usage of strlcpy (when position/offset of previous strlcpy/snprintf call
is known. strlcat implementation in libretro-common makes implicit strlen
call, using strlcpy avoids this
* Reduce a bunch of local char variables by use of said clever usage,
should save up on local stack size usage
* Some slight fixes
* Update libretro.h
* Log calls to RETRO_ENVIRONMENT_GET_MICROPHONE_INTERFACE
* Finish proof-of-concept for mic support
- It works, but doesn't support floating-point audio yet
- It may need to be resampled, too
* Add macros that aren't available in SDL 2
* Comment out a variable definition for now
- For C89 compliance
* Add some comments for clarity
* Let ALSA tolerate a null new_rate
* Partial ALSA microphone support
- Not yet tested
- Mic is created and destroyed
- Mic can also be paused or unpaused
- Mic is paused or unpaused with the rest of the driver
- Microphone is not yet read
* Install error logging in the ALSA driver
- It defers to RARCH_ERR
* Free the ALSA microphone in alsa_free
* Fix an indent
* First draft of alsa_read_microphone
* Deinitialize SDL Audio in sdl_audio_free
* Save and restore the ALSA error logger
- You should always practice safe global state
* Add newlines to some RARCH_ERRs
* Add some logging
* Check for the mic being active via settings instead of via flags
* Adjusted a log entry to be less misleading
- A frequency of 0Hz looks weird to the uninformed
- In reality, it means the driver used the requested frequency
* Fix an incorrect format string
* Tidy up logging in alsa.c
* Rename audio_enable_microphone to audio_enable_input
* Rename microphone_device to audio_input_device
* Add audio_input_latency and audio_input_block_frames settings
* Add all mic-related settings to the options menu
* Adjust logging for alsa.c
- Log the ALSA library version
- Add errno details
* Refer to the microphone in logs by name
* Use %u instead of %d for some log items
* Add input_samples_buf
* Remove an inaccurate comment
* Change type of input_samples_buf
* Clean up audio_driver_flush_microphone_input
* Comment convert_float_to_s16
- It helped me understand what it's doing
- Turns out it'll work just fine on mono audio
* Don't use the resampler for mic input
* Fix crash in the ALSA driver when reading from a mic
* Update some logging messages
* ALSA support now works for mics
* Reuse some common functions in alsa.c
* Add alsa_thread_microphone_t
* Refactor alsa.c
- Introduce alsa_init_pcm to init any PCM that we're using
- Vastly simplifies the implementation of alsa_init and alsa_init_microphone
- Will be used for the read-based versions next
* Make ALSA logging a little more consistent
* Clean up the mic with alsa_free_microphone if alsa_init_microphone fails
* Remove an unused function
* Move some cleanup in alsa.c to a common function
* First crack at mic support for alsathread
- Refactor some duplicate code into functions
- Use functions introduced in alsa.c
- Create and destroy the mic
* Slight cleanups for clarity
* Implement alsa_thread_set/get_microphone_state
* More work on alsathread
- No more crashing, but the mic just returns silence
* Slight cleanups for clarity
* Add alsa_set_mic_enabled_internal
- For setting the state of a microphone while considering its current state
* Use alsa_set_mic_enabled_internal
* Log a little more info
* Log when the audio driver is started/stopped
* Move base microphone driver code into a new directory
- Add microphone_driver.c to Makefile.common
- Rename functions as needed
* Initialize and deinitialize the microphone driver
* Implement sdl_microphone.c
* Un-const an argument
- In case the driver context needs to do any locking
* Revise comments for microphone_driver.h
* Remove an unimplemented function
* Remove some functions from the mic driver
* Remove mic functions from audio_thread_wrapper
* Remove mic functions from sdl_audio
* Fix microphone_null
* Split the mic code for the alsa audio drivers into microphone drivers
* Fix an extra struct member
* Add a setting for the mic driver
* Add a command to reinitialize the microphone driver
* Rename mic-related settings
* Add DRIVER_MICROPHONE_MASK to DRIVERS_CMD_ALL
* Rename audio_enable_input to microphone_enable
* Remove some labels from qt_options
