2017-01-16 21:02:56 +00:00
|
|
|
auto VDC::DMA::step(uint clocks) -> void {
|
|
|
|
while(clocks--) {
|
|
|
|
if(vramActive) {
|
Update to v102r03 release.
byuu says:
Changelog:
- PCE: split VCE from VDC
- HuC6280: changed bus from (uint21 addr) to (uint8 bank, uint13 addr)
- added SuperGrafx emulation (adds secondary VDC, plus new VPC)
The VDC now has no concept of the actual display raster timing, and
instead is driven by Vpulse (start of frame) and Hpulse (start of
scanline) signals from the VCE. One still can't render the start of the
next scanline onto the current scanline through overly aggressive
timings, but it shouldn't be too much more difficult to allow that to
occur now. This process incurs quite a major speed hit, so low-end
systems with Atom CPUs can't run things at 60fps anymore.
The timing needs a lot of work. The pixels end up very jagged if the VCE
doesn't output batches of 2-4 pixels at a time. But this should not be a
requirement at all, so I'm not sure what's going wrong there.
Yo, Bro and the 512-width mode of TV Sports Basketball is now broken as
a result of these changes, and I'm not sure why.
To load SuperGrafx games, you're going to have to change the .pce
extensions to .sg or .sgx. Or you can manually move the games from the
PC Engine folder to the SuperGrafx folder and change the game folder
extensions. I have no way to tell the games apart. Mednafen uses CRC32
comparisons, and I may consider that since there's only five games, but
I'm not sure yet.
The only SuperGrafx game that's playable right now is Aldynes. And the
priorities are all screwed up. I don't understand how the windows or the
priorities work at all from sgxtech.txt, so ... yeah. It's pretty
broken, but it's a start.
I could really use some help with this, as I'm very lost right now with
rendering :/
-----
Note that the SuperGrafx is technically its own system, it's not an
add-on.
As such, I'm giving it a separate .sys folder, and a separate library.
There's debate over how to name this thing. "SuperGrafx" appears more
popular than "Super Grafx". And you might also call it the "PC Engine
SuperGrafx", but I decided to leave off the prefix so it appears more
distinct.
2017-01-23 21:18:54 +00:00
|
|
|
uint16 data = vdc->vram.read(source);
|
|
|
|
vdc->vram.write(target, data);
|
2017-01-16 21:02:56 +00:00
|
|
|
sourceIncrementMode == 0 ? source++ : source--;
|
|
|
|
targetIncrementMode == 0 ? target++ : target--;
|
|
|
|
if(!--length) {
|
|
|
|
vramActive = false;
|
Update to v102r03 release.
byuu says:
Changelog:
- PCE: split VCE from VDC
- HuC6280: changed bus from (uint21 addr) to (uint8 bank, uint13 addr)
- added SuperGrafx emulation (adds secondary VDC, plus new VPC)
The VDC now has no concept of the actual display raster timing, and
instead is driven by Vpulse (start of frame) and Hpulse (start of
scanline) signals from the VCE. One still can't render the start of the
next scanline onto the current scanline through overly aggressive
timings, but it shouldn't be too much more difficult to allow that to
occur now. This process incurs quite a major speed hit, so low-end
systems with Atom CPUs can't run things at 60fps anymore.
The timing needs a lot of work. The pixels end up very jagged if the VCE
doesn't output batches of 2-4 pixels at a time. But this should not be a
requirement at all, so I'm not sure what's going wrong there.
Yo, Bro and the 512-width mode of TV Sports Basketball is now broken as
a result of these changes, and I'm not sure why.
To load SuperGrafx games, you're going to have to change the .pce
extensions to .sg or .sgx. Or you can manually move the games from the
PC Engine folder to the SuperGrafx folder and change the game folder
extensions. I have no way to tell the games apart. Mednafen uses CRC32
comparisons, and I may consider that since there's only five games, but
I'm not sure yet.
The only SuperGrafx game that's playable right now is Aldynes. And the
priorities are all screwed up. I don't understand how the windows or the
priorities work at all from sgxtech.txt, so ... yeah. It's pretty
broken, but it's a start.
I could really use some help with this, as I'm very lost right now with
rendering :/
-----
Note that the SuperGrafx is technically its own system, it's not an
add-on.
As such, I'm giving it a separate .sys folder, and a separate library.
There's debate over how to name this thing. "SuperGrafx" appears more
popular than "Super Grafx". And you might also call it the "PC Engine
SuperGrafx", but I decided to leave off the prefix so it appears more
distinct.
