first in
the list. This means that on your first run, you'll need to go to Super
Famicom->Controller Port 1 and select "Gamepad", otherwise input won't
work.
Also note that changing the expansion port device requires loading a new
cart. Unlike controllers, you aren't meant to hotplug expansion port
devices.
2015-11-12 10:15:03 +00:00
|
|
|
auto PPU::Background::reset() -> void {
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
r.tiledataAddress = (random(0x0000) & 0x07) << 12;
|
|
|
|
|
r.screenAddress = (random(0x0000) & 0x7c) << 8;
|
2016-06-14 10:51:54 +00:00
|
|
|
r.screenSize = random(0);
|
|
|
|
|
r.mosaic = random(0);
|
|
|
|
|
r.tileSize = random(0);
|
|
|
|
|
r.mode = 0;
|
|
|
|
|
for(auto& p : r.priority) p = 0;
|
|
|
|
|
r.aboveEnable = random(0);
|
|
|
|
|
r.belowEnable = random(0);
|
|
|
|
|
r.hoffset = random(0x0000);
|
|
|
|
|
r.voffset = random(0x0000);
|
|
|
|
|
|
|
|
|
|
latch.hoffset = 0;
|
|
|
|
|
latch.voffset = 0;
|
|
|
|
|
|
|
|
|
|
output.above.palette = 0;
|
|
|
|
|
output.above.priority = 0;
|
|
|
|
|
output.below.palette = 0;
|
|
|
|
|
output.below.priority = 0;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.priority = 0;
|
|
|
|
|
mosaic.palette = 0;
|
|
|
|
|
mosaic.tile = 0;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2011-06-05 03:25:24 +00:00
|
|
|
mosaic.vcounter = 0;
|
|
|
|
|
mosaic.voffset = 0;
|
|
|
|
|
mosaic.hcounter = 0;
|
|
|
|
|
mosaic.hoffset = 0;
|
2010-09-09 06:34:54 +00:00
|
|
|
|
2011-06-05 03:25:24 +00:00
|
|
|
x = 0;
|
|
|
|
|
y = 0;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
tileCounter = 0;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
tile = 0;
|
|
|
|
|
priority = 0;
|
2016-06-14 10:51:54 +00:00
|
|
|
paletteNumber = 0;
|
|
|
|
|
paletteIndex = 0;
|
|
|
|
|
for(auto& d : data) d = 0;
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-14 10:51:54 +00:00
|
|
|
auto PPU::Background::getTile(uint x, uint y) -> uint {
|
|
|
|
|
bool hires = (ppu.r.bgMode == 5 || ppu.r.bgMode == 6);
|
|
|
|
|
uint tileHeight = (r.tileSize == TileSize::Size8x8 ? 3 : 4);
|
|
|
|
|
uint tileWidth = (!hires ? tileHeight : 4);
|
|
|
|
|
uint width = (!hires ? 256 : 512);
|
|
|
|
|
uint maskX = (tileHeight == 3 ? width : width << 1);
|
|
|
|
|
uint maskY = maskX;
|
|
|
|
|
if(r.screenSize & 1) maskX <<= 1;
|
|
|
|
|
if(r.screenSize & 2) maskY <<= 1;
|
|
|
|
|
maskX--;
|
|
|
|
|
maskY--;
|
|
|
|
|
|
|
|
|
|
uint screenX = (r.screenSize & 1 ? 32 << 5 : 0);
|
|
|
|
|
uint screenY = (r.screenSize & 2 ? 32 << 5 : 0);
|
|
|
|
|
if(r.screenSize == 3) screenY <<= 1;
|
|
|
|
|
|
|
|
|
|
x = (x & maskX) >> tileWidth;
|
|
|
|
|
y = (y & maskY) >> tileHeight;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v068r12 release.
(there was no r11 release posted to the WIP thread)
byuu says:
This took ten hours of mind boggling insanity to pull off.
It upgrades the S-PPU dot-based renderer to fetch one tile, and then
output all of its pixels before fetching again. It sounds easy enough,
but it's insanely difficult. I ended up taking one small shortcut, in
that rather than fetch at -7, I fetch at the first instance where a tile
is needed to plot to x=0. So if you have {-3 to +4 } as a tile, it
fetches at -3. That won't work so well on hardware, if two BGs fetch at
the same X offset, they won't have time.
I have had no luck staggering the reads at BG1=-7, BG3=-5, etc. While
I can shift and fetch just fine, what happens is that when a new tile is
fetched in, that gives a new palette, priority, etc; and this ends up
happening between two tiles which results in the right-most edges of the
screen ending up with the wrong colors and such.
Offset-per-tile is cheap as always. Although looking at it, I'm not sure
how BG3 could pre-fetch, especially with the way one or two OPT modes
can fetch two tiles.
There's no magic in Hoffset caching yet, so the SMW1 pixel issue is
still there.
Mode 7 got a bugfix, it was off-by-one horizontally from the mosaic
code. After re-designing the BG mosaic, I ended up needing a separate
mosaic for Mode7, and in the process I fixed that bug. The obvious
change is that the Chrono Trigger Mode7->Mode2 transition doesn't cause
the pendulum to jump anymore.
Windows were simplified just a tad. The range testing is shared for all
modes now. Ironically, it's a bit slower, but I'll take less code over
more speed for the accuracy core.
Speaking of speed, because there's so much less calculations per pixel
for BGs, performance for the entire emulator has gone up by 30% in the
accuracy core. Pretty neat overall, I can maintain 60fps in all but,
yeah you can guess can't you?
2010-09-04 03:36:03 +00:00
|
|
|
uint16 offset = ((y & 0x1f) << 5) + (x & 0x1f);
|
2016-06-14 10:51:54 +00:00
|
|
|
if(x & 0x20) offset += screenX;
|
|
|
|
|
if(y & 0x20) offset += screenY;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
2016-06-24 12:16:53 +00:00
|
|
|
uint16 address = r.screenAddress + offset;
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
return ppu.vram[address];
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|