forgot to add

PsxHawk.Core/psx.sio.cpp

@@ -0,0 +1,102 @@
+/*
+this file contains the sio subsystem emulation.
+*/
+
+#include "psx.h"
+#include <assert.h>
+#include <stdio.h>
+#include <stddef.h>
+
+
+static u8 getPrescaler(const u32 prescaler_type)
+{
+	static const u8 prescalers[] = {0,1,16,64}; 
+	return prescalers[prescaler_type];
+}
+		
+
+//information in this file is derived from observatoins in mednafen and mame
+
+void PSX::SioController::Reset()
+{
+	status.TX_EMPTY = 1;
+	status.TX_RDY = 1;
+	status.RX_RDY = 0;
+	status.OVERRUN = 0;
+	status.IRQ = 0;
+}
+
+float PSX::SioController::CalculateBaud()
+{
+	return (float)PSX_CLOCK / this->baud_reg / getPrescaler(mode.prescaler_type);
+}
+
+void PSX::sio_wr(const int size, const u32 addr, const u32 val)
+{
+	assert(size==2);
+	assert((addr&1)==0);
+	DEBUG_SIO("sio write size %d addr %08X = %08X\n",size,addr,val);
+	const u32 portnum = (addr>>4)&1;
+	SioController &port = sio[portnum];
+	
+	switch(addr&0xF)
+	{
+	case 0x00:
+		break;
+	case 0x08:
+		port.mode.value = val;
+		printf("baud set to approx %f\n",port.CalculateBaud());
+		break;
+	case 0x0A:
+		{
+			SioController::ControlReg reg;
+			reg.value = val;
+			if(reg.RESET)
+			{
+				DEBUG_SIO("reset port %d\n",portnum);
+				port.Reset();
+			}
+			if(reg.IACK)
+			{
+				port.status.IRQ = 0;
+				port.control.IACK = 0;
+				//todo - irq sync
+			}
+
+			//check for rising edge of DTR signal and alert the appropriate port
+			if(port.control.DTR == 0 && reg.DTR == 1)
+			{
+				sio_dtr(port.control.PORT_SEL);
+			}
+
+			//replicate stored bits
+			port.control.TX_IENA = reg.RX_IENA;
+			port.control.RX_IENA = reg.RX_IENA;
+			port.control.DSR_IENA = reg.DSR_IENA;
+			port.control.DTR = reg.DTR;
+			port.control.PORT_SEL = reg.PORT_SEL;
+		}
+		break;
+	case 0x0E:
+		port.baud_reg = val;
+		printf("baud set to approx %f\n",port.CalculateBaud());
+		break;
+	default:
+		DEBUG_SIO("UNHANDLED\n");
+	}
+}
+
+void PSX::sio_dtr(const u32 port)
+{
+}
+
+u32 PSX::sio_rd(const int size, const u32 addr)
+{
+	assert(size==2);
+	assert((addr&1)==0);
+	u32 ret = 0;
+	DEBUG_SIO("sio read size %d addr %08X = %08X\n",size,addr,ret);
+	const u32 port = (addr>>4)&1;
+
+	return 0;
+}