2017-01-23 21:18:54 +00:00
|
|
|
vdc->irq.raise(VDC::IRQ::Line::TransferVRAM);
|
2017-01-16 21:02:56 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if(satbActive) {
|
Update to v102r03 release.
byuu says:
Changelog:
- PCE: split VCE from VDC
- HuC6280: changed bus from (uint21 addr) to (uint8 bank, uint13 addr)
- added SuperGrafx emulation (adds secondary VDC, plus new VPC)
The VDC now has no concept of the actual display raster timing, and
instead is driven by Vpulse (start of frame) and Hpulse (start of
scanline) signals from the VCE. One still can't render the start of the
next scanline onto the current scanline through overly aggressive
timings, but it shouldn't be too much more difficult to allow that to
occur now. This process incurs quite a major speed hit, so low-end
systems with Atom CPUs can't run things at 60fps anymore.
The timing needs a lot of work. The pixels end up very jagged if the VCE
doesn't output batches of 2-4 pixels at a time. But this should not be a
requirement at all, so I'm not sure what's going wrong there.
Yo, Bro and the 512-width mode of TV Sports Basketball is now broken as
a result of these changes, and I'm not sure why.
To load SuperGrafx games, you're going to have to change the .pce
extensions to .sg or .sgx. Or you can manually move the games from the
PC Engine folder to the SuperGrafx folder and change the game folder
extensions. I have no way to tell the games apart. Mednafen uses CRC32
comparisons, and I may consider that since there's only five games, but
I'm not sure yet.
The only SuperGrafx game that's playable right now is Aldynes. And the
priorities are all screwed up. I don't understand how the windows or the
priorities work at all from sgxtech.txt, so ... yeah. It's pretty
broken, but it's a start.
I could really use some help with this, as I'm very lost right now with
rendering :/
-----
Note that the SuperGrafx is technically its own system, it's not an
add-on.
As such, I'm giving it a separate .sys folder, and a separate library.
There's debate over how to name this thing. "SuperGrafx" appears more
popular than "Super Grafx". And you might also call it the "PC Engine
SuperGrafx", but I decided to leave off the prefix so it appears more
distinct.
2017-01-23 21:18:54 +00:00
|
|
|
uint16 data = vdc->vram.read(satbSource + satbOffset);
|
|
|
|
vdc->satb.write(satbOffset, data);
|
Update to v101r35 release.
byuu says:
Changelog:
- PCE: added 384KB HuCard ROM mirroring mode
- PCE: corrected D-pad polling order
- PCE: corrected palette color ordering (GRB, not RGB -- yes,
seriously)
- PCE: corrected SATB DMA -- should write to SATB, not to VRAM
- PCE: broke out Background, Sprite VDC settings to separate
subclasses
- PCE: emulated VDC backgrounds
- PCE: emulated VDC sprites
- PCE: emulated VDC sprite overflow, collision interrupts
- HuC6280: fixed disassembler output for STi instructions
- HuC6280: added missing LastCycle check to interrupt()
- HuC6280: fixed BIT, CMP, CPX, CPY, TRB, TSB, TST flag testing and
result
- HuC6280: added extra cycle delays to the block move instructions
- HuC6280: fixed ordering for flag set/clear instructions (happens
after LastCycle check)
- HuC6280: removed extra cycle from immediate instructions
- HuC6280: fixed indirectLoad, indirectYStore absolute addressing
- HuC6280: fixed BBR, BBS zeropage value testing
- HuC6280: fixed stack push/pull direction
Neutopia looks okay until the main title screen, then there's some
gibberish on the bottom. The game also locks up with some gibberish once
you actually start a new game. So, still not playable just yet =(
2017-01-19 08:38:57 +00:00
|
|
|
if(++satbOffset == 256) {
|
2017-01-16 21:02:56 +00:00
|
|
|
satbActive = false;
|
Update to v101r35 release.
byuu says:
Changelog:
- PCE: added 384KB HuCard ROM mirroring mode
- PCE: corrected D-pad polling order
- PCE: corrected palette color ordering (GRB, not RGB -- yes,
seriously)
- PCE: corrected SATB DMA -- should write to SATB, not to VRAM
- PCE: broke out Background, Sprite VDC settings to separate
subclasses
- PCE: emulated VDC backgrounds
- PCE: emulated VDC sprites
- PCE: emulated VDC sprite overflow, collision interrupts
- HuC6280: fixed disassembler output for STi instructions
- HuC6280: added missing LastCycle check to interrupt()
- HuC6280: fixed BIT, CMP, CPX, CPY, TRB, TSB, TST flag testing and
result
- HuC6280: added extra cycle delays to the block move instructions
- HuC6280: fixed ordering for flag set/clear instructions (happens
after LastCycle check)
- HuC6280: removed extra cycle from immediate instructions
- HuC6280: fixed indirectLoad, indirectYStore absolute addressing
- HuC6280: fixed BBR, BBS zeropage value testing
- HuC6280: fixed stack push/pull direction
Neutopia looks okay until the main title screen, then there's some
gibberish on the bottom. The game also locks up with some gibberish once
you actually start a new game. So, still not playable just yet =(
2017-01-19 08:38:57 +00:00
|
|
|
satbOffset = 0;
|
2017-01-16 21:02:56 +00:00
|
|
|
satbPending = satbRepeat;
|
Update to v102r03 release.
