ShuriZma
/
bsnes
mirror of https://github.com/bsnes-emu/bsnes.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
bsnes/higan/processor/hg51b/registers.cpp

79 lines
2.4 KiB
C++
Raw Normal View History

Update to v087r08 release. byuu says: Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr 000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write(). Also moved the Hitachi HG51B core to processor/, and split it apart from the snes/chip/hitachidsp implementation. This one actually worked really well. Very clean split between MMIO/DMA and the processor core. I may move a more generic DMA function inside the core, not sure yet. I still believe the HG51B169 to be a variant of the HG51BS family, but given they're meant to be incredibly flexible microcontrollers, it's possible that each variant gets its own instruction set. So, who knows. We'll worry about it if we ever find another HG51B DSP, I guess. GBA BIOS is constantly reading from 04000300, but it never writes. If I return prng()&1, I can get it to proceed until it hits a bad opcode (stc opcode, which the GBA lacks a coprocessor so ... bad codepath.) Without it, it just reads that register forever and keeps resetting the system, or something ... I guess we're going to have to try and get ARMwrestler working, because the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
#ifdef PROCESSOR_HG51B_HPP
Update to v079r04 release. byuu says: Back from vacation. We were successful in emulating the Cx4 using LLE during my vacation. We finished on June 15th. And now that I'm back, I've rewritten the code and merged it into bsnes official. With that, the very last HLE emulation code in bsnes has now been purged. [...] The emulation is as minimal as possible. If I don't see an opcode or feature actually used, I don't implement it. The one exception being that I do support the vector override functionality. And there are also dummy handlers for ld ?,$2e + loop, so that the chip won't stall out. But things like "byte 4" on rdram/wrram, the two-bit destination selections for all but ld, etc are treated as invalid opcodes, since we aren't 100% sure if they are there and work as we hypothesize. I also only map in known registers into the 256-entry register list. This leaves 90% of the map empty. The chip runs at 20MHz, and it will disable the ROM while running. DMA does transfer one byte at a time against the clock and also locks out the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only reads from ROM, and only writes to RAM. Unless someone verifies that they can do more, I'll leave it that way. I don't yet actually buffer the program ROM into the internal program RAM just yet, but that is on the to-do list. We aren't entirely sure how that works either, but my plan is to just lock the Cx4 CPU and load in 512-bytes. There's still a few unknown registers in $7f40-5f that I don't do anything with yet. The secondary chip disable is going to be the weirdest one, since MMX3 only has one chip. I'd really rather not have to specify the ROM mapping as two separate chips on MMX2 and as one on MMX3 just to support this, so I don't know yet. Save state support is of course there already. Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto HG51B::reg_read(uint8 addr) const -> uint24 {
Update to v087r08 release. byuu says: Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr 000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write(). Also moved the Hitachi HG51B core to processor/, and split it apart from the snes/chip/hitachidsp implementation. This one actually worked really well. Very clean split between MMIO/DMA and the processor core. I may move a more generic DMA function inside the core, not sure yet. I still believe the HG51B169 to be a variant of the HG51BS family, but given they're meant to be incredibly flexible microcontrollers, it's possible that each variant gets its own instruction set. So, who knows. We'll worry about it if we ever find another HG51B DSP, I guess. GBA BIOS is constantly reading from 04000300, but it never writes. If I return prng()&1, I can get it to proceed until it hits a bad opcode (stc opcode, which the GBA lacks a coprocessor so ... bad codepath.) Without it, it just reads that register forever and keeps resetting the system, or something ... I guess we're going to have to try and get ARMwrestler working, because the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
switch(addr) {
Update to v079r04 release. byuu says: Back from vacation. We were successful in emulating the Cx4 using LLE during my vacation. We finished on June 15th. And now that I'm back, I've rewritten the code and merged it into bsnes official. With that, the very last HLE emulation code in bsnes has now been purged. [...] The emulation is as minimal as possible. If I don't see an opcode or feature actually used, I don't implement it. The one exception being that I do support the vector override functionality. And there are also dummy handlers for ld ?,$2e + loop, so that the chip won't stall out. But things like "byte 4" on rdram/wrram, the two-bit destination selections for all but ld, etc are treated as invalid opcodes, since we aren't 100% sure if they are there and work as we hypothesize. I also only map in known registers into the 256-entry register list. This leaves 90% of the map empty. The chip runs at 20MHz, and it will disable the ROM while running. DMA does transfer one byte at a time against the clock and also locks out the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only reads from ROM, and only writes to RAM. Unless someone verifies that they can do more, I'll leave it that way. I don't yet actually buffer the program ROM into the internal program RAM just yet, but that is on the to-do list. We aren't entirely sure how that works either, but my plan is to just lock the Cx4 CPU and load in 512-bytes. There's still a few unknown registers in $7f40-5f that I don't do anything with yet. The secondary chip disable is going to be the weirdest one, since MMX3 only has one chip. I'd really rather not have to specify the ROM mapping as two separate chips on MMX2 and as one on MMX3 just to support this, so I don't know yet. Save state support is of course there already. Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