* Search for microphone_driver within find_driver_nonempty
* Clean up some mic driver code
* Pending mics now return silence
* Adjust some logging and comments
* Some cleanup in the microphone driver
* Invert a flag check
- Oops
* Fix a log message
* Fix the wrong flags being checked
* Slight refactor of wasapi_init_device
- Add a data_flow parameter
- Declare it in a header
- In preparation for WASAPI mic support
* Add some WASAPI macros for _IAudioCaptureClient
* Move some common WASAPI functions to audio/common/wasapi.c
- They'll be used by the mic and the audio drivers
* Add wasapi_log_hr
* Generalize mmdevice_list_new to look for capture devices, too
* Fix a function declaration
* Move driver-specific device_list_new functions into their respective files
* Clean up some declarations
* First draft of wasapi microphone driver
* Add wasapi_microphone_device_list_free
* Change function parameter names to be consistent with microphone_driver
* Partially implement wasapi_microphone_read
- Mostly copied from the audio driver so far
- It doesn't compile yet
- But it'll be beautiful when I'm done with it
* Refactor the mic driver's functions
- Rename get_mic_active to mic_alive
- Split set_mic_active into start_mic and stop_mic
- Refactor the SDL mic driver accordingly
* Edit some WASAPI functions for logging and clarity
* Implement more of the WASAPI mic driver
* Rename write_event to read_event
* Pass the WASAPI driver context to the various read functions
* Mostly implement the read function for the WASAPI mic driver
* Fix a crash in microphone_driver
- Forgot to move the position of the name of null_driver
* Reduce some logging in wasapi common functions
- Only log the chosen audio client format, not all attempted ones
* Add some macro wrappers for IAudioClient methods
* Update mic driver configuration
- Make the mic driver configurable in the menu
- Add config items for WASAPI-related options similar to the audio driver
* Fix a menu entry scrolling through audio devices instead of mic devices
* Add some utility functions
* Expose the new utility functions in wasapi.h
* Add extra logging in the WASAPI common functions
* Add sharemode_name
* Use _IAudioClient_Initialize macro in some places
* Pass channels to wasapi_init_client
- Remember, mics are in mono
* Use _IAudioClient_Initialize macro some more
* Forgot to pass channels in some places
* Add some utility functions
* Forgot an #include
* Add wasapi_select_device_format
* Simplify the format selection logic in wasapi_init_client_sh
* Unset the microphone in wasapi_microphone_close_mic
- Ought to prevent a potential segfault
* Simplify some logging
* Fix incorrect value being passed to _IAudioCaptureClient_ReleaseBuffer
* Remove some unneeded logging
* Add some values to hresult_name
* Polish up wasapi_select_device_format
- Test for formats manually when Windows can't
- Add some debug logging
- Check for channels
* Compute the fields of WAVEFORMATEXTENSIBLE correctly
- As per the doc's stated requirements
* Simplify logic for WASAPI client creation
* Fix a potential hang in wasapi_microphone_read_shared_buffered
* Stop the microphone if the driver is stopped
* Don't name the microphone event
* Ensure that wasapi_init_client reports the correct format and rate
* Implement exclusive microphone read access for WASAPI
* Add _IAudioCaptureClient_GetNextPacketSize macro
* Organize cases in hresult_name
* Clear some extra fields if wasapi_set_format is setting a Pcm format
* Adjust some logs
* Adjust some logs
* Remove unneeded local vars
* Add a log
* Update wasapi.c
* Update wasapi.c
* Fix shared-mode mic support in WASAPI producing broken input
- Turns out it had nothing to do with shared mode
* Reuse a common function
- Remove wasapi_microphone_read_shared_buffered
- Rename wasapi_microphone_read_exclusive to wasapi_microphone_read_buffered
* Remove some code I was using for test purposes
* Clarify some language
* Double the default shared-mode mic buffer length
* Split getting a device's name into a separate function, then use it
* Fix the ALSA mic drivers
- To comply with changes I previously made to the mic driver interface
* Remove unused synchronization primitives from the SDL microphone driver
