Update to v094r20 release.
byuu says:
Main reason for this WIP was because of all the added lines to hiro for
selective component disabling. May as well get all the diff-noise apart
from code changes.
It also merges something I've been talking to Cydrak about ... making
nall::string::(integer,decimal) do built-in binary,octal,hex decoding
instead of just failing on those. This will have fun little side effects
all over the place, like being able to view a topic on my forum via
"forum.byuu.org/topic/0b10010110", heh.
There are two small changes to higan itself, though. First up, I fixed
the resampler ratio when loading non-SNES games. Tested and I can play
Game Boy games fine now. Second, I hooked up menu option hiding for
reset and controller selection. Right now, this works like higan v094,
but I'm thinking I might want to show the "Device -> Controller" even if
that's all that's there. It kind of jives nicer with the input settings
window to see the labels there, I think. And if we ever do add more
stuff, it'll be nice that people already always expect that menu there.
Remaining issues:
* add slotted cart loader (SGB, BSX, ST)
* add DIP switch selection window (NSS)
* add timing configuration (video/audio sync)
2015-05-23 05:37:08 +00:00
|
|
|
#if defined(Hiro_Timer)
|
|
|
|
|
Update to 20180809 release.
byuu says:
The Windows port can now run the emulation while navigating menus,
moving windows, and resizing windows. The main window also doesn't try
so hard to constantly clear itself. This may leave a bit of unwelcome
residue behind in some video drivers during resize, but under most
drivers, it lets you resize without a huge amount of flickering.
On all platforms, I now also run the emulation during MessageWindow
modal events, where I didn't before.
I'm thinking we should probably mute the audio during modal periods,
since it can generate a good deal of distortion.
The tooltip timeout was increased to ten seconds.
On Windows, the enter key can now activate buttons, so you can more
quickly dismiss MessageDialog windows. This part may not actually work
... I'm in the middle of trying to get messages out of the global
`Application_windowProc` hook and into the individual `Widget_windowProc`
hooks, so I need to do some testing.
I fixed a bug where changing the input driver wouldn't immediately
reload the input/hotkey settings lists properly.
I also went from disabling the driver "Change" button when the currently
active driver is selected in the list, to instead setting it to say
"Reload", and I also added a tool tip to the input driver reload button,
advising that if you're using DirectInput or SDL, you can hit "Reload"
to rescan for hotplugged gamepads without needing to restart the
emulator. XInput and udev have auto hotswap support. If we can ever get
that into DirectInput and SDL, then I'll remove the tooltip. But
regardless, the reload functionality is nice to have for all drivers.
I'm not sure what should happen when a user changes their driver
selection while a game is loaded, gets the warning dialog, chooses not
to change it, and then closes the emulator. Currently, it will make the
change happen the next time you start the emulator. This feels a bit
unexpected, but when you change the selection without a game loaded, it
takes immediate effect. So I'm not really sure what's best here.
2018-08-10 05:02:59 +00:00
|
|
|
mTimer::mTimer() {
|
|
|
|
mObject::state.enabled = false;
|
|
|
|
}
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
auto mTimer::allocate() -> pObject* {
|
|
|
|
return new pTimer(*this);
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
|
|
|
|
auto mTimer::doActivate() const -> void {
|
|
|
|
if(state.onActivate) return state.onActivate();
|
|
|
|
}
|
|
|
|
|
|
|
|
auto mTimer::interval() const -> unsigned {
|
|
|
|
return state.interval;
|
|
|
|
}
|
|
|
|
|
2015-06-15 22:16:43 +00:00
|
|
|
auto mTimer::onActivate(const function<void ()>& callback) -> type& {
|
|
|
|
state.onActivate = callback;
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
auto mTimer::setInterval(unsigned interval) -> type& {
|
|
|
|
state.interval = interval;
|
|
|
|
signal(setInterval, interval);
|
|
|
|
return *this;
|
|
|
|
}
|
Update to v094r20 release.
byuu says:
Main reason for this WIP was because of all the added lines to hiro for
selective component disabling. May as well get all the diff-noise apart
from code changes.
It also merges something I've been talking to Cydrak about ... making
nall::string::(integer,decimal) do built-in binary,octal,hex decoding
instead of just failing on those. This will have fun little side effects
all over the place, like being able to view a topic on my forum via
"forum.byuu.org/topic/0b10010110", heh.
There are two small changes to higan itself, though. First up, I fixed
the resampler ratio when loading non-SNES games. Tested and I can play
Game Boy games fine now. Second, I hooked up menu option hiding for
reset and controller selection. Right now, this works like higan v094,
but I'm thinking I might want to show the "Device -> Controller" even if
that's all that's there. It kind of jives nicer with the input settings
window to see the labels there, I think. And if we ever do add more
stuff, it'll be nice that people already always expect that menu there.
Remaining issues:
* add slotted cart loader (SGB, BSX, ST)
* add DIP switch selection window (NSS)
* add timing configuration (video/audio sync)
2015-05-23 05:37:08 +00:00
|
|
|
|
|
|
|
#endif
|