byuu says:
Changelog:
- PCE: split VCE from VDC
- HuC6280: changed bus from (uint21 addr) to (uint8 bank, uint13 addr)
- added SuperGrafx emulation (adds secondary VDC, plus new VPC)
The VDC now has no concept of the actual display raster timing, and
instead is driven by Vpulse (start of frame) and Hpulse (start of
scanline) signals from the VCE. One still can't render the start of the
next scanline onto the current scanline through overly aggressive
timings, but it shouldn't be too much more difficult to allow that to
occur now. This process incurs quite a major speed hit, so low-end
systems with Atom CPUs can't run things at 60fps anymore.
The timing needs a lot of work. The pixels end up very jagged if the VCE
doesn't output batches of 2-4 pixels at a time. But this should not be a
requirement at all, so I'm not sure what's going wrong there.
Yo, Bro and the 512-width mode of TV Sports Basketball is now broken as
a result of these changes, and I'm not sure why.
To load SuperGrafx games, you're going to have to change the .pce
extensions to .sg or .sgx. Or you can manually move the games from the
PC Engine folder to the SuperGrafx folder and change the game folder
extensions. I have no way to tell the games apart. Mednafen uses CRC32
comparisons, and I may consider that since there's only five games, but
I'm not sure yet.
The only SuperGrafx game that's playable right now is Aldynes. And the
priorities are all screwed up. I don't understand how the windows or the
priorities work at all from sgxtech.txt, so ... yeah. It's pretty
broken, but it's a start.
I could really use some help with this, as I'm very lost right now with
rendering :/
-----
Note that the SuperGrafx is technically its own system, it's not an
add-on.
As such, I'm giving it a separate .sys folder, and a separate library.
There's debate over how to name this thing. "SuperGrafx" appears more
popular than "Super Grafx". And you might also call it the "PC Engine
SuperGrafx", but I decided to leave off the prefix so it appears more
distinct.
2017-01-23 21:18:54 +00:00
|
|
|
vdc->irq.raise(VDC::IRQ::Line::TransferSATB);
|
2017-01-16 21:02:56 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
auto VDC::DMA::vramStart() -> void {
|
|
|
|
vramActive = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
auto VDC::DMA::satbStart() -> void {
|
|
|
|
if(!satbPending) return;
|
|
|
|
satbActive = true;
|
Update to v101r35 release.
byuu says:
Changelog:
- PCE: added 384KB HuCard ROM mirroring mode
- PCE: corrected D-pad polling order
- PCE: corrected palette color ordering (GRB, not RGB -- yes,
seriously)
- PCE: corrected SATB DMA -- should write to SATB, not to VRAM
- PCE: broke out Background, Sprite VDC settings to separate
subclasses
- PCE: emulated VDC backgrounds
- PCE: emulated VDC sprites
- PCE: emulated VDC sprite overflow, collision interrupts
- HuC6280: fixed disassembler output for STi instructions
- HuC6280: added missing LastCycle check to interrupt()
- HuC6280: fixed BIT, CMP, CPX, CPY, TRB, TSB, TST flag testing and
result
- HuC6280: added extra cycle delays to the block move instructions
- HuC6280: fixed ordering for flag set/clear instructions (happens
after LastCycle check)
- HuC6280: removed extra cycle from immediate instructions
- HuC6280: fixed indirectLoad, indirectYStore absolute addressing
- HuC6280: fixed BBR, BBS zeropage value testing
- HuC6280: fixed stack push/pull direction
Neutopia looks okay until the main title screen, then there's some
gibberish on the bottom. The game also locks up with some gibberish once
you actually start a new game. So, still not playable just yet =(
2017-01-19 08:38:57 +00:00
|
|
|
satbOffset = 0;
|
2017-01-16 21:02:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
auto VDC::DMA::satbQueue() -> void {
|
|
|
|
satbPending = true;
|
|
|
|
}
|