* Add sdl_microphone_mic_use_float
* Document audio_driver_state_flags
- I needed to understand these to see if similar flags were required for the mic driver
* Remove an unused function in wasapi.c
* Add and document flags in microphone_driver.h
* Remove driver-specific mic start/stop functions
- The mic driver itself doesn't do much processing
- That honor goes to individual mics
* Remove some unused fields in microphone_driver.h
* Add CMD_EVENT_MICROPHONE_STOP/START
* Remove unused functions from microphone_null
* Change how the mic driver state is referenced in some places
* Simplify the SDL microphone driver
- The driver backend no longer keeps a reference to the mic (the frontend does that)
- Remove functions that are no longer needed
- Don't track paused state, just query the mic itself
* Simplify the WASAPI microphone driver
- Don't track the driver running state or the microphone handle, the frontend does that now
- Remove support for unbuffered input (hunterk suggested that it wasn't necessary)
* Make microphone_wasapi_sh_buffer_length a uint, not an int
- It won't be negative anymore
- 0 now represents the default value
* Make the microphone frontend more robust
- Improve documentation for how various functions should be implemented
- Closes all microphones before freeing the driver (so backends don't have to)
- Tracks the enabled state of each microphone, so backends don't have to (but they still can)
* Stop the mic driver in core_unload_game
* Ensure mic support is compatible with the revised menu code
* Move alsa.h into audio/common
* Remove RETRO_ENVIRONMENT_GET_MICROPHONE_ENABLED
- It was never really needed
* Refactor the ALSA microphone driver
- Move common ALSA functions to audio/common/alsa.c
- Replace alsa_set_mic_enabled_internal with alsa_start/stop_pcm
- Don't track the microphone handle in the ALSA driver context
- Remove unneeded fields
* Move some common alsathread code into audio/common/alsathread.c
* Change return type of mic_driver_open_mic_internal to bool
* First crack at resampling mic input
* Remove an extraneous check
- I think something distracted me when I was writing this line
* Add stereo/mono conversion functions
* Make alsa_start_pcm and alsa_stop_pcm more robust
- They now return success if the stream is already running and stopped, respectively
* Revise some mic-related comments in libretro.h
* First crack at resampling mic input
* Simplify an expression
* Simplify an expression
* Fix a log tag
* Allow mic resampler to be configured separately from audio resampler
* Add some comments
* Set the source ratio to something sensible
* Stop deadlock in `alsathread` mic driver
* Allow mics to be initialized even when core is loaded from CLI
- When loading content from CLI, the drivers are initialized a little differently
- That threw off the mic initialization code
* Rename the functions in retro_microphone_interface
* Revise some mic-related comments in libretro.h
* Update retro_microphone_interface
- Add get_mic_rate
- Add a parameter to open_mic
- The modifications don't do anything yet
* Use parameter objects in the microphone handle
* Replace get_mic_rate with get_params
* Add a microphone interface version
* Remove part of a comment
* Set the effective params in mic_driver_microphone_handle_init
* Drop a stray newline
* Change where the mic interface is zeroed
- I was accidentally throwing out the version that the core was asking for
* Reduce logspam for wasapi_set_nonblock_state
- Now it only logs when the sync mode is changed
* Change DEFAULT_WASAPI_SH_BUFFER_LENGTH to 0
- -16 is no longer a valid value
* Set the new_rate in wasapi_init
* Change description of microphone sample rate in the settings
* First attempt at resampling configured mic input
* Forgot a section
* Fix some input samples being skipped
* Rename a variable for clarity
* Add microphone.outgoing_samples
* Update the mic driver
- Processed samples are now buffered
- The resampler is skipped if the ratio is (very close to) 1
* Remove part of a comment
* Update some comments in audio_resampler.h
* Slightly refactor the SDL microphone driver
- Move SDL_AudioSpec to a field of sdl_microphone_handle_t
