* platform_win32: Fix sizeof for DEFAULT_DIR_PLAYLIST.
* frontend/drivers/platform_win32.c (frontend_win32_env_get): Check
the size of correct destination array.
* frontend: Honor the LIBRETRO_ASSETS_DIRECTORY environment variable.
This builds on 763fcd8267 ("unix, win32: Allow set the default
libretro_directory via environment variable") to also allow specifying
the assets directory via an environment variable.
* frontend/drivers/platform_unix.c (frontend_unix_get_env)
<libretro_assets_directory> New variable. Use it to set
DEFAULT_DIR_ASSETS, when available.
* frontend/drivers/platform_win32.c (frontend_win32_env_get): Likewise.
* platform: Honor the LIBRETRO_DIRECTORY environment variable.
Until now, and unlike the defaut core directory, the default
core *info* directory would be hard-coded relative to the installation
directory. Honor the LIBRETRO_DIRECTORY environment variable the same
instead.
* frontend/drivers/platform_unix.c (frontend_unix_get_env): Set
DEFAULT_DIR_CORE_INFO default to the value of the LIBRETRO_DIRECTORY
environment variable, if available.
* frontend/drivers/platform_win32.c (frontend_win32_env_get): Likewise.
* platform: Honor the LIBRETRO_AUTOCONFIG_DIRECTORY environment variable.
* frontend/drivers/platform_unix.c
(libretro_autoconfig_directory): New variable.
(frontend_unix_get_env): Set DEFAULT_DIR_AUTOCONFIG to the value of
the LIBRETRO_AUTOCONFIG_DIRECTORY environment variable, if available.
* frontend/drivers/platform_win32.c: Likewise.
* platform: Honor the LIBRETRO_VIDEO_FILTER_DIRECTORY environment variable.
* frontend/drivers/platform_unix.c
(libretro_video_filter_directory): New variable.
(frontend_unix_get_env): Set DEFAULT_DIR_VIDEO_FILTER to the value of
the LIBRETRO_VIDEO_FILTER_DIRECTORY environment variable, if available.
* frontend/drivers/platform_win32.c: Likewise.
* platform: Honor the LIBRETRO_VIDEO_SHADER_DIRECTORY environment variable.
* frontend/drivers/platform_unix.c
(libretro_video_shader_directory): New variable.
(frontend_unix_get_env): Set DEFAULT_DIR_SHADER to the value of
the LIBRETRO_VIDEO_SHADER_DIRECTORY environment variable, if available.
* frontend/drivers/platform_win32.c: Likewise.
* platform: Honor the LIBRETRO_SYSTEM_DIRECTORY environment variable.
* frontend/drivers/platform_unix.c
(libretro_system_directory): New variable.
(frontend_unix_get_env): Set DEFAULT_DIR_SYSTEM to the value of
the LIBRETRO_SYSTEM_DIRECTORY environment variable, if available.
* frontend/drivers/platform_win32.c: Likewise.
* configuration: Have environment variables override configuration.
Because the configuration file is systematically written when
RetroArch terminates, persisting any previous default/configured
value, setting the LIBRETRO_DIRECTORY, LIBRETRO_ASSETS_DIRECTORY, etc.
environment variables would not have an effect unless the
retroarch.cfg configuration file was cleared.
This seems to go against the common expectation that environment
variables are set by users to *override* the default behavior or
configuration of an application.
* configuration.c (config_load_file) <libretro_directory>
<libretro_assets_directory, libretro_autoconfig_directory>
<libretro_system_directory, libretro_video_filter_directory>
<libretro_video_shader_directory>: New variables. Use the values of
the LIBRETRO_DIRECTORY, LIBRETRO_ASSETS_DIRECTORY,
LIBRETRO_AUTOCONFIG_DIRECTORY, LIBRETRO_SYSTEM_DIRECTORY,
LIBRETRO_VIDEO_FILTER_DIRECTORY and LIBRETRO_VIDEO_SHADER_DIRECTORY
environment variables instead of their corresponding configured
values, when set.
* docs/retroarch.6: Document the environment variables honored and
their behavior.
* Less string copies
* Some general cleanups
* Add extra param to runloop_message_queue_push so we can pass size_t
of the message
* Consistent conventions for local variable usage for certain things
User slot (player #) and joypad driver port is by default the same, but
it can be changed either manually or automatically (reserved device).
Use the correct index for detecting values associated with the port.
Two new settings added to Settings / Input / Menu Control:
- disable left analog stick in menu navigation
- disable right analog stick in menu navigation
Since the corresponding logic is already a distinct logic flow in
input driver, no change was necessary to analog-to-digital settings
or the like.
* sort remaps by connected controller if option is enabled
* ensure dir name is valid based on input device name
* Fix comments
* Fix forbidden mixed declarations and code
* fixing build errors
* fix additional build warning/error
* Resolved code review change requests
* Changed strlcat to strlcpy as per recommendation
* Retrigger checks
* Use proper path separator.
* Ensure default value is toggled off.
* Ensure that gamepad device name is valid.
