bsnes/purify/nall/string/core.hpp

172 lines
3.7 KiB
C++
Raw Normal View History

#ifdef NALL_STRING_INTERNAL_HPP
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
namespace nall {
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
static void istring(string &output) {
}
template<typename T, typename... Args>
static void istring(string &output, const T &value, Args&&... args) {
output.append_(make_string(value));
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
istring(output, std::forward<Args>(args)...);
}
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void string::reserve(unsigned size_) {
if(size_ > size) {
size = size_;
data = (char*)realloc(data, size + 1);
data[size] = 0;
}
}
bool string::empty() const {
return !*data;
}
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
template<typename... Args> string& string::assign(Args&&... args) {
*data = 0;
istring(*this, std::forward<Args>(args)...);
return *this;
}
template<typename... Args> string& string::append(Args&&... args) {
istring(*this, std::forward<Args>(args)...);
return *this;
}
string& string::assign_(const char *s) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
unsigned length = strlen(s);
reserve(length);
strcpy(data, s);
return *this;
}
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
string& string::append_(const char *s) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
unsigned length = strlen(data) + strlen(s);
reserve(length);
strcat(data, s);
return *this;
}
string::operator const char*() const {
return data;
}
char* string::operator()() {
return data;
}
char& string::operator[](int index) {
reserve(index);
return data[index];
}
bool string::operator==(const char *str) const { return strcmp(data, str) == 0; }
bool string::operator!=(const char *str) const { return strcmp(data, str) != 0; }
bool string::operator< (const char *str) const { return strcmp(data, str) < 0; }
bool string::operator<=(const char *str) const { return strcmp(data, str) <= 0; }
bool string::operator> (const char *str) const { return strcmp(data, str) > 0; }
bool string::operator>=(const char *str) const { return strcmp(data, str) >= 0; }
string& string::operator=(const string &value) {
if(&value == this) return *this;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
assign(value);
return *this;
}
string& string::operator=(string &&source) {
if(&source == this) return *this;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
if(data) free(data);
size = source.size;
data = source.data;
source.data = nullptr;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
source.size = 0;
return *this;
}
template<typename... Args> string::string(Args&&... args) {
size = 64;
data = (char*)malloc(size + 1);
*data = 0;
istring(*this, std::forward<Args>(args)...);
}
string::string(const string &value) {
if(&value == this) return;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
size = strlen(value);
data = strdup(value);
}
string::string(string &&source) {
if(&source == this) return;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
size = source.size;
data = source.data;
source.data = nullptr;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
string::~string() {
if(data) free(data);
}
bool string::readfile(const string &filename) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
assign("");
#if !defined(_WIN32)
FILE *fp = fopen(filename, "rb");
#else
FILE *fp = _wfopen(utf16_t(filename), L"rb");
#endif
if(!fp) return false;
fseek(fp, 0, SEEK_END);
unsigned size = ftell(fp);
rewind(fp);
char *fdata = new char[size + 1];
unsigned unused = fread(fdata, 1, size, fp);
fclose(fp);
fdata[size] = 0;
assign(fdata);
delete[] fdata;
return true;
}
optional<unsigned> lstring::find(const char *key) const {
for(unsigned i = 0; i < size(); i++) {
if(operator[](i) == key) return { true, i };
}
return { false, 0 };
}
string lstring::concatenate(const char *separator) const {
string output;
for(unsigned i = 0; i < size(); i++) {
output.append(operator[](i), i < size() - 1 ? separator : "");
}
return output;
}
bool lstring::operator==(const lstring &source) const {
if(this == &source) return true;
if(size() != source.size()) return false;
for(unsigned n = 0; n < size(); n++) {
if(operator[](n) != source[n]) return false;
}
return true;
}
bool lstring::operator!=(const lstring &source) const {
return !operator==(source);
}
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
inline lstring::lstring() {
}
inline lstring::lstring(std::initializer_list<string> list) {
for(auto &data : list) append(data);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
}
#endif