- Allow SDL to change the requested format and sample rate
- Request floating-point input
- Implement sdl_microphone_mic_use_float
* Fix a non-C89-compliant declaration
* Add new files to griffin.c
* Remove a C++-style comment
* Add two more files to griffin.c
* Remove some unneeded declarations in microphone_driver.h
* Remove a stray comma in configuration.c
- For C89 compliance
* Fix compilation on some platforms
* Change some function signatures
* Make the ALSA drivers always set the audio rate
* Fix the alsathread mic driver
* Make state_manager_frame_is_reversed return false if HAVE_REWIND isn't defined
* Mute the microphone if the core is running in fast-forward, slow-mo, or rewind
* Clarify a comment
* Clarify a comment
* Add a comment
* Don't allocate memory for slowmo samples in the mic driver
- We're not supporting slowmo for mics, so it's not needed
* Fix a {
* Add my name to AUTHORS.h
* Add driver_lifetime_flags
- For drivers that have special setup/teardown needs
* Ensure that resetting the mic driver maintains active mic handles
- Prevents fullscreen toggle from stopping all mic input
* Update CHANGES.md
* Move some default microphone settings to a new part of the config file
* Ensure that RetroArch can use the audio format that Windows suggests
* Remove references to mic support in the SDL audio driver
* Remove unused WASAPI functions
* Return failure if RetroArch couldn't select a WASAPI format
* Ensure that Windows uses the WASAPI mic driver by default
* Treat disabled mic support as a warning, not an error
* Clarify some WASAPI-related microphone settings
* Remove some unused variables
* Add or revise microphone-related comments
* Rearrange doc comments for microphone types in libretro.h
* Remove a space
* Remove some unused flags
* Remove ALSA error logger
- It was never used anyway
* Remove unneeded microphone-related arguments
* Document a parameter
* Remove a logging call
* Add a constant for the microphone's shared buffer length for WASAPI
* Fix stylistic inconsistencies
* Make mic_driver_get_sample_size a macro instead of a function
* Move the microphone implementation to the audio directory
* Make microphone support optional (but enabled by default)
* Fix the griffin build
* 🎵 Fast forward audio resampling. Solves #15160.
Previously, we avoided doing any resampling while fastforwarding based
on the assumption it was impossible to make the audio not crackle due to
both flush-to-flush timing fluctuations and timer accuracy.
However, turns out this is not the case. The audio doesn't "crackle" per
se when the timing fluctuates! It's just that the sounds don't make
sense since the time compression and decompression caused by the flush
time fluctuations mess with the audio consistency.
To work around that, we introduce a running average flush delta time
that makes sure the audio is both resampled to approximately the correct
rate and consistent.
This was tested in two settings:
- Limited rate fastforwarding (2x-4x)
- Unlimited fastforwarding
In both cases it seems to work well, but with unlimited fastforwarding
it's just high pitched and annoying, so this is probably the most useful
in the 2x to 4x range.
* Move declartion to support C89
* resampling ratio upper and lower bounds
* Add toggle for speeding up audio
* Prepare to update deps/switchres
* Squashed 'deps/switchres/' content from commit ca72648b32
git-subtree-dir: deps/switchres
git-subtree-split: ca72648b3253eca8c5addf64d1e4aa1c43f5db94
* Add CRT modeswitching to KMS
Display the real refresh rate
Enable the CRT SwitchRes menu
Add another switchres.ini path for Lakka
If cores are not deterministic, or if they only have bounded
determinism, we can obtain less drift if replay files also contain
periodic checkpoint states. These are configured by the new retroarch
stting replay_checkpoint_interval (measured in seconds). States are
inserted into the replay file in between frames.
This patch also fixes the settings display for the replay
autoincrement max keep setting.
* Add bsv replay controls (not yet fully implemented), remove toggle
see notes in task_movie.c, make sure command.c calls the right
functions, check retroarch.c and other todos.
bsv files are also now stored with states, not saves.
