Wayland input driver was not selectable from menu. It could still be enforced by
context driver, or enabled in config file, but I saw no reason why it would be
better to skip it from here.
* Rewind during recording isn't visibly busted anymore but it doesn't rewind the replay properly during playback or record, inputs get clobbered; check frame pos/ptr stuff.
* Fix rewinding during movie recording and playback?
If cores are not deterministic, or if they only have bounded
determinism, we can obtain less drift if replay files also contain
periodic checkpoint states. These are configured by the new retroarch
stting replay_checkpoint_interval (measured in seconds). States are
inserted into the replay file in between frames.
This patch also fixes the settings display for the replay
autoincrement max keep setting.
* change bsv file suffix to replay, update strings
* add trivial RPLY block to save states
* WIP rerecording support, doesn't load states properly yet--issue with checking identifiers?
* Fixed a type error to get time identifiers working right, ready for testing
* handle case where state without replay data is loaded during replay
* cleanups
* whitespace cleanup
* Cleanups, change replay file format magic, fix logic around future states
* Remove failed future message
* Add play-replay-from-slot command, fix load-state-from-slot to use given slot
* build fixes
* Fix race conditions in emscripten build and incorrect replay state incrementing
* Style fix for single line if
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* add keyboard recording support to bsv
BSV movies recorded in older RA *WILL NOT* replay properly after this
patch. While looking to see if the core actually uses a keyboard
device could mitigate this, it is an unavoidable consequence of using
BSV, a format which carries no metadata whatsoever.
* Fix for loop declarations and some whitespace
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* BSV ergonomics improvements
- Date stamp toggled recordings instead of overwriting or using save
slot number
- Properly stop movie on playback EOF; also pause emulation
- Add recording flag to match playback flag in bsv state enum
- Rename bsv "movie path" to "movie auto path" to clarify role
- Allow stopping movie playback before EOF using record toggle hotkey
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* Allow for both -e and -R to start a BSV file recording at a state
The key issue is that loading a state takes some time, and the BSV
recording shouldn't start until that's done.
The minimal patch for this would just be a change to runloop.c which
moves movie initialization after entry state loading, throwing in a
task_queue_wait(). This makes for some awkward repeated autoload OSD
messages and doesn't solve the underlying issue.
Most of this change puts BSV recording start/stop into tasks, like
saving and loading are tasks; this was important to centralize BSV
operations a bit more and is the first part of a refactoring towards
more robust input recording. The necessary wait is introduced in the
begin-recording callback.
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
* Don't start video recording when BSV recording starts
* Don't double-record inputs in BSV recording
- Will this work properly with the part of input handling outside of
input_state_wrap? Who knows?
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
- Fix analog drift blocking touch input (could occur on overlay_next if physical inputs shown on overlay)
- Fix overlay_next buttons lighting up in unison
- Skip meta keys in input_overlay_add_inputs (not supported by input_state_internal)
Allows stretching hitboxes and handling their overlap
reach_up, reach_down, reach_left, reach_right:
- Stretches in one direction:
reach_x, reach_y
- Stretches symmetrically
exclusive:
- If true, blocks input from overlapped hitboxes
range_mod_exclusive:
- Similar, but only applies when this hitbox is extended by range_mod
- After range_mod takes effect, has priority over 'exclusive'
E.g. This creates a D-Pad area and extends its hitbox left & right 50%, up 15%, and down 30%. Then applies range_mod_exclusive:
overlay0_desc0 = "dpad_area,0.15,0.57,rect,0.166228,0.295516"
overlay0_desc0_reach_x = 1.5
overlay0_desc0_reach_up = 1.15
overlay0_desc0_reach_down = 1.3
overlay0_desc0_range_mod = 2.0
overlay0_desc0_range_mod_exclusive = true
- New descriptors: 'dpad_area' and 'abxy_area'
- Each has a diagonal sensitivity setting, 100% being 8-way symmetry
- Buttons can be redefined in the cfg file
E.g. This would create a d-pad area, then redefine it to use analog directions:
overlay0_desc0 = "dpad_area,0.85,0.57,rect,0.166228,0.295516"
overlay0_desc0_up = "r_y_minus"
overlay0_desc0_down = "r_y_plus"
overlay0_desc0_left = "r_x_minus"
overlay0_desc0_right = "r_x_plus"
Repurpose vibrate_on_keypress to enable device's standard keypress feedback on overlay key/button state changes
- Add keypress_vibrate function ptr to input_driver_t (only implemented on Android for now)