* Massive reduction in heap space allocation, going from settings struct
264kb to 119Kb
* Use NAME_MAX_LENGTH for base paths/names, etc
* Use DIR_MAX_LENGTH for directory sizes
* This change allows playlist icons to be replaced with Logos. the art is loaded to the Thumbnail Named_Logos folder. It is treated the same as other thumbnails for naming and for automatic download. There is a settings menu option to turn it on and off. It is off by default. This only applies to the xmb menu driver.
* Removed commented out code against the style guide.
* Code cleanup for C89 compatibitity
* Cleaned up errors from Automated CI.
* Cleaned up comments.
* Update gfx_display.c
change strcpy to strlcpy
* Update gfx_thumbnail_path.c
fix code formatting
* Update xmb.c
code formatting changes
Allow thumbnails (boxart, title, screenshot) to be loaded in any
other supported format as well, currently jpg, bmp, tga.
Support is for local thumbnails only, downloads are not changed.
PNG format is always preferred. Menu option added for control,
since trying for multiple thumbnail files may impact performance
on slow storage media.
A new input driver (test_input), similar to test joypad driver.
Takes its inputs from a json file provided in options. Supports
keyboard input and sensor input (accelerometer, gyroscope,
illuminance).
Remote Retropad extended with a sensor test screen.
For each player, 2 new options are added:
- a reservation type (no reservation, preferred, reserved)
- a reserved device name
When handling port - player assignments, reserved devices
will be assigned to the respective player port. If reservation
type is "reserved", no other device can take that port
automatically.
Reservation config option and matching function lifted from:
PatrickStankard https://github.com/libretro/RetroArch/pull/16269
Test joypad driver was extended for more tests.
Co-authored-by: Patrick Stankard <me@patrickstankard.com>
* iOS/tvOS: bundle cores as frameworks as opposed to dylibs
* iOS/tvOS: update plist to indicate controller support
* iOS/tvOS: living within the sandbox
* iOS/tvOS: import content through share sheet
* iOS/tvOS: default audio sync off due to crash on background
* iOS/tvOS: don't try altkit if there's no reason to
* iOS/tvOS: enumerate cores for appstore distribution
* Add grab_mouse interface for Android
Makes mouse grabbing and 'Game Focus' work on Android with a real mouse
Properly handle relative mouse motion events on Android (SDK 28 and newer)
* Enable workflow_dispatch on CI Android
* Update android_mouse_calculate_deltas callsites
* Add RETRO_DEVICE_MOUSE to android_input_get_capabilities
* Use Handler to trigger UI events (toggle mouse, immersive mode) with 300ms delay
* Enable input_auto_mouse_grab by default for Android
* Handle RARCH_DEVICE_MOUSE_SCREEN in Android input driver
* Add android.hardware.type.pc to manifest
* Don't attempt to set pointer speed via scaling in android_mouse_calculate_deltas
* Keep x/y values within viewport resolution for screen mouse
* Use video_driver_get_size to get width/height
---------
Co-authored-by: Bernhard Schelling <14200249+schellingb@users.noreply.github.com>
* Test driver for joypad inputs
Add a new joypad input driver:
- hide driver behind #ifdef and enable it in config_params.sh
- add a new config parameter to specify the test input file
- add aux files: additional config files that cancel out any binds
that may be present in RA config, autoconfig profile for
test joypads, test input file that matches controller test
sequence
* Fixes and comments for test input driver.
- When enabled, any touch inputs not in a hitbox are used to create pointing device input for the core.
- Mouse: 1-, 2-, 3-touch inputs are LMB, RMB, and MMB
- Lightgun: allows input from overlay buttons or multi-touch mappings
Autoconfig profile may be useful for e.g. submitting to autoconfig
repo. Construction of the filename is moved to a separate function
and reused for message.
Adds support for sub-frame shaders to vulkan/glcore/dx10-11-12.
Builds on the concept already present for frame duplication in use for BFI, to present multiple 'sub' frames per real frame to the shaders, so they can run at a higher framerate than the content framerate. Must be enabled via subframe shaders setting under synchronization settings to be active.
Will allow BFI to be implemented inside of the shaders, among any other use for the higher framerate shader authors can devise.
CurrentSubFrame and TotalSubFrames have been available inside the shaders to track what they want to do on an given subframe. TotalSubFrames will always be 1 when the setting is disabled (and when in menu/ff/pause). Framecount will not increment on sub-frames, as it does not for injected bfi frames now. Should not interfere with any existing shaders that do not check for subframes.
Loading the last used disc for multi-disc content was automatic.
However, in some cases it is not wanted, as described in #16018
Option is added for controlling the function. Disabling the
option will also implicitly disable index saving.
commit 793d41c303206b43932ddcefd44a45836def55eb
Author: Ophidon <jrogers2@gmail.com>
Date: Fri Jan 19 23:12:31 2024 -0500
Build Fix 2
Move declarations of iterators.
commit c0e959b3d3cd773a66a17cfe034f08eaa53d525a
Author: Ophidon <jrogers2@gmail.com>
Date: Fri Jan 19 22:57:01 2024 -0500
Build Fix
Help string was 14 characters too long for c89.
commit fc5506c7906bf82d6f88b7b0d7e4764d58d90622
Author: Ophidon <jrogers2@gmail.com>
Date: Fri Jan 19 22:40:45 2024 -0500
BFI Updates
Significant BFI updates.