* Compilation fixes
* Added command impls for play and record replay, and some code in load state to do the right thing there
* Guard some parts of the new code with HAVE_BSV_MOVIE
* wip, menu fixes
* more menu fixes, osd for movie errors, halt recording properly
* Menu and label fixes
* move bsvs to own file suffix series under savestates, fix recording and playback command validity checks
* Fix replay autoincrement
* fix endif placement, whoops
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
ever implemented for OpenGL2 driver, lots of code debt, best to
instead just keep improving the overlay system instead which is
already available for most video drivers
Disabling the built in media player should be possible for music files
as well. Without this, sound files can not be opened from file browser
with cores that support them.
* remove var error in psl1ght input
* (psl1ght) add modern_alpha_blend and modern_opaque rsx shaders
* (psl1ght) add perf improvements to the rsx driver
* add rsx gfx for psl1ght
* (psl1ght) set rsx as a compatible video driver
* Do xmb menu scaling for psl1ght
* (psl1ght) update Makefile to use latest shaders and more UI menu options
* Use "Remember window position and size" setting (fixes#14806)
* Implement window opacity
* Enable "Show window decorations" toggle
* Hide "Disable composition" option (osx does not support disabling composition)
Add Help button (Select) and Reset to Default (Start) to footer where applicable.
Display Help footer only if there is actual info to be displayed, either
actual help, or sublabel if it is not visible otherwise.
* msg_hash_us.c contents to Crowdin, phase 2
Remaining part of the fixed strings moved to msg_hash_us.h, and some other changes:
- added help text for individual menu drivers
- prepared help labels for video drivers
- prepared help labels for input drivers
- old entries from the now defunct help menu are hidden from compilation
(may be added back later, when the menu is again visible)
- moved notification color/bgcolor items to sublabels
- language fixes from phase 1 comments
* c89 compilation fixes
* Compilation fix for Android builds
* msg_hash_us.c contents to Crowdin, phase 2
Remaining part of the fixed strings moved to msg_hash_us.h, and some other changes:
- added help text for individual menu drivers
- prepared help labels for video drivers
- prepared help labels for input drivers
- old entries from the now defunct help menu are hidden from compilation
(may be added back later, when the menu is again visible)
- moved notification color/bgcolor items to sublabels
- language fixes from phase 1 comments
correctly get list size in xmb.c for playing scrolling sound when switching categories, play the scrolling sound when pressing cancel in ozone, play the sound when scrolling with ZL and ZR, play the correct sound when scrolling with L
The closing info box sound (NOTICE_BACK) plays if you have the regular notice sound on, implemented generally.
audio_driver_mixer_play_menu_sound(i) will now stop sound i before playing it, so when you for example, cancel in rapid succession, it will properly play all canceling sound effects instead of not doing anything if the sound is already playing.
This scrolling implementation is a lot more general than the first one, to the point where RGUI plays all the correct sounds without any special additions. However, the Ozone sidebar scrolling or category switching in XMB or MaterialUI are still handled inside their driver .c files.
This implementation also fixes an issue where if wraparound was disabled the sound would still play if you held on a direction. I've also fixed it manually for XMB category switching, since it's still handled there individually (turns out, Ozone sidebar and MaterialUI categories just don't respect the no wraparound option, so there's no need to implement a fix there as well)
- 'Unlocks/Mastery' split into two options
- 'Account/Login Messages' split off from 'Verbose', gated all login success/error messages
- menu_cbs_sublabel.c - Now in same order as menu options
- menu_setting.c - VISIBILITY_UNLOCK default value now uses define
- All suggested text/cleanup changes from Jamiras
- Startup Summary split off from Verbose Mode, added option to hide for games with zero core cheevos
- Some existing options moved into this submenu
- Leaderboard-related options coming in future PR
When running on Android, RetroArch considers most devices that emit dpad events as gamepads, even if they also emit other keyboard events; this is usually the right thing to do, but it has the side effect of not letting some actual keyboards (e.g.: Logitech K480) act as such inside RetroArch. This configuration option allows users to manually select a specific input device to act as a physical keyboard instead of a gamepad, which is handy when emulating computers as opposed to consoles.
