bsnes/purify/phoenix/gtk/platform.hpp

495 lines
12 KiB
C++
Raw Normal View History

struct Settings : public configuration {
bidirectional_map<Keyboard::Scancode, unsigned> keymap;
unsigned frameGeometryX;
unsigned frameGeometryY;
unsigned frameGeometryWidth;
unsigned frameGeometryHeight;
unsigned menuGeometryHeight;
unsigned statusGeometryHeight;
unsigned windowBackgroundColor;
void load();
void save();
Settings();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pWindow;
struct pMenu;
struct pLayout;
struct pWidget;
struct pFont {
static Geometry geometry(const string &description, const string &text);
static PangoFontDescription* create(const string &description);
static void free(PangoFontDescription *font);
static Geometry geometry(PangoFontDescription *font, const string &text);
static void setFont(GtkWidget *widget, const string &font);
static void setFont(GtkWidget *widget, gpointer font);
};
struct pDesktop {
static Size size();
static Geometry workspace();
};
struct pKeyboard {
static bool pressed(Keyboard::Scancode scancode);
static array<bool> state();
static void initialize();
};
struct pMouse {
static Position position();
static bool pressed(Mouse::Button button);
};
struct pDialogWindow {
static string fileOpen(Window &parent, const string &path, const lstring &filter);
static string fileSave(Window &parent, const string &path, const lstring &filter);
static string folderSelect(Window &parent, const string &path);
};
struct pMessageWindow {
static MessageWindow::Response information(Window &parent, const string &text, MessageWindow::Buttons buttons);
static MessageWindow::Response question(Window &parent, const string &text, MessageWindow::Buttons buttons);
static MessageWindow::Response warning(Window &parent, const string &text, MessageWindow::Buttons buttons);
static MessageWindow::Response critical(Window &parent, const string &text, MessageWindow::Buttons buttons);
};
struct pObject {
Object &object;
bool locked;
pObject(Object &object) : object(object), locked(false) {}
virtual ~pObject() {}
void constructor() {}
void destructor() {}
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pOS : public pObject {
static XlibDisplay *display;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
static Font defaultFont;
static void main();
static bool pendingEvents();
static void processEvents();
static void quit();
static void initialize();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pTimer : public pObject {
Timer &timer;
void setEnabled(bool enabled);
void setInterval(unsigned milliseconds);
pTimer(Timer &timer) : pObject(timer), timer(timer) {}
void constructor();
};
struct pWindow : public pObject {
Window &window;
GtkWidget *widget;
GtkWidget *menuContainer;
GtkWidget *formContainer;
GtkWidget *statusContainer;
GtkWidget *menu;
GtkWidget *status;
GtkAllocation lastAllocation;
bool onSizePending;
void append(Layout &layout);
void append(Menu &menu);
void append(Widget &widget);
Color backgroundColor();
bool focused();
Geometry frameMargin();
Geometry geometry();
void remove(Layout &layout);
void remove(Menu &menu);
void remove(Widget &widget);
void setBackgroundColor(const Color &color);
void setFocused();
void setFullScreen(bool fullScreen);
void setGeometry(const Geometry &geometry);
void setMenuFont(const string &font);
void setMenuVisible(bool visible);
void setResizable(bool resizable);
void setStatusFont(const string &font);
void setStatusText(const string &text);
void setStatusVisible(bool visible);
void setTitle(const string &text);
void setVisible(bool visible);
void setWidgetFont(const string &font);
pWindow(Window &window) : pObject(window), window(window) {}
void constructor();
unsigned menuHeight();
unsigned statusHeight();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pAction : public pObject {
Action &action;
GtkWidget *widget;
void setEnabled(bool enabled);
void setVisible(bool visible);
pAction(Action &action) : pObject(action), action(action) {}
void constructor();
virtual void orphan();
string mnemonic(string text);
virtual void setFont(const string &font);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pMenu : public pAction {
Menu &menu;
GtkWidget *gtkMenu;
void append(Action &action);
void remove(Action &action);
void setImage(const image &image);
void setText(const string &text);
pMenu(Menu &menu) : pAction(menu), menu(menu) {}
void constructor();
void destructor();
void orphan();
void setFont(const string &font);
};
struct pSeparator : public pAction {
Separator &separator;
pSeparator(Separator &separator) : pAction(separator), separator(separator) {}
void constructor();
void destructor();
void orphan();
};
struct pItem : public pAction {
Item &item;
void setImage(const image &image);
void setText(const string &text);
pItem(Item &item) : pAction(item), item(item) {}
void constructor();
void destructor();
void orphan();
};
struct pCheckItem : public pAction {
CheckItem &checkItem;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool checked();