- (Android) Remove APP_CMD_VIBRATE_KEYPRESS
- (Android) Add doHapticFeedback, called directly to avoid latency
* * Use flags for rarch_state
* Get rid of ^M linebreaks in retroarch_types.h
* Buildfixes for consoles
* (audio driver) use flags instead of bools
* (video) Use flags instead of bools
* Rewrite input driver state bools into flags
* Reduce snprintf and/or use them only for concatenating the
string formatting of numbers/values
* Reduce snprintfs
* Use snprintf for concatenation at parts
* * We don't need to NULL-terminate strings that get passed to strlcpy/strlcat
and friends
* Use snprintf for concatenation in certain instances
* Do away with some string intermediary copies where we can avoid it
* Fix warning unused variable
* * Reduce snprintf calls
* Rewrite snprintf calls into strlcpy where possible
* Use snprintf for concatenation when necessary
* Do away with some string intermediary copies in task_translation.c
* run_translation_service - make switch slightly smaller
(snprintf) Try to reduce or simplify snprintf calls, only tend to
use it for processing integers/numbers and avoid it for regular
string concatenation (NOTE: we try to be a bit safer about it to
address earlier cited criticism, although we don't consider concatenating
3 or 4 characters at the end to be insecure)
(msg_hash_to_str) Try to avoid duplicate calls to the same localized
string when we can just cache the results once instead locally
- (database_info.c) Optimizations for database_info_build_query_enum() -
it would call strlcat at the very least 3 times, normally more than that.
Every strlcat call is at least one or more strlens. Reduce it all down
to manual string concatenation and one strlcat
- (database_info_build_query_enum) - always NULL terminates string so no need for NULL termination done by callee
* (menu_displaylist) use smaller strings for basename paths, remove one unnecessary string
in menu_displaylist.c function
- (disk_index_file.c) Avoid another trivial string concatenation by doing
it manually after fill_pathname_join_special
- (fill_pathname_join_delim) since fill_pathname_join_delim() now has a return value, use it for
string concatenation
- (platform_unix) - Use BUFSIZ as size for a buffer in system_property_get
- some other trivial strlcat usage replacements
as deprecated.
* Use fill_pathname_join_special in the vast majority of cases where
we can ensure out_path is a new empty string
* Get rid of some extension concatenation with strlcat where encountered
* Some general cleanups with NULL termination of strings that get immediately
passed to strlcpy/strlcpy-adjacent functions
* (joypad_connection) Small optimizations -
* Turn functions static where possible
* Hose strlen call out of loop
* (input_driver.c) General cleanups:
* Some small code/style nits
task_screenshot.c:
* Move widget callback function for screenshots to task_screenshot.c
(file_path.c):
* Turn get_pathname_num_slashes into static function
* path_linked_list_free - always returns true, so get rid of return value
* path_linked_list_new - fix function signature
* path_get_archive_delim - do not NULL-terminate string, already done by strlcpy later on
General:
* Slight optimizations - use int/size_t for loop counter variable instead of unsigned
* Take advantage of fact that strlcpy already NULL-terminates, so don't do this explicitly
outside if we're just going to end up calling strlcpy/fill_pathname_join on it anyway
* Any pad can control the menu
== DETAILS
I am not sure I've quite got it so that any pad can *open* the
menu, but I do have it so any pad can control it.
- split out the input processing into a separate method
- track down and squish some hairy bugs that boiled down to
bad pointer math
- it looks like `menu_driver.c` has a mix of line endings, so I
ran it through `dos2unix` so it has consistent line endings
again.
- verified that this change did not impact actual cores
* optimize out cumulative_bits
* Incorporate PR feedback
Many thanks to @jdgleaver for providing these optimizations.
* apply one more optimization
* Move more state to runloop state
* remove unused variable
* Cleanup
* Move more state to runloop_state
* Remove unused variable
* Cleanups
* move input_remapping functions over to input_driver.c
* Some buildfixes
== DETAILS
When I first implemented the Wii U HID architecture, I ended up
having to design my own implementation because, at the time, I did
not have a way to read the HID device string to allow the existing
code to successfully detect the gamepad.
After spending some time experimenting, I've figured out how to
do this. And that means I can better align the HID driver with other
platforms.
change summary:
- create a single state structure for all three sub-types of wiiu pads
(kpad, wpad, and hid)
- eliminate confusing duplicate pad lists
- eliminate confusing duplicate HID pad drivers (ds3, gamecube
adapter, etc)
- ensure the ds3 driver still works
libretroadmin