also adds audio_driver_mixer_play_scroll_sound to menu_cbs_left and menu_cbs_right which are (seemingly) responsible for the large scroll on some menus (and also bumper scrolling on glui's playlist menu?).
using roughly the same implementation for the ok/notice/cancel sounds, but i've made an exclusive function for scrolling since it's going to be called a lot more than those sounds
* Allow repositioning of achievement notifications
* PS4/ORBIS build fix
Would have thought cheevos-related notification code was wrapped in HAVE_CHEEVOS, but guess not.
Display translation completeness categories in the language selection options.
Generate the progress report for RetroArch menu file instead of all files.
* Allow disabling "Update Core Info" from Online Updater
* Add ASSETS_DIR as an alternative to DEFAULT_DIR_ASSETS
* Add FILTERS_DIR configuration option
* Fix other platform_unix.c platforms
* Conditionally use ASSETS_DIR/FILTERS_DIR
WIP version of Append and Prepend preset, Includes UI for Standard Retroarch, but not the QT UI companion
Co-authored-by: HyperspaceMadness <remimcgill@hotmail.com>
- New descriptors: 'dpad_area' and 'abxy_area'
- Each has a diagonal sensitivity setting, 100% being 8-way symmetry
- Buttons can be redefined in the cfg file
E.g. This would create a d-pad area, then redefine it to use analog directions:
overlay0_desc0 = "dpad_area,0.85,0.57,rect,0.166228,0.295516"
overlay0_desc0_up = "r_y_minus"
overlay0_desc0_down = "r_y_plus"
overlay0_desc0_left = "r_x_minus"
overlay0_desc0_right = "r_x_plus"
Repurpose vibrate_on_keypress to enable device's standard keypress feedback on overlay key/button state changes
- Add keypress_vibrate function ptr to input_driver_t (only implemented on Android for now)
- (Android) Remove APP_CMD_VIBRATE_KEYPRESS
- (Android) Add doHapticFeedback, called directly to avoid latency
* Add View feature
Add saving of a filter set in the Explore menu into a so called "View" file which then gets listed alongside playlists.
This also adds the ability to filter a category by range in the Explore menu and not just filter on exact matches.
* Menu improvements for explore and views
* Collapse ozone sidebar in view
* Fix problems with the sidebar in explore/view
* Ignore view files in the Qt playlists menu
* Add missing semicolon
* Support downloading thumbnails in views
* * Use flags for rarch_state
* Get rid of ^M linebreaks in retroarch_types.h
* Buildfixes for consoles
* (audio driver) use flags instead of bools
* (video) Use flags instead of bools
* Rewrite input driver state bools into flags
* New Menu Items Disable Info & Search
Add menu options for disabling Info and Search buttons
* Update msg_hash_us.h
Update Sublabels
* Update menu_setting.c
Set Advanced flag for new settings
* Don't do snprintf calls in loops that can be done once outside
* Try to prevent some msg_hash_to_str calls in loops
* Add FIXME/TODO localize notes to hardcoded strings
* Reduce some snprintf calls by moving them out of if/else blocks
* Simplify early return path for one function
* Reduce snprintf and/or use them only for concatenating the
string formatting of numbers/values
* Reduce snprintfs
* Use snprintf for concatenation at parts
* * We don't need to NULL-terminate strings that get passed to strlcpy/strlcat
and friends
* Use snprintf for concatenation in certain instances
* Do away with some string intermediary copies where we can avoid it
* Fix warning unused variable
* * Reduce snprintf calls
* Rewrite snprintf calls into strlcpy where possible
* Use snprintf for concatenation when necessary
* Do away with some string intermediary copies in task_translation.c
* run_translation_service - make switch slightly smaller
one - if you set the last parameter to a valid 'rarch_setting_t' pointer
and enum_msg to MSG_UNKNOWN, you will get the previous menu_entries_append
behavior
* Renamed remaining function to menu_entries_append so that we have one
consistent way of adding menu entries instead of two
Reduces some code duplication significantly
(menu_displaylist.c) Some optimizations:
* Make sure val_d is never bigger than 16, it should just
contain a number. 16 is more than plenty (and probably too big even)
* Hose val_d out of loops if its value never changes inside the loop
* Attempt to avoid calling msg_hash_to_str inside loops unnecessarily
* Don't attempt to call msg_hash_to_str in a loop, cache it once outside
inside a local variable
* Do away with some spurious snprintf usage for RGUI (truncation does not matter
as pointed out by jdgleaver, so we needn't be concerned)
(snprintf) Try to reduce or simplify snprintf calls, only tend to
use it for processing integers/numbers and avoid it for regular
string concatenation (NOTE: we try to be a bit safer about it to
address earlier cited criticism, although we don't consider concatenating
3 or 4 characters at the end to be insecure)
(msg_hash_to_str) Try to avoid duplicate calls to the same localized
string when we can just cache the results once instead locally
Avoids the internal strlen call inside strdup, and strdup is a deprecated
function starting from MSVC2005 anyways.