void setChecked(bool checked);
void setText(const string &text);
pCheckItem(CheckItem &checkItem) : pAction(checkItem), checkItem(checkItem) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pRadioItem : public pAction {
RadioItem &radioItem;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool checked();
void setChecked();
void setGroup(const array<RadioItem&> &group);
void setText(const string &text);
pRadioItem(RadioItem &radioItem) : pAction(radioItem), radioItem(radioItem) {}
void constructor();
void destructor();
void orphan();
};
struct pSizable : public pObject {
Sizable &sizable;
pSizable(Sizable &sizable) : pObject(sizable), sizable(sizable) {}
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pLayout : public pSizable {
Layout &layout;
pLayout(Layout &layout) : pSizable(layout), layout(layout) {}
};
struct pWidget : public pSizable {
Widget &widget;
GtkWidget *gtkWidget;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool enabled();
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
virtual Geometry minimumGeometry();
void setEnabled(bool enabled);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
virtual void setFocused();
virtual void setFont(const string &font);
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
virtual void setGeometry(const Geometry &geometry);
void setVisible(bool visible);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
pWidget(Widget &widget) : pSizable(widget), widget(widget) {}
void constructor();
void destructor();
virtual void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pButton : public pWidget {
Button &button;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
void setImage(const image &image, Orientation orientation);
void setText(const string &text);
pButton(Button &button) : pWidget(button), button(button) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
struct pCanvas : public pWidget {
Canvas &canvas;
cairo_surface_t *surface;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
void setSize(const Size &size);
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
void update();
pCanvas(Canvas &canvas) : pWidget(canvas), canvas(canvas) {}
void constructor();
void destructor();
void orphan();
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
};
struct pCheckBox : public pWidget {
CheckBox &checkBox;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool checked();
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
void setChecked(bool checked);
void setText(const string &text);
pCheckBox(CheckBox &checkBox) : pWidget(checkBox), checkBox(checkBox) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pComboBox : public pWidget {
ComboBox &comboBox;
unsigned itemCounter;
void append(const string &text);
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void reset();
unsigned selection();
void setSelection(unsigned row);
pComboBox(ComboBox &comboBox) : pWidget(comboBox), comboBox(comboBox) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pHexEdit : public pWidget {
HexEdit &hexEdit;
GtkWidget *container;
GtkWidget *subWidget;
GtkWidget *scrollBar;
GtkTextBuffer *textBuffer;
GtkTextMark *textCursor;
void setColumns(unsigned columns);
void setLength(unsigned length);
void setOffset(unsigned offset);
void setRows(unsigned rows);
void update();
pHexEdit(HexEdit &hexEdit) : pWidget(hexEdit), hexEdit(hexEdit) {}
void constructor();
void destructor();
void orphan();
unsigned cursorPosition();
bool keyPress(unsigned scancode);
void scroll(unsigned position);
void setCursorPosition(unsigned position);
void setScroll();
void updateScroll();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pHorizontalScrollBar : public pWidget {
HorizontalScrollBar &horizontalScrollBar;
Geometry minimumGeometry();
unsigned position();
void setLength(unsigned length);
void setPosition(unsigned position);
pHorizontalScrollBar(HorizontalScrollBar &horizontalScrollBar) : pWidget(horizontalScrollBar), horizontalScrollBar(horizontalScrollBar) {}
void constructor();
void destructor();
void orphan();
};
struct pHorizontalSlider : public pWidget {
HorizontalSlider &horizontalSlider;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
unsigned position();
void setLength(unsigned length);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void setPosition(unsigned position);
pHorizontalSlider(HorizontalSlider &horizontalSlider) : pWidget(horizontalSlider), horizontalSlider(horizontalSlider) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pLabel : public pWidget {
Label &label;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
void setText(const string &text);
pLabel(Label &label) : pWidget(label), label(label) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pLineEdit : public pWidget {
LineEdit &lineEdit;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
void setEditable(bool editable);
void setText(const string &text);
string text();
pLineEdit(LineEdit &lineEdit) : pWidget(lineEdit), lineEdit(lineEdit) {}
void constructor();
void destructor();
void orphan();