case 0x00: return regs.a;
case 0x01: return regs.acch;
case 0x02: return regs.accl;
case 0x03: return regs.busdata;
case 0x08: return regs.romdata;
case 0x0c: return regs.ramdata;
case 0x13: return regs.busaddr;
case 0x1c: return regs.ramaddr;
case 0x50: return 0x000000;
case 0x51: return 0xffffff;
case 0x52: return 0x00ff00;
case 0x53: return 0xff0000;
case 0x54: return 0x00ffff;
case 0x55: return 0xffff00;
case 0x56: return 0x800000;
case 0x57: return 0x7fffff;
case 0x58: return 0x008000;
case 0x59: return 0x007fff;
case 0x5a: return 0xff7fff;
case 0x5b: return 0xffff7f;
case 0x5c: return 0x010000;
case 0x5d: return 0xfeffff;
case 0x5e: return 0x000100;
case 0x5f: return 0x00feff;
case 0x60: return regs.gpr[ 0];
case 0x61: return regs.gpr[ 1];
case 0x62: return regs.gpr[ 2];
case 0x63: return regs.gpr[ 3];
case 0x64: return regs.gpr[ 4];
case 0x65: return regs.gpr[ 5];
case 0x66: return regs.gpr[ 6];
case 0x67: return regs.gpr[ 7];
case 0x68: return regs.gpr[ 8];
case 0x69: return regs.gpr[ 9];
case 0x6a: return regs.gpr[10];
case 0x6b: return regs.gpr[11];
case 0x6c: return regs.gpr[12];
case 0x6d: return regs.gpr[13];
case 0x6e: return regs.gpr[14];
case 0x6f: return regs.gpr[15];
}
return 0x000000;
}
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto HG51B::reg_write(uint8 addr, uint24 data) -> void {
Update to v087r08 release. byuu says: Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr 000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write(). Also moved the Hitachi HG51B core to processor/, and split it apart from the snes/chip/hitachidsp implementation. This one actually worked really well. Very clean split between MMIO/DMA and the processor core. I may move a more generic DMA function inside the core, not sure yet. I still believe the HG51B169 to be a variant of the HG51BS family, but given they're meant to be incredibly flexible microcontrollers, it's possible that each variant gets its own instruction set. So, who knows. We'll worry about it if we ever find another HG51B DSP, I guess. GBA BIOS is constantly reading from 04000300, but it never writes. If I return prng()&1, I can get it to proceed until it hits a bad opcode (stc opcode, which the GBA lacks a coprocessor so ... bad codepath.) Without it, it just reads that register forever and keeps resetting the system, or something ... I guess we're going to have to try and get ARMwrestler working, because the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
switch(addr) {
Update to v079r04 release. byuu says: Back from vacation. We were successful in emulating the Cx4 using LLE during my vacation. We finished on June 15th. And now that I'm back, I've rewritten the code and merged it into bsnes official. With that, the very last HLE emulation code in bsnes has now been purged. [...] The emulation is as minimal as possible. If I don't see an opcode or feature actually used, I don't implement it. The one exception being that I do support the vector override functionality. And there are also dummy handlers for ld ?,$2e + loop, so that the chip won't stall out. But things like "byte 4" on rdram/wrram, the two-bit destination selections for all but ld, etc are treated as invalid opcodes, since we aren't 100% sure if they are there and work as we hypothesize. I also only map in known registers into the 256-entry register list. This leaves 90% of the map empty. The chip runs at 20MHz, and it will disable the ROM while running. DMA does transfer one byte at a time against the clock and also locks out the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only reads from ROM, and only writes to RAM. Unless someone verifies that they can do more, I'll leave it that way. I don't yet actually buffer the program ROM into the internal program RAM just yet, but that is on the to-do list. We aren't entirely sure how that works either, but my plan is to just lock the Cx4 CPU and load in 512-bytes. There's still a few unknown registers in $7f40-5f that I don't do anything with yet. The secondary chip disable is going to be the weirdest one, since MMX3 only has one chip. I'd really rather not have to specify the ROM mapping as two separate chips on MMX2 and as one on MMX3 just to support this, so I don't know yet. Save state support is of course there already. Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
2011-06-22 13:27:55 +00:00
case 0x00: regs.a = data; return;
case 0x01: regs.acch = data; return;
case 0x02: regs.accl = data; return;
case 0x03: regs.busdata = data; return;
case 0x08: regs.romdata = data; return;
case 0x0c: regs.ramdata = data; return;
case 0x13: regs.busaddr = data; return;
case 0x1c: regs.ramaddr = data; return;
case 0x60: regs.gpr[ 0] = data; return;
case 0x61: regs.gpr[ 1] = data; return;
case 0x62: regs.gpr[ 2] = data; return;
case 0x63: regs.gpr[ 3] = data; return;
case 0x64: regs.gpr[ 4] = data; return;
case 0x65: regs.gpr[ 5] = data; return;
case 0x66: regs.gpr[ 6] = data; return;
case 0x67: regs.gpr[ 7] = data; return;
case 0x68: regs.gpr[ 8] = data; return;
case 0x69: regs.gpr[ 9] = data; return;
case 0x6a: regs.gpr[10] = data; return;
case 0x6b: regs.gpr[11] = data; return;
case 0x6c: regs.gpr[12] = data; return;
case 0x6d: regs.gpr[13] = data; return;
case 0x6e: regs.gpr[14] = data; return;
case 0x6f: regs.gpr[15] = data; return;
}
}
#endif