NOTE: Do NOT pass STRLEN_CONST as n parameter to strldup, it needs to
be at least +1 character higher than the strlen return value of the same
string
Reasons:
1 - Just a macro for strcpy
1.2 - doesn't have a return type unlike strlcpy, can't be used
for string concatenation
1.3 - unsafe compared to strlcpy
Do either manual string assignment per character or strlcpy, no
inbetween by resorting to strcpy
(retroarch.c) retroarch_get_capabilities - get rid of strlcat
party in RARCH_CAPABILITIES_CPU, do simple manual assignment for
concatenation instead and NULL terminate at the end
(menu_displaylist.c) Do something about some of the unnecessarily huge
local strings of PATH_MAX_LENGTH size (can be as large as 8192)
(menu_displaylist.c) Replace some trivial strlcats / snprintfs
(D3D10/D3D11/D3D12) Strings don't need to be initialized -
strlcpy already null-terminates - get rid of some constants
- (database_info.c) Optimizations for database_info_build_query_enum() -
it would call strlcat at the very least 3 times, normally more than that.
Every strlcat call is at least one or more strlens. Reduce it all down
to manual string concatenation and one strlcat
- (database_info_build_query_enum) - always NULL terminates string so no need for NULL termination done by callee
* (menu_displaylist) use smaller strings for basename paths, remove one unnecessary string
in menu_displaylist.c function
- (disk_index_file.c) Avoid another trivial string concatenation by doing
it manually after fill_pathname_join_special
- (fill_pathname_join_delim) since fill_pathname_join_delim() now has a return value, use it for
string concatenation
- (platform_unix) - Use BUFSIZ as size for a buffer in system_property_get
- some other trivial strlcat usage replacements
(menu_contentless_cores) Fix mistake - needed to set len to return
value of fill_pathname_join_special
(configuration.c) Fix some unused variable warnings on Linux
as deprecated.
* Use fill_pathname_join_special in the vast majority of cases where
we can ensure out_path is a new empty string
* Get rid of some extension concatenation with strlcat where encountered
* Some general cleanups with NULL termination of strings that get immediately
passed to strlcpy/strlcpy-adjacent functions
* (joypad_connection) Small optimizations -
* Turn functions static where possible
* Hose strlen call out of loop
* (input_driver.c) General cleanups:
* Some small code/style nits
task_screenshot.c:
* Move widget callback function for screenshots to task_screenshot.c
(file_path.c):
* Turn get_pathname_num_slashes into static function
* path_linked_list_free - always returns true, so get rid of return value
* path_linked_list_new - fix function signature
* path_get_archive_delim - do not NULL-terminate string, already done by strlcpy later on
General:
* Slight optimizations - use int/size_t for loop counter variable instead of unsigned
* Take advantage of fact that strlcpy already NULL-terminates, so don't do this explicitly
outside if we're just going to end up calling strlcpy/fill_pathname_join on it anyway
sonninnos