};
struct pListView : public pWidget {
ListView &listView;
GtkWidget *subWidget;
GtkListStore *store;
struct GtkColumn {
GtkCellRenderer *renderer;
GtkTreeViewColumn *column;
GtkWidget *label;
};
linear_vector<GtkColumn> column;
void append(const lstring &text);
void autoSizeColumns();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool checked(unsigned row);
void modify(unsigned row, const lstring &text);
void reset();
bool selected();
unsigned selection();
void setCheckable(bool checkable);
void setChecked(unsigned row, bool checked);
void setHeaderText(const lstring &text);
void setHeaderVisible(bool visible);
void setSelected(bool selected);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void setSelection(unsigned row);
pListView(ListView &listView) : pWidget(listView), listView(listView) {}
void constructor();
void destructor();
void orphan();
void setFocused();
void setFont(const string &font);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pProgressBar : public pWidget {
ProgressBar &progressBar;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void setPosition(unsigned position);
pProgressBar(ProgressBar &progressBar) : pWidget(progressBar), progressBar(progressBar) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pRadioBox : public pWidget {
RadioBox &radioBox;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
bool checked();
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void setChecked();
void setGroup(const array<RadioBox&> &group);
void setText(const string &text);
pRadioBox(RadioBox &radioBox) : pWidget(radioBox), radioBox(radioBox) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pTextEdit : public pWidget {
TextEdit &textEdit;
GtkWidget *subWidget;
GtkTextBuffer *textBuffer;
void setCursorPosition(unsigned position);
void setEditable(bool editable);
void setText(const string &text);
void setWordWrap(bool wordWrap);
string text();
pTextEdit(TextEdit &textEdit) : pWidget(textEdit), textEdit(textEdit) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pVerticalScrollBar : public pWidget {
VerticalScrollBar &verticalScrollBar;
Geometry minimumGeometry();
unsigned position();
void setLength(unsigned length);
void setPosition(unsigned position);
pVerticalScrollBar(VerticalScrollBar &verticalScrollBar) : pWidget(verticalScrollBar), verticalScrollBar(verticalScrollBar) {}
void constructor();
void destructor();
void orphan();
};
struct pVerticalSlider : public pWidget {
VerticalSlider &verticalSlider;
Update to v078 release. byuu says: Finally, a new release. I have been very busy finishing up SNES box, cartridge and PCB scanning plus cataloguing the data, however this release still has some significant improvements. Most notably would be randomization on startup. This will help match the behavior of real hardware and uninitialized memory + registers. It should help catch homebrew software that forgets to initialize things properly. Of course, I was not able to test the complete library, so it is possible that if I've randomized anything that should be constant, that this could cause a regression. You can disable this randomization for netplay or to work around any incompatibilities by editing bsnes.cfg and setting snes.random to false. The GUI also received some updates. Widget sizes are now computed based on font sizes, giving it a perfectly native look (because it is native.) I've also added a hotkey remapping screen to the input settings. Not only can you remap inputs to controllers now, but those who did not know the hotkey bindings can now quickly see which ones exist and what they are mapped to. Changelog (since v077): - memory and most registers are now randomly initialized on power-up - fixed auto joypad polling issue in Super Star Wars - fixed .nec and .rtc file extensions (they were missing the dot) [krom] - PPU/accuracy now clears overscan region on any frame when it is disabled - PPU/compatibility no longer auto-blends hires pixels (use NTSC filter for this) - added hotkey remapping dialog to input settings window - added a few new hotkeys, including quick-reset - phoenix API now auto-sizes widgets based on font sizes - file dialog once again remembers previously selected file when possible
2011-04-30 13:12:15 +00:00
Geometry minimumGeometry();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
unsigned position();
void setLength(unsigned length);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
void setPosition(unsigned position);
pVerticalSlider(VerticalSlider &verticalSlider) : pWidget(verticalSlider), verticalSlider(verticalSlider) {}
void constructor();
void destructor();
void orphan();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
};
struct pViewport : public pWidget {
Viewport &viewport;
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
uintptr_t handle();
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
pViewport(Viewport &viewport) : pWidget(viewport), viewport(viewport) {}
void constructor();
void destructor();
void orphan();
};