- Adds BFI to dx10/11/12 in general.
- Updates existing BFI menu option descriptions to be somewhat more clear in how to use correctly.
- Adds Variable Strobe length via new 'Dark Frames' bfi sub-choice. Only valid at 180hz and above, as it must work with whole frames.
- Algorithm to auto select 'decent' Dark Frames choice, for any given selected BFI refresh rate. Will also avoid defaults that can cause Image Retention at any Hz higher than 120. (Impossible to avoid at 120 if you have an affected screen... get an OLED :D ) .
- Some sanity checking on selecting BFI or the other synchronizations options like Swap Interval > 1, that don't play well with BFI.
Thumbnail packs are no longer available, but the option was still
present as "legacy thumbnail downloader". Since it serves no
purpose any more, it is removed from the code.
* Add xdelta in deps
* Include <assert.h> in xdelta3.h
- Otherwise the static_assert calls can fail
* Build xdelta3 in Makefile.common
* Add xdelta support to the softpatching infrastructure
- The patching itself isn't fully implemented yet
* Adjust how xdelta3.h checks the sizes of some types
- Now checks max values instead of relying on autotools
* Add some enums that were excluded by the cherry-pick
* Remove stray whitespace
* Adjust SIZE macros in xdelta3.h
- Move them outside the XD3_USE_LARGEFILE64 block
- Add more SIZE declarations
- Make SIZEOF_UNSIGNED_LONG_LONG contingent on the presence of ULLONG_MAX
* Reintegrate xdelta support
* Enable support for xdelta's secondary compressors
- Necessary for some patches
* Fix some format specifiers
* Remove unnecessary files from xdelta
* Include xdelta3.h with a relative path
* Add xdelta3 headers to HEADERS variable
* Gate Xdelta support behind HAVE_XDELTA
- HAVE_XDELTA is on by default
- HAVE_PATCH is still required for HAVE_XDELTA to be meaningful
- Support is mostly contingent on the availability of LZMA
- Anything modern should be okay
- Legacy platforms (e.g. DOS) may need to have Xdelta support disabled
- At least until some other solution can be found
* Disable HAVE_XDELTA on platforms where the build recently failed
- These come from looking at the failed builds on GitHub
- These are guesses, and may turn out to be wrong
* Fix a potential memory leak
- Whoops, looks like I need to call two cleanup functions
- xd3_close_stream exists separately from xd3_free_stream
* Split the --help printout for --xdelta into its own strlcat call
- GCC was complaining about #ifdefs within macro arguments being non-portable
* Fix some incorrect printf format specifiers
* Modify Xdelta to adhere to C89
- It's mostly using RetroArch's INLINE macro instead of the inline keyword
* Slight cleanups
* Remove a stray comma that was hindering C89 builds
* Add XDelta support to CHANGES.md
* Change how the xdelta patch's name is computed
- To be in line with other recent refactoring
* Fix an incorrect merge
- Whoops, this part was from before I figured out how to get the size of a patched file
* Explain the song-and-dance behind computing a patched file's size
* Define some XDelta3-related constants to 0 on 32-bit platforms
* Adjust some Xdelta-related macro definitions
- Exclude the encoder, since we're not making patches
- Move some #defines to after inclusion of <stdint.h>, to fix undefined behavior
- Remove _WIN32_WINNT overrides, since they were for code that we're not using
* Fix Xdelta support
* Wrap an encoder-only function in `#if XD3_ENCODER`
* AI service rework
* File missing
* Fixed C89 build
* Fixed usage of inline for C89 build
* Fixed an overlay unloading bug
Made sure to unload the overlay on release and when the server returns empty values in automatic modes.
* Fixed forward decl (c89)
* Fixed OpenGL texture loading
Moved image display to the main thread for now
* Changed some formatting slightly
* Fixed struct variable order and put brackets on newlines
* Moved pointer, fixed retroarch.cfg, and replaced strlcat with strlcpy
* Fixed catenation issue
* Fixed a few other catenation issues
* Fixed one more concatenation issue
* Fixed concatenation issue
* Fixed a few other concatenation issues
* Fixed one more concatenation issue
* potential fix for parsing issue
---------
Co-authored-by: Xunkar <329857+xunkar@users.noreply.github.com>
* Lakka: Switch: Decouple From LibNX builds.
* Lakka: Always show Power Management Settings menu
* Lakka: Switch: Add Nintendo Switch Options Menu, and First Option
* Lakka: Switch: Add CEC Toggle
* Lakka: Switch: Add Bluetooth ERTM Toggle
* Retroarch: unix platform: Always display battery meter even when the device reports it as unknown
This is useful for most arm devices that have unknown battery status until charger state changes
* Retroarch: Lakka: Remove Gamemode stuff from build
Lakka will never include this, as it only runs base system, and retroarch.
Apteryks